• Korean Journal of Head & Neck Oncology
• /
• v.14 no.2
• /
• pp.228-235
• /
• 1998

Objectives: Papillary microcarcinoma of the thyroid was evaluated as to the effectiveness of diagnostic modalities, lymphatic spread pattern, and therapeutic decision according to tumor size. Material and Methods: We retrospectively analyzed a clinicopathologic findings of 72 papillary microcarcinoma patients who were treated at the over 11 years between 1985 and 1995. The authors divided papillary microcarcinoma of the thyroid into two subgroups according to tumor size: $0{\leqq}5mm$ and $5<0{\leqq}10mm$. An analysis including age and gender distribution, diagnostic tools(thyroid sonogram, thyroid scan, thyroid function test, fine needle aspiration cytology, frozen section), pathological examination of lymphnode, and surgical procedures was carried out in each subgroups. Results: The carcinoma of smaller than 5mm were found in 32 patients, and of 6 -10mm were in 40 patients. The average age of patients was 45years and all of them were female. Cold nodules on thyroid scan were noticed in 53 patientss and normal findings were in 15 patients. Suspicious malignant lesions(fine calcification, solid mass, irregular margin) on thyroid sonography were detected in 23 patients and the sonography was more useful in detecting $0{\leqq}5mm$ small sized lesions than other diagnostic methods. FNAC were performed in 17 patients, and 7 patients were diagnosed as having thyroid papillary cancer. But diagnotic rate in $0{\leqq}5mm$ small sized lesions was very low(one of eights).Frozen section were performed in all patients, among these 15 patients were diagnosed as being benign diseases and false negative rates were higher in $0{\leqq}5mm$ small sized lesions than in $5<0{\leqq}10mm$ sized lesions(p-value<0.006). Only thyroidectomies were performed in 24 patients and thyroidectomy with node dissections in 48 patients. The lymphnode metastatic rates were much higher in multifocal lesions(61.5%) than in single lesion. The incidence of cervical lymphnode metastasis was 19.4% in $0{\leqq}5mm$ sized lesions and 47.9% in $5<0{\leqq}10mm$ sized lesions. Postoperative management were performed with TSH suppression therapy(T4, synthroid) in all patients and RI therapy in 29 patients. Conclusion: On the basis of our study, improved preoperative diagnostic tools for papillary microcarcinoma of the thyroid was helpful in the choice of surgical treatment. As a result of techninological progress(ultrasonography, FNAC), the pencentage of the discovery of papillary microcarcinoma has been increased. The thyroid ultrasonography was useful in detecting small sized lesions($0{\leqq}5mm$), but FNAC may not be beneficial in detecting small sized lesions($0{\leqq}5mm$). In the surgical procedure, thyroid lobectomy alone should be avoided because of the high rate of bilaterality and multifocality.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.87-94
• /
• 2002

Recently, there have been numerous attempts to expand the traditional temporary soil nailing system into a permanent wall. Two reasons for this include the soil nailed system's advantage of efficient and economic use of subgrade space and its ability to decrease the total construction cost. However, the systematic and logical design approach has not been proposed yet. The permanent soil nailing wall system, which utilizes precast concrete from soil nailing system, is already used in many countries, but the study of cast-in-place concrete lacing or rigid walls in bottom-up construction of traditional soil nailing walls is imperfect and insufficient. In this paper, various laboratory model tests have been carried out to investigate the influence of parameters, including stiffness of the rigid wall to the soil nailing structure with respect to failure mode, displacement patterns and tensile forces at the nail head in several levels of load. Then, the variation of earth pressure distribution on the soil nailing wall, built with a rigid front plate, is sought through different levels of surcharge load and tensile forces at the nail head.

