• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.413-423
• /
• 1998

Dental ceramics exhibit excellent esthetic property, compressive strength, chemical durability, biocompatibility and translucency. This study evaluated the shear bond strength of composite resin to the new heat-pressed ceramic material (IPS-Empress System) depending on the surface treatments and bonding agents. The surface treatments were etching with 4.0% hydrofluoric acid, application of silane, and the combination of the two methods. Composite resin was bonded to ceramic with four kinds of dentin bonding agents(All-Bond 2, Heliobond, Scotch bond Multi-purpose and Tenure bonding agents). The ceramic specimen bonded with composite resin was mounted in the testing jig, and the universal testing machine(Zwick 020, Germany) was used to measure the shear bond strength with the cross head speed of 0.5 mm/min. The results obtained were as follows 1. The mean shear bond strength of the specimens of which the ceramic surface was treated with the combination of hydrofluoric acid and silane before bonding composite resin was significantly higher than those of the other surface treatment groups(p<0.05). 2. In the case of All-Bond 2 and Scotchbond Multi-purpose bonding agent group, the surface treatment methods did not influenced significantly on the shear bond(p>0.05). 3. Of the four bonding agents tested, the shear bond strength of Heliobond was significantly lower than those of other bonding agents regardless of the surface treatment methods(p<0.05). 4. The highest shear bond strength($12.55{\pm}1.92$ MPa) was obtained with Scotchbond Multipurpose preceded by the ceramic surface treatment with the combination of 4% hydrofluoric acid and silane.

• Wind and Structures
• /
• 제27권5호
• /
• pp.347-356
• /
• 2018

In this paper, stress distribution for a structurally stable greenhouse is considered in the present paper with subsequent investigation into the detailed stress distribution contour with the variation of self-weight and wind pressure level designation method under wind velocity of less than 30 m/sec. For reliable analysis, wind pressure coefficients of a single greenhouse unit were modeled and compared with experiment with correlation coefficient greater than 0.99. Wind load level was designated twofold: direct mapping of fluid dynamic analysis and conversion of modeled results into wind pressure coefficients ($C_P$). Finally, design criteria of EN1991-1-4 and NEN3859 were applied in terms of their wind pressure coefficients for comparison. $C_P$ of CFD result was low in the most of the modeled area but was high only in the first roof wind facing and the last lee facing areas. Besides, structural analysis results were similar in terms of stress distribution as per EN and direct mapping while NEN revealed higher level of stress for the last roof area. The maximum stress levels are arranged in decreasing order of mapping, EN, and NEN, generating 8% error observed between the EN and mapping results under 30 m/sec of wind velocity. On the other hand, effect of dead weight on the stress distribution was investigated via variation of high stress position with wind velocity, confirming shift of such position from the center to the forward head wind direction. The sensitivity of stress for wind velocity was less than 0.8% and negligible at wind velocity greater than 20 m/sec, thus eliminating self-weight effect.

• 대한치과재료학회지
• /
• 제44권1호
• /
• pp.69-77
• /
• 2017

The aim of this study was to investigate the effects of chitosan powder addition on the strengthening of conventional glass ionomer cement. Two types of chitosan powders with different molecular weight were mixed with conventional glass ionomer cement (GIC): low-molecular weight chitosan (CL; 50~190 kDa), high-molecular weight chitosan (CH; 310~375 kDa). The chitosan powders (CL and CH) were separately added into the GIC liquid (0.25-0.5 wt%) under magnetic stirring, or mixed with the GIC powder by ball-milling for 24 h using zirconia balls. The mixing ratio of prepared cement was 2:1 for powder to liquid. Net setting time of cements was measured by ISO 9917-1. The specimens for the compressive strength (CS; $4{\times}6mm$), diametral tensile strength (DTS; $6{\times}4mm$), three-point flexure (FS; $2{\times}2{\times}25mm$) with flexure modulus (FM) were obtained from cements at 1, 7, and 14 days after storing in distilled water at $(37{\pm}1)^{\circ}C$. All mechanical strength tests were conducted with a cross-head speed of 1 mm/min. Data were statistically analyzed by one-way ANOVA and Tukey HSD post-hoc test. The mechanical properties of conventional glass ionomer cement was significantly enhanced by addition of 0.5 wt% CL to cement liquid (CS, DTS), or by addition of 10 wt% CH (FS) to cement powder. The CL particles incorporated into the set cement were firmly bonded to the GIC matrix (SEM). Within the limitation of this study, the results indicated that chitosan powders can be successfully added to enhance the mechanical properties of conventional GIC.

