• Radiation Oncology Journal
• /
• v.5 no.2
• /
• pp.149-155
• /
• 1987

The success of radioation therapy depends on exact treatment of the tumor with significant high dose for maximizing local control and excluding the normal tissues for minimizing unwanted complications. To achieve these goals, correct estimation of target volume in three dimension, exact dose distribution in tumor and normal critical structures and correction of tissue inhomogeneity are required. The effect of therapy oriented CT (plannng CT) were compared with conventional simulation method in necessity of planning change, set dose, and proper distribution of tumor dose. Of 365 new patients examined, planning CT was performed in 104 patients $(28\%)$. Treatment planning was changed in $47\%$ of head and neck tumor, $79\%$ of intrathoracic tumor and $63\%$ of abdmonial tumor. in breast cancer and musculoskeletal tumors, planning CT was recommended for selection of adequate energy and calculation of exact dose to critical structures such as kidney or spinal cord. The average difference of tumor doses between CT planning and conventional simulation was $10\%$ in intrathoracic and intra-abdominal tumors but $20\%$ in head and neck tumors which suggested that tumor dose may be overestimated in conventional simulation Although some limitations and disadvantages including the cost and irradiation during CT are still criticizing, our study showed that CT Planning is very helpful in radiotherapy Planning.

• Korean Journal of Head & Neck Oncology
• /
• v.28 no.1
• /
• pp.3-7
• /
• 2012

Background and Objectives : Nasopharyngeal carcinoma(NPC) shows a distinct geographic and demographic distribution with high incidences in Chinese and Southeast Asians. Current WHO classification divides NPC into nonkeratinizing carcinoma(NKC)(differentiated and undifferentiated subtypes), keratinizing squamous cell carcinoma(KSCC), and basaloid squamous cell carcinoma(BSCC). Relative frequency of histologic subtypes of NPC is known to vary according to the incidence of NPC. Korea is one of the low-incidence countries according to the GLOBOCAN 2008 database by IARC. The aim of this study is to assess the histopathologic types and EBV status of NPC of Koreans. Materials and Methods : We reviewed and reclassified 168 cases of NPC(132 males and 36 females) diagnosed from January 1996 through July 2006. In situ hybridization for EBV-encoded early RNA(EBER) was performed on 146 cases and the results were compared among different histologic types, genders, and age and stage groups. Results : NKC, undifferentiated subtype(NKC-U) was identified in 106 cases(63.1%) and differentiated subtype(NKC-D) in 49 cases(29.2%). Remaining 13 cases(7.7%) were classified as KSCC. NKC and NKC-U were more common in females than in males. EBV prevalence was higher in NKC than in KSCC(NKC-U, 90% ;, NKC-D, 84.1% ; KSCC, 7.7%) and more common in younger age(${\leq}40$) than older age(>40) group. Conclusion : Histologic type distribution and EBV prevalence of NPC in Korean patients corresponded to that of intermediate incidence area. Pathogenesis of nasopharyngeal KSCC is assumed to be different from that of NKC.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.166-173
• /
• 2017

Morphological and population characteristics of the Cottus koreanus were investigated at Hoam stream from October 2015 and April 2016. This is the first record on C. koreanus not only from Hoam stream (the upstream region of Daejong stream, Gyeongsangbuk-do Gyeongju-si Yangbuk-myeon Hoam-ri) but also from the stream flowing into the Samcheogosip stream, in the southern part of East Sea, Korea. The distribution of C. koreanus ranged from Girim temple to Yongyeon waterfall, about 1.2 km, and the water surface were about $3,600m^2$. The population size was assumed to 1,656 individual number, 46 object per $100m^2$. The morphometric characteristics of C. koreanus in the Hoam stream and the Han river are very similar except that the population at Hoam stream shorter head length, ventral fin ray length, pectoral fin ray length and mouth width when compared with the population at Han river. Other than that, the two populations showed the same meristic characters. Frequency analysis of total length indicated that the group with 40~59 mm in total length was one year old, the 60~79 mm was two years old, and the group over 80 mm was three years old. The average number of eggs in the ovaries was estimated as 361 (239~468) per matured female. The number of matured eggs size in ovaries was $2.6{\pm}0.21$ (23.~3.1) mm and this species was large eggs type. Calculation of the length-weight relation of C. koreanus showed the value of constant a as 0.00001 and b as 3.01, and the Condition factor (K) was 1.26 an on average.

