• Parasites, Hosts and Diseases
• /
• 제61권1호
• /
• pp.53-59
• /
• 2023

Head louse infestation is a significant public health problem across the world, particularly among preschool and primary schoolchildren. This study investigated the trends of head louse infestation in the Republic of Korea over a 9-year period (2011-2019), targeting primary schoolchildren in 3 areas of Seoul, 4 other large cities, and 9 provinces. A survey was administered annually by the health staff of each regional office (n= 16) of the Korea Association of Health Promotion (KAHP). The branch offices of KAHP examined a total of 51,508 primary schoolchildren, comprising 26,532 boys and 24,976 girls. Over the 9-year survey, a total of 1,107 (2.1%) schoolchildren tested positive for adults and/or nits of Pediculus humanus capitis. The prevalence was 2.8% (133/4,727) in 2011-2012 and gradually decreased to 0.8% (49/6,461) in 2019 (P< 0.05). Head lice were found more frequently in girls (3.0%; 746/24,976) than in boys (1.4%; 361/26,532) (P< 0.05). In terms of geographic localities, the highest infestation rate, 4.7% (average prevalence over 9 years), was observed in southern Seoul (Gangnam branch of KAHP), whereas the lowest infestation rate, 0.7%, was seen in Gyeongsang (north and south provinces) and western Seoul. Although the prevalence decreased significantly during the 9-year period, head louse infestation remains a health and hygiene issue among primary schoolchildren in the Republic of Korea. Regular surveys along with health education are needed to further improve children's hair hygiene.

• International Journal of Railway
• /
• 제2권2호
• /
• pp.43-49
• /
• 2009

Wear and rolling contact fatigue (RCF) defects are most important causes of rail damage, and often interaction competitive at present railway track. Head check is one of rolling contact fatigue (RCF) defects, and generally occurs in mild circular curves and transition curves that are set at both ends of sharp circular curves. Wear tends to limit the crack growth of head checks by removing the material from the RCF surface. In order to clarify the conditions of the occurrence and growth of head checks, the authors measured the interacting forces between wheels and rails and the angle of attack of wheelset, and carried out contact analyses using the actual profile data of wheels and rails. The effects of the lateral force, the contact geometry, and the wear rate at rail gauge comer on the formation of head checks were also analyzed by using the worn profiles of actual wheels and rails and the data obtained by a track inspection car. Some specific range of wear rate at the gauge comer was identified as having close relation with occurrence of head checks.