• 대한치과재료학회지
• /
• 제43권1호
• /
• pp.43-50
• /
• 2016

The aim of this study was to investigate the effect of multiwall carbon nanotube functionalized with carboxyl group (MWCNT-COOH) on the mechanical properties of dental glassionomer cement (GIC). MWCNT-COOH was prepared by the acid oxidative method. The MWCNT-COOH was incorporated into a commercial GIC powder or liquid at 0.5 wt% or 1.0 wt%. The net setting time of the cements was measured in accordance with ISO 9917 (Dental water-based cement). Specimens for compressive strength ($4mm{\varphi}{\times}6mm$), diametral tensile strength ($6mm{\varphi}{\times}4mm$) and flexure strength with modulus ($2mm{\times}2mm{\times}25mm$) were prepared by mixing with the cement liquid and kept in water bath of $(37{\pm}1)^{\circ}C$. Mechanical tests were conducted in 1 d, 7 d, and 14 days at a cross-head speed of 1 mm/min. Compressive strength of GIC mixed with 0.5 wt% MWCNT-COOH increased significantly at 7 d. However, overall mechanical properties of GIC modified with MWCNT were not significantly increased with a delayed setting time, in comparison with control cement. Overall results indicated that the MWCNT/GIC composite cements showed a limited strengthening effect for dental glassionomer cement.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.530-533
• /
• 2009

본 연구는 DSP(Digital signal processor)상에서 영상 처리 기술을 이용한 안전모 미착용 인식 기술을 개발한다. 이는 산업 현장에 배치된 영상 입력 장치를 통해 입력된 영상을 영상 처리하고, 안전모를 미착용한 사람이 발견될 경우 감독관에게 해당 인식 결과를 전송하여 조치를 취함으로써 만약의 사고 발생시 안전모를 착용하지 아니하여 발생할 수 있는 추가적인 인명피해를 미연에 방지한다. 안전모 미착용을 인식하기 위해서는 입력된 영상에서의 오브젝트 추출, 노이즈 제거, 사람/사물 판단, 머리 영역 추출, HSV 색공간을 이용한 안전모 착용 유/무 판단 등의 과정을 거친다. 영상입력 및 영상처리는 DSP를 이용해 처리하고 알고리즘의 속도 개선을 위하여 C언어 기반의 코드를 DSP가 제공하는 고유 함수(Intrinsics)들을 이용하여 최적화 한다.

• 한국컴퓨터정보학회논문지
• /
• 제17권2호
• /
• pp.31-40
• /
• 2012

홍채 인식은 홍채 패턴 정보를 이용하여 사람의 신원을 확인하는 생체 인식 기술이다. 이러한 홍채 인식 시스템에 있어 조명의 영향이나 동공의 크기, 머리의 기울어짐 등으로 인해 발생될 수 있는 홍채 패턴의 변화에 대해 무관한 특징을 추출하는 것은 중요한 과제이다. 본 논문에서는 Zernike Moment를 이용해 홍채의 회전에 강인한 홍채 인식 방법을 제안하였다. 빠르고 효과적인 인식을 위한 Zernike Moment를 선택하기 위해 전역 최적 차수를 이용하였고, 각각의 홍채 클래스와 매칭하기 위하여 국소 최적 차수를 사용 하였다. 제안된 방법은 특징 추출 및 특징 비교 시 회전에 대해 별도의 처리가 필요하지 않아 고속의 특징 추출 및 특징 비교가 가능하며 성능도 기존의 방법과 대등함을 실험을 통하여 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제17권2호
• /
• pp.167-176
• /
• 2012

본 논문은 장비엔지니어링 시스템(EES) 프레임워크에서 반도체와 광전자 제조장비를 위한 새로운 하이브리드 생산설비데이터 습득 시스템을 설계하고 구현한다. 장비엔지니어링 분야에서 장비로부터 수집되는 데이터 량이 급격히 증가하고 있다. 제안된 HEDAS(Hybrid Equipment Data Acquisition System)는 EES 프레임워크에서 발생하는 대용량의 실시간 데이터를 효율적으로 처리한다. 또한, 제안된 시스템은 실시간 EES 응용 뿐만 아니라 비실시간 EES 응용을 지원할 수 있다. 실시간 EES 응용을 위해서 HEDAS는 메모리 기반의 연속질의와 필터링 기술을 이용하여 고속의 실시간 처리를 수행한다. HEADS는 비 실시간 장비 데이터를 HEADS 기반의 데이터베이스 또는 기존의 데이터베이스에 선택적으로 저장할 수 있다. 특히, 급격하게 증가하는 장비 데이터에 대해 디스크 저장 비용을 절감하기 위해 타임스템프 기반의 압축 인덱싱과 질의처리 기법을 제공한다. HEDAS는 EES 프레임워크에서 대용량의 실시간 및 비 실시간 장비 데이터를 수집하여 다양한 EES 응용에 수집된 데이터를 전송할 수 있는 효율적인 시스템이다.