• Applied Microscopy
• /
• v.35 no.2
• /
• pp.97-104
• /
• 2005

Plant epidermis consists of relatively unspecialized cells and more specialized cells of various structure and function. Trichomes are specialized cells originated from the epidermis and much attention has been paid to the plants developing trichomes with peculiar structure and function. The present study has been undertaken to examine the trichome type noticed in the leaf epidermis of Althaea rosea using scanning electron microscopy. Four types, namely simple, short-and long-tufted, and glandular hairs, were detected in their epidermis. Their Distribution, frequency and structure varied by the development and epidermal surface. The most frequently distinguished type was the tufted ones growing in young leaves of the abaxial epidermis, while the simple hairs were rare throught the examination. The short-tufted hairs branched up to seven times having each branchlet about $160{\sim}210{\mu}m$ in length at maturity. The long-tufted hairs exhibited up to ten branchlets, where branchlets could reach up to $900{\sim}1,000{\mu}m$ long when fully expanded. Glandular trichome was the peltate type comprising $1{\sim}2$ secretory head cells, 2 stalk cells and a basal cell. The short peltate glandular hairs, usually not exceeding $40{\mu}m$, differentiated more along the areoles in the adaxial epidermis. The function of these trichomes in A. rosea has been still obscure, but it has been speculated that they probably play a role in protection; non-glandular ones possibly providing a defense against insects and secretory glandular type participating in chemical defense. Structural features of these trichomes at cellular level will be discussed in the following study of transmission electron microscopy.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.3
• /
• pp.70-78
• /
• 2000

In this study, a new method for canceling MRI artifacts through the motion translation of image plane is presented Breathing often makes problems in a clinical diagnosis. Assuming that the head moves up and down due to breathing, rigid translational motions in only y(phase encoding axis) direction are treated Unlike the conventional Iterative phase retrieval algorithm, this method is based on the MRI imaging process and analyzing of Image property A new constraint condition with which the motion component and the true image component in the MRI signal can be separated by a simple algebraic operation is extracted After the x(read out) directional Fourier transformation of MRI signal is done, the y(phase encoding) directional spectrum phasing value is Just an algebraic sum of the Image component and the motion component Meanwhile, as It is known that the density of subcutaneous fat area is almost uniform in the head tomographs, the density distribution along a y directional line on this fat area is regarded as symmetric shape If the density function is symmetric, then the phase of spectrum changes linearly with the position Hence, the departure component from the linear function can be separated as the motion component Based on this constrant condition, the new method of artifact cancellation is presented Finally, the effectiveness of this algorithm IS shown by using a phantom with simulated motions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.287-292
• /
• 2012

In this study, Multi-Channel Magnetic Flux Leakage(MFL) sensor - based inspection system was applied to monitor the condition of cables. This inspection system measures magnetic flux to detect the local faults(LF) of steel cable. To verify the feasibility of the proposed damage detection technique, an 8-channel MFL sensor head prototype was designed and fabricated. A steel cable bunch specimen with several types of damage was fabricated and scanned by the MFL sensor head to measure the magnetic flux density of the specimen. To interpret the condition of the steel cable, magnetic flux signals were used to determine the locations of the flaws and the level of damage. Measured signals from the damaged specimen were compared with thresholds set for objective decision making. In addition, the magnetic flux density values measured from every channel were summed to focus on the detection of axial location. And, sum of flux density were displayed with threshold. Finally, the results were compared with information on actual inflicted damages to confirm the accuracy and effectiveness of the proposed cable monitoring method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.387-396
• /
• 2010

A 3-D numeric model for the confined transient flow under sea ground have been developed. This is FDM model using Gauss-Seidel SOR (successive over-relaxation). This model shows the similar head distribution pattern to Theis analytic solution and MODFLOW simulation. The input flowrate to the aquifer and discharge of well have been compared. And it have been found that mass balance is influenced by the weight factor ${\alpha}$, i.e. fullyimplicit method (${\alpha}$=1) shows 5% error, but when ${\alpha}$ becomes to 0.5(Crank and Nicolson method) the mass balance becomes worse and the model result diverges. And the convergency of the model is not much different when $\lambda$ (over-relaxation factor)=0.8~1.5, but when $\lambda$>1.5, the model result diverges. The test-run shows that the well discharge becomes smaller when another well is near. This model can cover the isotropy$(Kx{\neq}Ky{\neq}Kz)$ and inhomogeneity, and can be used for the selection of well site, discharge calculation, and head prediction in case of the artificial recharge etc.