• 한국의사학회지
• /
• 제24권1호
• /
• pp.43-56
• /
• 2011

Everyone once in a life experience headaches as symptoms are very common. According to a study in a country of more than a week and as many as those who have experienced a headache amounts to 69.4%. In addition, the high reported prevalence of migraine in 30s for 80% of all migraine sufferers daily life interfere with work or was affected. In Western medicine, the cause of headaches is traction or deformation of pain induced tissue like scalp, subcutaneous tissue, muscle, fascia, extracranial arteriovenous, nerves, periosteum. But it turns out there are not cause why pain induced tissue is being tracted or deformated. Therefore, most of the western-therapy is mainly conducted with regimen for a temporary symptom reduction. Therefore, I examined how it has been developed in Chinese Ming Dynasty, the perception of headache, change in disease stage and an etiological cause. Oriental medicine in the treatment of headache is a more fundamental way to have an excellent treatment. The recognition of head in "素問($s{\grave{u}}$ $w{\grave{e}}n$)" and "靈樞($l{\acute{i}}ng$ $sh{\bar{u}}$)" began to appear in 'Soul-神($sh{\acute{e}}n$) dwelling place' and 'where to gather all the Yang-'諸陽之會($zh{\bar{u}}$ $y{\acute{a}}ng$ $zh{\bar{i}}$ $hu{\grave{i}}$)'. Also, head was recognized as '六腑($li{\grave{u}}f{\check{u}}$) 淸陽之氣($q{\bar{i}}ng$ $y{\acute{a}}ng$ $zh{\bar{i}}$ $q{\grave{i}}$) and 五臟($w{\check{u}}$ $z{\grave{a}}ng$) 精血($j{\bar{i}}ng$ $xu{\grave{e}}$) gathering place'. More specific structures such as the brain is considered a sea of marrow(髓海-$su{\check{i}}$ $h{\check{a}}i$) in "內經($n{\grave{e}}i$ $j{\bar{i}}ng$)" and came to recognized place where a stroke occurs. Accompanying development of the recognition about head, there had been changed about the perception of headache and the recognition of the cause and mechanism of headache. And the recognition of headache began to be completed in Ming Dynasty through Jin, Yuan Dynasty. Chinese Ming Dynasty, specially 樓英($l{\acute{o}}u$ $y{\bar{i}}ng$), in "醫學綱目($y{\bar{i}}xu{\acute{e}}$ $g{\bar{a}}ngm{\grave{u}}$)", first enumerated prescription in detail by separating postpartum headache. and proposed treatment of headache especially due to postpartum sepsis(敗血-$b{\grave{a}}i$ $xu{\grave{e}}$). 許浚($x{\check{u}}$ $j{\grave{u}}n$) accepted a variety of views without impartial opinion in explaining one kind of headache in "東醫寶鑑($d{\bar{o}}ng-y{\bar{i}}$ $b{\check{a}}oji{\grave{a}}n)$" 張景岳($zh{\bar{a}}ng$ $j{\check{i}}ng$ $yu{\grave{e}}$), in "景岳全書($j{\check{i}}ng$ $yu{\grave{e}}$ $qu{\acute{a}}nsh{\bar{u}}$)", established his own unique classification system-新舊表裏($x{\bar{i}}nji{\grave{u}}$ $bi{\check{a}}ol{\check{i}}$)-, and offered a clear way even in treatment. Acupuncture treatment of headache in the choice of meridian has been developed as a single acupuncture point. Using the classification of headache to come for future generation as a way of locating acupoints were developed. Chinese Ming Dynasty, there are special treatments like 導引按蹻法($d{\check{a}}o$ y ${\check{i}}n$ ${\grave{a}}n$ $ji{\check{a}}o$ $f{\check{a}}$), 搐鼻法($ch{\grave{u}}$ $b{\acute{i}}$ $f{\check{a}})$, 吐法($t{\check{u}}$ $f{\check{a}}$), 外貼法($w{\grave{a}}i$ $ti{\bar{e}}$ $f{\check{a}}$), 熨法($y{\grave{u}}n$ $f{\check{a}}$), 點眼法($di{\check{a}}n$ $y{\check{a}}n$ $f{\check{a}}$), 熏蒸法($x{\bar{u}}nzh{\bar{e}}ng$ $f{\check{a}}$), 香氣療法($xi{\bar{a}}ngq{\grave{i}}$ $li{\acute{a}}of{\check{a}}$). Most of this therapy in the treatment of headache, it is not used here, but if you use a good fit for today's environment can make a difference.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.637-642
• /
• 2011

Rails are subjected to damage from rolling contact fatigue, which leads to defects such as cracks. Rolling contact fatigue damages on the surface of rail such as head check, squats are one of growing problems. Another form of rail surface damage, known as "Ballast imprint" has become apparent. This form of damage is associated with ballast particles becoming trapped between the wheel and the surface of rail. These defects are still one of the key reasons for rail maintenance and replacement. In this study, we have investigated whether the ballast imprint is an initiator of head check type cracks and effect of defect size using Finite element analysis. The FE analysis were used to investigate stresses and strains in subsurface of defects according to variation of defect size. Based on loading cycles obtained from FE analysis, fatigue analysis for each point was carried out.

• Archives of Reconstructive Microsurgery
• /
• 제21권2호
• /
• pp.137-142
• /
• 2012

Purpose: To report the clinical and radiological result of the vascularized fibular epiphyseal transplantation in the treatment of humeral head deformity by septic arthritis Material & Methods: A 3 years old male who has humeral head deformity and bone defect by septic arthritis on neonatal period. We replaced bone defect as vascularized fibular epiphyseal transplantation and lengthened humerus shaft for humerus discrepancy. We followed it up for 14 years. Result: We saw the callus formation 2 months after surgery and obtained bone union, one year after surgery. The transplanted fibular bone got hypertrophy. We could check full range of motion on lt. shoulder and The bone deformity was not worsened and The graft did not displaced on last follow up. Conclusion: Humeral head reconstruction by vascularized fibular epiphyseal transplantation showed good clinical outcome.

• 대한안전경영과학회지
• /
• 제25권2호
• /
• pp.153-158
• /
• 2023

This research was conducted to reduce the defect rate caused by nozzle clogging of printing heads used in binder jet 3D printers. The binder jet 3D printing technology may adhere to the printing head nozzle by dispersing powder due to mechanical operation such as transferring the printing head and supplying powder, and may cause nozzle clogging by natural curing at the nozzle end depending on the type of binder used. To solve this problem, this study created a cleaning module exclusively for printing heads to check whether the durability of printing heads is improved through analysis of printing results before and after using the cleaning module. To this end, this research used a thermal bubble jet printing head, and the used powder was studied using gypsum powder.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.447-458
• /
• 2009

