• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.248-250
• /
• 2006

The study on a surface transformation hardening of a rod-shaped SM45C carbon steel is carried out by using CW Nd:YAG laser. Conventionally, $CO_2$ laser has been usually used as a laser source for a transformation hardening. however, it is needed to an additional absorbent coating like a colloidal graphite owing to a lower absorbtion rate. On the other hand, no cost and post-removal process of coating is required to Nd:YAG laser, due to a higher absorbtion rate relatively. Moreover, there is a merit which is capable of building up the more flexible processing system resulted from a beam delivery through a optical fiber. In this study, we were going to recognize characteristics of a transformation hardening using a optic head with a gaussian beam distribution.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.28-32
• /
• 1995

The presteamed or prefrozen persimmon blocks of 10cm ${\times}$ 10cm ${\times}$ 15cm were air-dried at room temperature until about 30% moisture content, and then were dried in a MW oven. During drying their internal temperatures were monitored with thermo-couple probes. The presteamed and prefrozen blocks didn't show any improvement in drying rate and moisture gradient when compared with the controls. Checks appeared on the surfaces of most presteamed blocks during air-drying. It has been clearly revealed that the maximum weight, loss must, be less than 2g/min during MW drying to prevent internal checking and that MW drying reduced moisture gradients inside blocks. MW dried the persimmon blocks 440 times faster than conventional kiln.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.2
• /
• pp.32-35
• /
• 2012

The objective of the present work is to develop a precise instrument for measuring the thermal property of insulating material over a temperature range from 30 K to near room temperature by utilizing a cryocooler. The instrument consists of two thermal links, a test sample, heat sink, heat source and vacuum vessel. The cold head of the cryocooler as a heat sink is thermally anchored to the thermal link and used to bring the apparatus to a desired temperature in a vacuum chamber. An electric heater as a heat source is placed in the middle of test sample for generating uniform heat flux. The entire apparatus is covered by thermal shields and wrapped in multi-layer insulation to minimize thermal radiation in a vacuum chamber. For a supplied heat flux the temperature distribution in the insulating material is measured in steady and transient state. The thermal conductivity of insulating material is measured from temperature difference for a given heat flux. In addition, the specific heat of insulating material is obtained by solving one-dimensional heat diffusion equation.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.412-413
• /
• 2008

가공배전선로는 야외에 시설되어 하계의 태풍 및 동계의 설해와 같은 자연재해에 상시 노출됨에 따라 지지물 절손 피해가 발생할 우려가 높다. 따라서 직선으로 시설되는 전주가 절손되지 않도록 설계지역의 기상조건을 감안하여 전주강도가 충분한지 여부를 검토하여야 한다. 그러나 현업에 종사하는 설계원들이 어떠한 방법으로 전주강도를 검토하는지에 대한 이해가 부족한 실정이다. 따라서 본 고에서는 전주강도 계산과 관련하여 연구된 이론을 설명하였고, 그 이론을 바탕으로 장경간개소와 표준경간에 설치되는 전주에 대한 설계방안을 연구한 결과를 사례를 통해서 설명하였다. 본 고에서 제시한 방법에 따라 설계를 시행한다면 직선으로 시공되는 전주들의 강도가 태풍 및 설해에 대비하여 충분히 확보됨에 따라 재해 시에도 이로 인한 전주 절손 피해가 예방될 수 있을 것으로 기대되며, 또한 전기고장 예방을 통한 고품질 전력확보에도 기여할 것으로 기대된다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2224-2225
• /
• 2008

가공배전선로는 야외에 시설됨에 따라 태풍과 같은 자연재해로 인한 전기고장 및 설비피해가 발생하기 쉽다. 그러나 이와 관련한 연구들이 이론적인 부분에만 치우쳐 장경간 가공배전선로의 설계 시 어떤 순서로 무엇을 검토해야하는지 알기가 어려웠다. 따라서 본 고에서는 장경간 가공배전선로 설계시 전선종류, 장주형태, 완철간 수직이격거리 및 지지물 길이를 결정하는 방법에 대하여 연구한 결과를 사례를 통해 설명하였다. 본 고에서 제시한 방법에 따라 설계를 시행한다면 장경간 가공배전선의 선간단락고장을 예방할 수 있을 뿐만 아니라, 홍수 시에도 수면으로부터 충분한 지상고 유지를 위하 고장 및 설비피해를 예방할 수 있을 것으로 기대된다.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.2
• /
• pp.37-55
• /
• 1989