• Journal of Radiation Protection and Research
• /
• v.48 no.4
• /
• pp.197-203
• /
• 2023

Background: The thermoluminescent dosimeter (TLD) and Monte Carlo (MC) dosimetry are carried out to determine the occupational dose for personnel in the handling of ¹²⁵I seed sources. Materials and Methods: TLDs were placed in different layers of the Alderson-Rando phantom in the thyroid, lung and also eyes and skin surface. An ¹²⁵I seed source was prepared and its activity was measured using a dose calibrator and was placed at two distances of 20 and 50 cm from the Alderson-Rando phantom. In addition, the Monte Carlo N-Particle Extended (MCNPX 2.6.0) code and a computational phantom with a lattice-based geometry were used for organ dose calculations. Results and Discussion: The comparison of TLD and MC results in the thyroid and lung is consistent. Although the relative difference of MC dosimetry to TLD for the eyes was between 4% and 13% and for the skin between 19% and 23%, because of the existence of a higher uncertainty regarding TLD positioning in the eye and skin, these inaccuracies can also be acceptable. The isodose distribution was calculated in the cross-section of the head phantom when the ¹²⁵I seed was at two distances of 20 and 50 cm and it showed that the greatest dose reduction was observed for the eyes, skin, thyroid, and lungs, respectively. The results of MC dosimetry indicated that for near the head positions (distance of 20 cm) the absorbed dose rates for the eye lens, eye and skin were 78.1±2.3, 59.0±1.8, and 10.7±0.7 µGy/mCi/hr, respectively. Furthermore, we found that a 30 cm displacement for the ¹²⁵I seed reduced the eye and skin doses by at least 3- and 2-fold, respectively. Conclusion: Using a computational phantom to monitor the dose to the sensitive organs (eye and skin) for personnel involved in the handling of ¹²⁵I seed sources can be an accurate and inexpensive method.

• The Journal of Korean Society for Radiation Therapy
• /
• v.34
• /
• pp.21-30
• /
• 2022

Purpose: The purpose of this study is to evaluate the effectiveness of oral positioning stent, the BinkieRT^TM in radiation treatment for head and neck cancer patients in terms of tongue positions reproducibility, tongue doses and material properties. Materials and Methods: 24 cases using BinkieRT^TM during radiation treatments were enrolled. The tongue was contoured on planning CT and CBCT images taken every 3 days during treatment, and then the DSC and center of tongue shift values were analyzed to evaluate the reproducibility of the tongue. The tongue dose was compared in terms of dose distribution when using BinkieRT^TM and different type of oral stents (mouthpiece, paraffin wax). Randomly selected respective 10 patients were measured tongue doses of initial treatment plan for nasal cavity and unilateral parotid cancer. Finally, In terms of material evaluation, HU and relative electron density were identified in RTPS. Results: As a result of DSC analysis, it was 0.8 ± 0.07, skewness -0.8, kurtosis 0.61, and 95% CI was 0.79~0.82. To analyze the deviation of the central tongue shift during the treatment period, a 95% confidence interval for shift in the LR, SI, and AP directions were indicated, and a one-sample t-test for 0, which is an ideal value in the deviation(n=144). As a result of the t-test, the mean and SD in the LR and SI directions were 0.01 ± 0.14 cm (p→.05), 0.03 ± 0.25 cm (p→.05), and -0.08 ± 0.25 cm (p ←.05) in the AP direction. In the case of unilateral parotid cancer patients, the Dmean to the tongue of patients using BinkieRT^TM was 16.92% ± 3.58% compared to the prescribed dose, and 23.99% ± 10.86% of patients with Paraffin Wax, indicating that the tongue dose was relatively lower when using BinkieRT^TM (p←.05). On the other hand, among nasal cavity cancer patients, the Dmean of tongue dose for patients who used BinkieRT^TM was 4.4% ± 5.6%, and for those who used mouthpiece, 5.9% ± 6.8%, but it was not statistically significant (p→.05). The relative electron density of Paraffin Wax, BinkieRT^TM and Putty is 0.94, 0.99, 1.26 and the mass density is 0.95, 0.99 and 1.32 (g/cc), Transmission Factor is 0.99, 0.98, 0.96 respectively. Conclusion: The result of the tongue DSC analysis over the treatment period was about 0.8 and Deviation of the center of tongue shifts were within 0.2 cm, the reproducibility was more likely excellent. In the case of unilateral head and neck cancer patients, it was found that the use of BinkieRT^TM rather than Paraffin Wax or Putty can reduce the unnecessary dose irradiated to the tongue. This study might be useful to understand of BinkieRT^TM's properties and advantages. And also it could be another considered option as oral stent to keep the reproducibility of tongue and reducing dose during head and neck radiation treatments.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.208-214
• /
• 2015

