• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.18-25
• /
• 2018

The head frame structure of a machine tool for aircraft parts, which requires machining precision and machining of difficult-to-cut materials is required to be light-weighted for precision high-speed machining and to minimize possible deformation by cutting force. To achieve high stiffness and for light-weight structure optimization design, a preliminary model was designed based on finite element analysis. The topology optimization design of light-weight, high stiffness, and low vibration frame structure were performed by minimizing compliance. As a result, the frame weight decreased by 17.3%, the maximum deflection was less than 0.007 mm, and the natural frequency increased by 30.6%. The static stiffness was increased in each axis direction and the dynamic stiffness exhibited contrary results according to the axis. Optimized structure with the high stiffness of low vibration in topology optimization design was confirmed.

• Journal of Korea Game Society
• /
• v.17 no.6
• /
• pp.19-28
• /
• 2017

There exist a variety of VR(Virtual Reality) contents that have been developed by the use of the latest VR technologies. Unlike the rapid advances in the recent VR devices however, the development of VR based game contents that fully utilize such cutting-edge devices has been lackluster. Using more accessible form of smartphone-based HMDs(Head-Mounted Displays), we compare two popular VR presentation methods(a realistic 3D VR karaoke room and a 360 degree video karaoke room) and analyze their users' immersion and realistic perception. We expect that our study can be utilized as a supporting guideline for future smartphone-based VR content developments.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.383-399
• /
• 2020

Optimizing the spacing of the disc cutter is a key element in the design of the TBM cutter head, which determines the drilling performance of the TBM. The full-scale linear cutting test is known as the most reliable and accurate test for calculating the spacing of the disc cutter, but it has the disadvantage of costly and time-consuming for the full-scale experiment. In this study, through the numerical analysis study based on the discrete element method, the tendency between Specific Energy-S/P ratio according to uniaxial compression strength and penetration depth of rock was analyzed, and the optimum spacing of 17-inch disc cutter was derived. To examine the appropriateness of the numerical analysis model, the rolling force acting on the disc cutter was compared and reviewed with the CSM model. As a result of numerical analysis for the linear cutting test, the rolling force acting on the disc cutter was analyzed to be similar to the rolling force derived from the theoretical formula of the CSM model. From the numerical analysis on 5 UCS cases (50 MPa, 70 MPa, 100 MPa, 150 MPa, 200 MPa), it is found that the range of the optimum spacing of the disc cutter decreases as the rock strength increases. And it can be concluded that 80~100 mm of disc cutter spacing is the optimum range having minimum specific energy regardless of rock strength. This tends to coincide with the optimal spacing of previously reported disk cutters, which underpins the disk cutter spacing calculated through this study.

• (The)Study of the Eastern Classic
• /
• no.34
• /
• pp.225-255
• /
• 2009

Few data on the epigraph from the Bal-Hae Dynasty have been reported so far. The present paper, based on an examination of the style of the epitaphic tombstones of Princess Jeong-Hye and Princess Jeong-Hyo, investigates the historical formation and characteristics of Balhae's epitaphic style and its influences on the posterior periods. The epitaphs from the Bal-Hae Dynasty have the following epigraphic characteristics and historical significances. First, Bal-Hae's epitaphs are similar to those from the Goguryeo Dynasty in the sense that they are angular in their form. Tombstones with angular head first appeared during the East Han period. During the Wi-Jin period, however, as tombstones were not allowed to be erected in front of the tomb, small-sized epitaphic tombstones were set up inside tombs. Typical tombstones from the Dang Dynasty had stone pole and square cover. Unlike those from the Dang and the Tong-Il Silla Dynasties, however, the epitaphs from Bal-Hae had angular head in their tombstone body. The Bal-Hae's angular headed tombstones are very likely to testify that Goguryeo's epitaphs, which features an influence from the Wi-Jin Nambuk-Jo period, in turn exerted an effect on those from the Bal-Hae Dynasty. Second, Bal-Hae's epitaphic tombstones are characterized by their hexagonal head,which were modified from the then typical pentagonal head by cutting out the sharp point. The hexagonal head, which has not been found in its neighboring countries during the same historical period, is peculiar to the epitaphic tombstones from the Bal-Hae Dynasty. Third, the edge lines and ornamental figures first appeared in Bal-Hae's epitaphic tombstones, as seen in those of Princess Jeong-Hye. In the fa?ade of the epitaphic tombstone, a carved line demarcates its rectangular body and trapezoidal head. Four faces of the body stonehave two parallel lines in their edges within which vignette was inscribed, and the trapezoidal head part was ornamented with flower figures. Fourth, Bal-Hae's epitaphic tombstone had an extensive influence on the posterior countries in its neighborhood. The epitaphic tombstones in the Bal-Hae style are very often found in those of the Goryeo Dynasty and the Yo Dynasty which were greatly influenced from Bal-Hae. The vestiges of Bal-Hae's epitaphic style are also found in those from the Song, the Geum, and the Won Dynasties.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.51-61
• /
• 2022