When a ship is sailing on the sea, she has the six-degrees of freedom of motion. It means that she meets a lot of dangerous situations. Especially, when the VLCC is travelling in irregular sea, the slamming, the deck-wetness and the propeller racing are occured with the sea state she is on. These are the representative steps that a heave-to and a scudding are used for a ship building , but for a predominance in both. The author intends to clarify this problem theoretically. The methods of statistical calculation are based with the ITTC spectral formulation and with the assumption that the wave height histogram follows the Rayleigh distribution. In this study, the author gives an attention on the relative bow motion to a wave in the irregular sea. It is verified that the relative diplacement at the bow to sea level in the following sea is less than that in the head sea. It is confirmed that, therefore, one have to sail with scudding when he is threatened to heave-to at a rough sea. But he must bear the propeller racing in mind in the cases.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.246-249
• /
• 2009

Due to the additive white Gaussian noise (AWGN), images are often corrupted. In recent days, Bayesian estimation techniques to recover noisy images in the wavelet domain have been studied. The probability density function (PDF) of an image in wavelet domain can be described using highly-sharp head and long-tailed shapes. If a priori probability density function having the above properties would be applied well adaptively, better results could be obtained. There were some frequently proposed PDFs such as Gaussian, Laplace distributions, and so on. These functions model the wavelet coefficients satisfactorily and have its own of characteristics. In this paper, mixture distributions of Gaussian and Laplace distribution are proposed, which attempt to corporate these distributions' merits. Such mixture model will be used to remove the noise in images by adopting Maximum a Posteriori (MAP) estimation method. With respect to visual quality, numerical performance and computational complexity, the proposed technique gained better results.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.1
• /
• pp.35-42
• /
• 2007

This study is the research of occupation distribution about citizen members of autonomy organization in Cheongju area. Investigation of autonomy organization members acting as local readers makes it possible to understand direction for community promotion. Result of this study sums up two type occupational categories. First, in urban area independently managers is above participation ratio in public affairs appeared. On the other hand, ratio of private organization, employee, and experts are low. In rural area, it shows the participation ratio of functional representatives and farmers highly. Second, with investigation of detailed occupation, most independent contractors and such as architecture, real-estate, whole and retail sales, restaurant, nursery, and private educational institute. And small number of insurance, news paper, car sales, gas station mangers participate in autonomy organization. Private organization consist of educational organization, social welfare corporate and district head council, as well as some teachers and farmers.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.105-108
• /
• 1996

Localized or radiating pain in the arm and shoulder joint may result after faulty alignment causing compression or tension on nerves, blood vessels, or supporting soft tissues. The critical site of faulty alignment is the quadrangular space in the axilla bounded by the teres major, teres minor, long head of triceps, and humerus. The axillary nerve emerges through this space to supply the deltoid and teres minor. The activity of the trigger point on teres minor compressing the axillary nerve causes pain to develop through the area of sensory distribution of cutaneous branch of the axillary nerve. Relieving compression on the axillary nerve and suprascapular nerve is the key point to relieving the pain. Spasm of the supraspinatus and infraspinatus compressing the suprascapular nerve caused pain to develop in the shoulder joint and scapular area. We treated those patients experiencing such pain with local anesthetic infiltration or I-R laser stimulation on the identified trigger points.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.3
• /
• pp.27-34
• /
• 1998

The paper is the second part on the 3-D sound-field creation implementing the Virtual Reality Ship Handling Simyulator(VRSHS). As mentioned in the previous part Ⅰ, the spatial impression, which arose from reproduced 3-D sound-field , give natural sound environmental context to a listener. This spatial impression is due to the reverberation by reflections and ,is can be obtain by using Head-Related Transfer Function(HRTF). In this work, we foumulate early and late reverberation models of the HRTF's with theoretical control factors based on the sound-energy distribution in an irregularly shaped enclosures. Using the reverberation models, we report results from psychophysical tests used to asses the validity of the proposed 3-D soud-field control method.