• 대한한방내과학회지
• /
• 제42권3호
• /
• pp.323-339
• /
• 2021

Objectives: This study investigates the effect of electro-acupuncture on aphasia after stroke. Methods: A search of OASIS, NDSL, PubMed, Cochrane, and CNKI was executed between 4 January 2021 and 4 February 2021, with no limitation on publication year. Extraction and selection from the studies were made by 3 authors. The quality of the studies was evaluated using Cochrane's risk of bias (RoB) tool. Results: 10 studies met the selection criteria. As the treatment site for electro-acupuncture, GV20 (Baihui) was used the most. In all studies, the region located on the head was used for treatment without distinguishing between acupoints and areas of scalp acupuncture, and the stimulation was organized into 3 conditions: speed, intensity, and time. The outcome indicators used before and after treatment focused on the evaluation of language function and the degree of aphasia. The results showed that using electro-acupuncture with speech rehabilitation therapy for aphasia after stroke was more effective than using speech rehabilitation therapy alone. Conclusions: In this review, electro-acupuncture for aphasia after stroke was found to have a significant effect compared to the previous treatment alone. However, because of limitations, information was not reliable enough. Additional research is needed to produce more objective evidence.

• 한국운동역학회지
• /
• 제31권1호
• /
• pp.16-23
• /
• 2021

Objective: The purpose of the study was to compare the acceleration and shock attenuation (SA) of the runners with/without low back pain (LBG vs. NLBG) while running at 2.5 m/s, 3.0 m/s, 3.5 m/s and 4.0 m/s. Method: 15 adults without low back pain (age: 23.13±3.46 years, body weight: 70.13±8.94 kg, height: 176.79±3.68 cm, NLBG) and 7 adults with low back pain (age: 27.14±5.81 years, body weight: 73.10±10.74 kg, height: 176.41±3.13 cm, LBG) participated in this study. LBG was recruited through the VAS pain rating scale. All participants ran on an instrumented treadmill (Bertec, USA). Results: The LBG shows statistically greater vertical acceleration at the distal tibia during running at 3.5 m/s and 4.0 m/s and greater shock attenuation from the distal tibia to the head during running at 3.5 m/s compared with the NLBG during running (p<.05). As the speed increased, there was a statistically significant increase in vertical/resultant acceleration and shock attenuation for both groups. Conclusion: The findings indicated that the runners with low back pain (LBG) experience greater impact and shock attenuation compared with non-low back pain group (NLBG) during fast running. However, it is still inconclusive whether high impact on the lower extremity during running is the main cause of low back pain in the population. Thus, it is suggested that the study on low back pain should observe the characteristics of impact during running with individuals' low back pain experience and clinical symptoms.

• 한국분무공학회지
• /
• 제25권4호
• /
• pp.162-169
• /
• 2020

The worldwide focus on reducing the emissions, fuel and lubricant consumption in T-GDI engines is leading engineers to consider the crankcase ventilation and oil mist separation system as an important means of control. In today's passenger cars, the oil mist separation systems mainly use the inertia effect (e.g. labyrinth, cyclone etc.). Therefore, this study has investigated high efficiency cylinder head-integrated oil-mist separator by using a compact multi-impactor type oil mist separator system to ensure adequate oil mist separation performance. For this purpose, engine dynamometer testing with oil particle efficiency measurement equipment and 3D two-phase flow simulation have been performed for various engine operating conditions. Tests with an actual engine on a dynamometer showed oil aerosol particle size distributions varied depending on operating conditions. For instance, high rpm and load increases bot only blow-by gases but the amount of small size oil droplets. Submicron-sized particles (less than 0.5 ㎛) were also observed. It is also found that the impactor type separator is able to separate nearly no droplets of diameter lower than 3 ㎛. CFD results showed that the complex aerodynamics processes that lead to strong impingement and break-up can strip out large droplets and generate more small size droplets.