Earthenware horn cups with horse head decorations were excavated from Tomb No. 7 of Bokcheon-dong, Dongraegu, Busan Metropolitan City. Made of earth in the shape of a horn, these cups are considered to have been used to drink alcohol or beverage. Large numbers of earthenware horn cups of various shapes were excavated from tombs located in the old territories of Silla and Gaya. A pair of earthenware horn cups were excavated from Tomb No. 7, and the two cups are almost identical in overall shapes and manufacturing techniques despite different sizes. Conservation treatment was carried out for the bigger one of the two horn cups this time. There are two cracks toward the horse head decorations around the mouth with missing parts observed. The chest of the horse touches the ground with one side decorating the horse head and the other side facing the conical mouth of the horn cup. It is in the U shape, striking a balance based on two legs attached behind. The surface of the horn cup was made with a potter's wheel, and the connection to the horse head has traces of cutting and trimming. The horse head is expressed realistically with its features including the ears, eyes, nose, and mouth well apprehended and its color is grey This study intended to investigate manufacturing techniques of the artifact by examining its internal structure through the condition survey in a non-destructive way. CT imaging was used to figure out its manufacturing techniques and to diagnose its condition, and accordingly the scientific conservation treatment was conducted to stabilize the artifact. The precise diagnosis on conservation condition found that there are two chips in the spout with their cracks extended. One of the chips is connected with separation added to the crack. The material which has been used for connection in the past was collected for the infrared spectroscopic analysis, which was identified to be nitrocellulose resin for the connection. Therefore, this conservation treatment focused on removing the old material and preventing the spread of cracks. Before conservation treatment, the condition survey and scientific examination for the artifact were carried out to secure data about the earthenware horn cup with horse head decorations(Treasure). Based on them, effective plans for its conservation treatment was sought for and then existing adhesive was safely removed, and restoration material was selected to take into account its reversibility. In addition, the conservation treatment according to optimal methodologies was conducted through the consultation meeting with experts.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.2 no.2
• /
• pp.156-160
• /
• 2006

Self-injurious behavior is defined as deliberated harm to one's own body without suicidal intent. It usually occurs as head banging or hitting, body hitting, skin cutting, or finger biting and includes ocular, genital, and self-inflicted oral mutilation. Self-injurious behavior can occur with mental retardation, comatose status, psychotic problem, poisoning, or character disorders. In pediatric patients, self-injurious behavior usually is reported to lip, cheek and tongue biting, and many kinds of dental management methods have been introduced to prevent self-injurious behavior patients from self biting. This report presents some self-inflicted oral mutilation patients who were all treated successfully with several appliances.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.1
• /
• pp.23-29
• /
• 2014

The purpose of this paper is to assess the structural integrity of piping penetrations for nuclear power plants. A piping qualification analysis describes loads due to deadweight, pressure difference acts normal to the plate, thermal transients, and earthquakes, among other events, on piping penetrations that have been modeled as an anchor. Amodel was analyzed using a commercial finite element program. Apiping penetration analysis model was constructed with an assembly of pipe, head fittings and sleeves. Normally, the design load, thus obtained, will consist of three moments and three forces, referred to a Cartesian coordinate system. When comparing the stress analysis results from each required cutting position, the general membrane stress intensities and local membrane plus bending stress intensities during a structural evaluation cannot exceed the allowable amount of stress for the design loads. Therefore, the piping penetration design satisfies the code requirements.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.3
• /
• pp.3-6
• /
• 2008

Electrolytic in-process dressing (ELID) grinding is a new technique for achieving a nanoscale surface finish on hard and brittle materials such as optical glass and ceramics. This process applies an electrochemical dressing on the metal-bonded diamond wheels to ensure constant protrusion of sharp cutting grits throughout the grinding cycle. In conventional ELID grinding, a constant source of pulsed DC power is supplied to the ELID cell, but a feedback mechanism is necessary to control the dressing power and obtain better performance. In this study, we propose a new closed-loop wheel dressing technique for grinding wheel truing that addresses the efficient correction of eccentric wheel rotation and the nonuniformity in the grinding wheel profile. The technique relies on an iterative control algorithm for the ELID power supply. An inductive sensor is used to measure the wheel profile based on the gap between the sensor head and wheel edge, and this is used as the feedback signal to control the pulse width of the power supply. We discuss the detailed mathematical design of the control algorithm and provide simulation results that were confirmed experimentally.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.91-97
• /
• 2020

A split-die design for the cold forging of symmetric parts such as those having a hexagonal cross-section is presented in this paper. Parts with a hexagonal cross-section, such as bolt heads and nuts, should be forged with a die that has a hexagonal-shaped hole. A split type die is required to mitigate the buildup of stress concentrations located at the corners of the hexagonal hole. Generally, the insert of a hexagonal die is made by cutting each corner of a cylinder using a hexagonal hole and then combined with the die and shrink-fitted. However, split dies face problems when extruding material at the corners of the hexagonal split die. To address this problem, two types of split dies were evaluated: rounded hexagonal dies and angular hexagonal dies. The effects of the pre-stress ring on the dies were compared and analyzed and results show that using the angular split hexagonal die can extend the lifetime of forging dies.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.119-125
• /
• 1999

At Wire Rod Mill Plant, wire is made of the billet produced at continuous casting machine, or rolled bloom produced at billeting mill, and the product can be classified of wire of 5.5${\Phi}$ and bar in coil of 14∼42${\Phi}$ in diameter(bar in coil will be referred to as coil as below). At present, wire is produced at POSCO No.1, 2, 3 WRM, coil at garret line of No. 2 WRM. Head and tail of coil are properly cut and treated to scrap to fulfill the customer's satisfaction. This above cutting is done off line, and small size coil can be cut manually with clipper, large size coil with hydraulic cutter. Nowadays, it is being investigated to cut automatically in line with trimming shear after passing mill stand. At the moment, Because the coil produced at the garret line of No.2 WRM is hot 400∼600$^{\circ}C$ and trimming is done manually with cutter, there are always interference from manual operation or safety problem of bad working condition. Not only because of the diversity of the coil size 14∼42${\Phi}$ in diameter, but because of the rolling speed 2.5∼22m/sec, it is required to be equipped with several trimming shear. But this can be accomplished with only one shear installed proper place at this paper.