The aim of this study is to investigate the effect of low magnetic field on dose distribution in the partial-breast irradiation (PBI). Eleven patients with an invasive early-stage breast carcinoma were treated prospectively with PBI using 38.5 Gy delivered in 10 fractions using the $ViewRay^{(R)}$ system. For each of the treatment plans, dose distribution was calculated with magnetic field and without magnetic field, and the difference between dose and volume for each organ were evaluated. For planning target volume (PTV), the analysis included the point minimum ($D_{min}$), maximum, mean dose ($D_{mean}$) and volume receiving at least 90% ($V_{90%}$), 95% ($V_{95%}$) and 107% ($V_{107%}$) of the prescribed dose, respectively. For organs at risk (OARs), the ipsilateral lung was analyzed with $D_{mean}$ and the volume receiving 20 Gy ($V_{20\;Gy}$), and the contralateral lung was analyzed with only $D_{mean}$. The heart was analyzed with $D_{mean}$, $D_{max}$, and $V_{20\;Gy}$, and both inner and outer shells were analyzed with the point $D_{min}$, $D_{max}$ and $D_{mean}$, respectively. For PTV, the effect of low magnetic field on dose distribution showed a difference of up to 2% for volume change and 4 Gy for dose. In OARs analysis, the significant effect of the magnetic field was not observed. Despite small deviation values, the average difference of mean dose values showed significant difference (p<0.001), but there was no difference of point minimum dose values in both sehll structures. The largest deviation for the average difference of $D_{max}$ in the outer shell structure was $5.0{\pm}10.5Gy$ (p=0.148). The effect of low magnetic field of 0.35 T on dose deposition by a Co-60 beam was not significantly observed within the body for PBI IMRT plans. The dose deposition was only appreciable outside the body, where a dose build-up due to contaminated electrons generated in the treatment head and scattered electrons formed near the body surface.

• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.178-187
• /
• 2006

The present study was performed to evaluate the stress distribution on the diameter of the mini-implant and insertion angle to the bone surface. To perform three dimensional finite element analysis, a hexadron of $15{\times}15{\times}20mm^3$ was used, with a 1.0 mm width of cortical bone. Mini-implants of 8 mm length and 1.2 mm, 1.6 mm, and 2.0 mm in diameter were inserted at $90^{\circ},\;75^{\circ},\;60^{\circ},\;45^{\circ},\;and\;30^{\circ}$ to the bone surface. Two hundred grams of horizontal force was applied to the center of the mini-implant head and stress distribution and its magnitude were analyzed by ANSYS, a three dimensional finite element analysis program. The findings of this study showed that maximum von Mises stresses in the mini-implant and cortical and cancellous bone were decreased as the diameter increased from 1.2 mm to 2.0 mm with no relation to the insertion angle. Analysis of the stress distribution in the cortical and cancellous bone showed that the stress was absorbed mostly in the cortical bone, and little was transmitted to the cancellous bone. The contact area increased according to the increased diameter and decreased insertion angle to the bone surface, but maximum von Mises stress in cortical bone was more significantly related with the contact point of the mini-implant into the cortical bone surface than the insertion angle to the bone surface. The above results suggest that the maintenance of the mini-implant is more closely related with the diameter and contact point of the mini-implant into the cortical bone surface rather than the insertion angle.