• Journal of Radiation Protection and Research
• /
• v.36 no.3
• /
• pp.160-167
• /
• 2011

This study conducts cross-comparison through verification of treatment planning of using beam spoiler and bolus, according to the dose variation of different tumor bed and metastatic lymph node cancers, against ionization and optically stimulated luminescence detectors(OSLDs), in head and neck radiotherapy. Verification of treatment planning examined the feasibility of inserting detectors through simulated solid dry water slabs under identical irradiated conditions from treatment planning system to measure beam spoiler and 0.5, 1 cm bolus. In addition, two detectors were cross-compared for verification of treatment planning accuracy and reliability within ${\pm}$2%. The study found that, given a beam spoiler thickness of 0.5 cm and beam spoiler-to-skin distance of 10 cm subjected to optimal dose distribution given for metastatic lymph node cancers, the bolus low-level skin dose was less, and the tumor bed dose reduced slightly. Additionally, two detectors were cross-compared for accuracy within ${\pm}$1%. Accordingly, The use of beam spoiler was determined that reduces skin side effects and can deliver an optimal dose distribution for tumor, and to apply to future clinical studies should be performed.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.11-20
• /
• 2003

The purpose of the present study is to evaluate the stress distribution on the length and diameter of the miniscrew and cortical bone width. Three dimensional finite element models were made of diameter 1.2mm, 1.6mm, 2.0mm and length 6.0mm, 8.0mm, 10.0mm, 12.0mm and cortical bone width 1.0mm. Also, another three dimensional finite element models were made of diameter 1.2mm, 1.6mm, 2.0mm and length 8.0mm and cortical bone width 1.0mm, 1.5mm, 2.0mm, 2.5mm. Two-hundred grams horizontal force were applied on the center of the miniscrew head and at that stress distribution and its magnitude had been analyzed by ANSYS, which is three dimensional finite element analysis program. The obtained results were as follows : 1. The comparison of the maximum von-Mises stress in the miniscrew showed that as the diameter increases from 1.2mm to 2.0mm stress has been decreased, while on the same diameter stress was not changed regardless of the length change. 2. The comparison of the maximum von-Mises stress in the cortical and cancellous bone showed that as the diameter increases from 1.2mm to 2.0mm stress has been decreased, while on the same diameter stress was not changed regardless of the length change. 3. In the analysis of the stress distribution in the cortical and cancellous bone, the most of the stress had been absorbed in the cortical bone, and did not transmitted much to the cancellous bone. 4. In the analysis of the maximum von-Mises stress according to the cortical bone width, the same diameter of the miniscrew showed a constant stress value regardless of the cortical bone width change. The above results suggest that the maintenance of the miniscrew is more reliable on diameter than length of the miniscrew.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.71-79
• /
• 2008

High voltage distribution lines in the electric railway system placed according track with communication lines and signal equipments. Case of the over head lines is occurrence the many fault because lightning, rainstorm, damage from the sea wind and so on. According this fault caused protection device to wrong operation. One line ground fault that occurs most frequently in railway high voltage distribution lines and sort of faults is line short, three line ground breaking of a wire, and so on. For this reason we need precise maintenance for prevent of the faults. The most important is early detection and fast restoration in time of fault for a safety transit. In order to develop an advanced fault location device for 22.9[kV] distribution power network in electric railway system this paper deals with new fault locating algorithm using flow technique which enable to determine the location of the fault accurately. To demonstrate its superiorities, the case studies with the algorithm and the fault analysis using PSCAD/EMTDC (Power System Computer Aided Design/Electro Magnetic Transients DC Analysis Program) were carried out with the models of direct-grounded 22.9[kV] distribution network which is supposed to be the grounding method for electric railway system in Korea.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.4
• /
• pp.405-410
• /
• 2011

The purpose of this study was to compare the differences in kinematic variables and grip forces among professionals(PG), amateurs(AG), and novice group(NG) during golf putting. The participants consisted of 3 groups based on their playing ability: 8 professional golfers (handicap<5), 8 amateurs (handicap<18) and 8 novice. Each subject attempted 2.1m putts from the hole. 3D motion analysis system(Motion analysis Corp., USA) with 6 high speed cameras and grip force measurement system(Kim et al., 2007) were used to acquired kinematic and force data, respectively. To compare differences among groups, joint angles of upper limbs, trajectory and smoothness by jerk cost function(JC) of putter head and grip forces were used in this study. Results showed that there were significant differences among groups in most of variables such as joint angles, trajectory & smoothness of putter head, and distribution of grip force in both hands. In brief, we confirmed that putting stroke in PG was more accurate and smooth than that in other groups, especially NG, due to their well-controlled upper limbs and keeping grip forces constant in both hands. It can be concluded that due to skilled levels, fundamental differences of putting movement could be identified and these differences might be helpful for improving one's putting skills.