Energy loss at manholes, often exceeding friction loss of pipes under surcharged flow, is considered as one of the major causes of inundation in urban areas. Therefore, it is necessary to analyze head loss at manholes, especially in case of surcharged flow. Hydraulic experiments were conducted with three cases. Case A is to test whether the shapes of the manholes influence head loss coefficients. Case B and C were proposed to further reduce head losses by improving the manhole hydraulic efficiency. In case B, the joining part of the pipe at both shapes of manholes is shifted from central part to side part. The test in case C is to check the average head loss coefficient by installing the side benching in square manhole, based on shifted joining part model. The average head loss coefficient for circular and square manhole on case A was 1.6. This did not show much difference of the head loss coefficients in spite of the discharge variation in this case. However, case B and C show large difference between head loss coefficients due to the strong oscillation of water surface and the horizontal swirl motion. The circular and square manholes in case B reduced the head loss by 30% and 6% than ones in case A, respectively. The average head loss coefficient for circular manhole in case B was 1.1. Case C reduced average loss coefficients of the square manhole in case A from 1.6 to 1.1. Accordingly, the circular manhole in case B and the square manhole in case C showed the effective way to reduce the head loss. These head loss coefficients could be available to apply to the urban sewer system with surcharged flow.

• Journal of Oral Medicine and Pain
• /
• 제20권2호
• /
• pp.489-496
• /
• 1995

The purpose of this study was to evaluate an effect of change on head posture initial occlusal contacts with measuring the distances between initial occlusal contacts and maximum intercuspal position at different head posture in TMDs patient. For this study, 24 patients from age 13 to 36 were selected, they were examined health history taken, patients who have sign and symptoms of TMDs were examine before the study. For the normal group, 21 adults from age 23 to 25 were selected. They have normal or class I molar relationship, and have no other prosthetic restorations. Difference on distance between initial occlusal contact and maximum intercuspal position with mandibular kinesiograph$(MKG^R)$(K6 diagnostic system, Myo-tronic Inc, USA) in upright, supine, 45$^{\circ}$ extension, 30$^{\circ}$ flexion position of the head were measured. The Frankfort horizontal plane was used as a reference plane. The results were as follows : 1. There were significant differences between initial occlusal contacts of the normal and patient group on upright position and 30$^{\circ}$ flexion of the head(p<0.05, p<0.01) 2. The position of the initial occlusal contacts have a tendency to place anterior and inferior to maximal intercuspal position in upright position and 30( flexion of the head as well as posterior and inferior in supine position and 45$^{\circ}$ extension of the head in the normal and patient groups. 3. There were significant differences among the initial occlusal contacts between uptight and supine position; upright and 45$^{\circ}$ extension of the head(p<0.05); supine position and 30$^{\circ}$ flexion of the head, .and 30(flexion and 45$^{\circ}$ extension of the head in the patient group(p<0.01) The result have shown that after treatment on the supine position, it may be necessary to check occlusal contact on the upright position as well ass flexion of the head. It may need careful adjustment in occlusal condition on upright position of TMDs patient.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.1055-1056
• /
• 2010

• Journal of Oral Medicine and Pain
• /
• 제20권1호
• /
• pp.195-204
• /
• 1995

The purpose of this study was to evaluate effect of head posture change on initial occlusal contacts through measuring the distances between initial occlusal contacts and maximum intercuspal position at different head posture. Two special devices were designed and constructed. Mandibular movement replicator was used to assess reliability of the K6 diagnostic system(MKG; Myo-tronic Inc, Seatle, USA) and head posture calibrator was used to maintain the constant head posture during experiment. We measured difference of distance between initial occlusal contact and maximum intercuspal position with MKG in upright, supine, 45 degrees extension, 30 degrees flexion, 30 degrees right and left bending postion of the head. The Frankfurt horizontal plane was used as a reference plane. 21 adults aged from 23 to 25 were selected, who have normal or class I molar relationship, and have no symptoms on TMJ and masticatory muscles, and have restorations less than 3 surfaces on each tooth, and have no other prosthetic restoration. The obtained results were as follows : The mean absolute distances between initial occlusal contact and maximum intercuspal postion were 0.39(0.18mm in the upright position, 0.65(0.37mm in the supine position, 0.59(0.33mm in the 45 degree extension, 0.70(0.53mm in the 30 degrees flexion, 1.12(1.10mm in the 30 degrees right bending and 1.94(0.67mm in the 30 degrees left bending of the head. The positions of the initial occlusal contacts have a tendency to locate anterior, left and inferior to maximal intercuspal position in upright position, posterior and inferior in supine position and 45 degrees extension, anterior and inferior in 30 degrees flexion, right and inferior in 30 degrees right bending, and left and inferior in 30 degrees left bending of the head. There were significant differences among the initial occlusal contacts in each head postures(P<0.0001). Therefore, we need to check initial occlusal contacts in the altered head posture during occlusal analysis and adjustment of occlusal appliance and dental occlusion for diagnosis and treatment of temporomandibular disorder.