• The Journal of Engineering Geology
• /
• v.16 no.1 s.47
• /
• pp.15-21
• /
• 2006

Sandy soils obtained from the field were examined by the way of particle analyses. The hydraulic conductivity values of the disturbed soil samples were measured by the falling head method. Then the correlations between the hydraulic conductivity and particle distribution were defined. The soil which was a product of the weathering of the granitic rocks belonged to sand and loamy sand area in a sand-silt-clay triangular diagram. The measurements of hydraulic conductivity were $1.15X10^{-5}\sim7.31X10^{-4}cm/sec$ which is the range of sand and silt. It was clearly observed that the hydraulic conductivity measurements of the sandy soils showed stronger correlations with the particle variances rather than the mean grain sizes. The larger the variances, the smaller the hydraulic conductivity measurements. The sandy soil which was a product of weathered granite and whose mean grain size was $0.38\sim1.97mm$ showed regression curves of $y=6.0E-5x^{-1.4}$ in a correlations between hydraulic conductivity and particle variances. Accordingly, it is clearly concluded that making estimates with-out any consideration about particle variances can produce serious errors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.103-112
• /
• 1991

In this study, a numerical model was established and applied to simulate the steady-state groundwater and heat flow in an isotropic, heterogeneous, three dimensional aquifer system with uniform thermal properties and no change of state. This model was developed as an aid in screening large groundwater-flow systems as prospects for underground waste storage. Driving forces on the system are external hydrologic conditions of recharge from precipitation and fixed hydraulic head boundaries. Heat flux includes geothermal heat-flow, conduction to the land surface, advection from recharge, and advection to or from fixed-head boundaries. The model uses an iterative procedure that alternately solves the groundwater-flow and heat-flow equations, updating advective flux after solution of the groundwater-flow equation, and updating hydraulic conductivity after solution of the heat-flow equation. Dierect solution is used for each equation. Travel time is determined by particle tracking through the modeled space. Velocities within blocks are linear interpolations of velocities at block faces. Applying this model to the groundwater-flow system located in Jigyung-ri. Songla-myun, Youngil-gun. Kyungsangbuk-do, the groundwater-flow system including distribution of head, temperature and travel time and flow line, is analyzed.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.4
• /
• pp.370-376
• /
• 2011

Objective : Posttraumatic cerebral infarction (PTCI), an infarction in well-defined arterial distributions after head trauma, is a known complication in patients with severe head trauma. The primary aims of this study were to evaluate the clinical and radiographic characteristics of PTCI, and to assess the effect on outcome of decompressive hemicraniectomy (DHC) in patients with PTCI. Methods : We present a retrospective analysis of 20 patients with PTCI who were treated between January 2003 and August 2005. Twelve patients among them showed malignant PTCI, which is defined as PTCI including the territory of Middle Cerebral Artery (MCA). Medical records and radiologic imaging studies of patients were reviewed. Results : Infarction of posterior cerebral artery distribution was the most common site of PTCI. Fourteen patients underwent DHC an average of 16 hours after trauma. The overall mortality rate was 75%. Glasgow outcome scale (GOS) of survivors showed that one patient was remained in a persistent vegetative state, two patients were severely disabled and only two patients were moderately disabled at the time of discharge. Despite aggressive treatments, all patients with malignant PTCI had died. Malignant PTCI was the indicator of poor clinical outcome. Furthermore, Glasgow coma scale (GCS) at the admission was the most valuable prognostic factor. Significant correlation was observed between a GCS less than 5 on admission and high mortality (p<0.05). Conclusion : In patients who developed non-malignant PTCI and GCS higher than 5 after head injury, early DHC and duroplasty should be considered, before occurrence of irreversible ischemic brain damage. High mortality rate was observed in patients with malignant PTCI or PTCI with a GCS of 3-5 at the admission. A large prospective randomized controlled study will be required to justify for aggressive treatments including DHC and medical treatment in these patients.