• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1867-1870
• /
• 1997

A Laser Doppler Vibrometer (LDV) based on the heterodyne method was developed using He-Ne laser as a light source. The heterodyne method was employed to eliminate the ambiguity in the direction of the motion. The frequency shifted object beam (40 MHz) by a Bragg cell was focused on the surface of the moving target and the Doppler shifted reflected beam was combined at the fast photodetector to produce frequency modulated signal centered at 40 MHz. The signal from the detector was amplified, filtered and downconverted to intermediate frequency centered at 5 MHz. The voltage output that was proportional to the velocity of the moving surface was obtained using PLL. This LDV can be used to measure the resonant frequency of the electric equipments such as circuit breakers and bushings, of which resonant frequencies are changed when they are damaged.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.295-295
• /
• 2011

CIGS박막을 동시 증발법(co-evaporation)으로 몰리브덴이 증착된 소다라임 유리 위에 성장시켰다. CdS 박막은 화학적 용액 성장법 (chemical bath deposition: CBD)을 이용하여 약 60 nm를 증착하였다. 열처리는 가열판 (hot-plate)을 사용하여 공기중에서 하였다. 열처리 온도는 0~350$^{\circ}C$까지 변화하였으며, 열처리 시간은 각각 5분이었다. 시료의 표면 및 계면의 변화를 SEM측정을 통하여 관측하였다. CdS/CIGS 박막의 열처리 온도 변화에 따른 photoluminescence 특성을 조사하였다. 여기 레이저는 488 nm ($Ar^+$ laser)와 632.8 nm (He-Ne laser)를 사용하여 결함의 근원을 조사하였다. 온도 의존성 실험을 통하여 CIGS 박막의 띠 간격 에너지를 확인할 수 있었으며, 결함 준위의 활성화 에너지 및 특성을 알 수 있었다. $Ar^+$ laser에서만 관측되는 신호의 근원은 CdS에 기인한 것이었다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.6
• /
• pp.240-245
• /
• 2002

In this paper, a novel optical measuring system for the measurement of nonuniform electric field was proposed. The electric field distorted by the discharges was detected through proposed optical measuring system based on the Pockets effect and Mach-Zehnder interferometer. In order to produce distorted electric field, corona discharge was generated from needle-plane electrode in air and detected by optical measuring system. This optical measuring system is constructed by He-Ne laser, single mode optical fiber, $2{\times}2$ 50/50 beam splitter, $LiNbO_3$ Pockets cell, photo detector and PC. In this system, output signal of Pockels sensor is measured by digital oscilloscope and transferred to the PC for recording and statistical processing. Through this paper, a promising possibilities of proto-type optical measuring system were evinced.

• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.432-436
• /
• 1998

Recently, the PDLC(Polymer Dispersed Liquid Crystal) is being developed lively to make a large display device using a liquid crystal. Because of low light loss, high brightness, and simple fabrication process, it is made easily to large display device, In this study, the response time and light transmittance by the applied voltage is measured to analyze the electro-optical characteristics of PDLC. The He-Ne laser is applied to the PDLC cell, the light transmittance is measured using the photodiode and the result is analyzed and displayed graphically by the digital oscilloscope. The result of comparison between the PDLC and the present LCD is used to study the potential as a display device.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.129-133
• /
• 1998

The phtocount distributions of a quasi-thermal light source were measured by using the photoelectric counting method. The source was fabricated from the ground glass plate of 9${\mu}{\textrm}{m}$ roughness illuminated by linearly polarized He-Ne laser beam. The coherence time of the quasi-thermal light changed from 31.4$mutextrm{s}$ to 2.48$mutextrm{s}$ according to the grain velocity of the ground glass plate. The photocount distribution showed the Bose-Einstein statistics for a long coherence time compared to the counting time interval, while the distribution approaches the Poisson distribution when the coherence time much shorter than the counting time.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.161-164
• /
• 1997

A new hybrid, heterodyne, fiber-optic electric field sensor scheme is presented. In this scheme, a dual polarization, dual frequency, stabilized He-Ne laser is used for the light source of the interferometer, Probe beam is delivered to the sensor head using polarization maintaining fiber. In the sensor head, $LiTaO_3$ electro-optic crystal is used for sensing element. Phase retardation is induced on the dual frquency, dual polarization probe beam due to applied electric field across the crystal. Induced phase retardation is demodulated by in-phase and quadrature demodulation technique. In this way, we can obtain optimum sensitivity for electric field measurement regardless a quasi-static phase difference between two polarization components.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.200-213
• /
• 2004

The realization of partially coherent Gaussian Schell-model beams with isotropic cross section and anisotropic degree of coherence function is investigated theoretically. An optical system is devised to transform diffused light generated by passing the Gaussian beam of the He-Ne laser thorough a rotating holographic diffuser to the partially coherent Gaussian Schell-model beam with isotropic cross section and anisotropic degree of coherence function. Analytic design equations are formulated and design examples are presented.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.37-43
• /
• 1996

Two type interference air refractometers have been developed by using a frequency stabilized He-Ne laser in a transverse magnetic field. The refractometers were based on symmetric multiple pass interferometer. In this system, One part of the beams passed through air whose refractivity is to be measured and the other part of the beams passed through a vacuum champer to be used as a reference. Several measurements were performed under normal air condition. Maximum difference between two interference refractometers was ${\pm}2{\times}10^{-8}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.4
• /
• pp.286-291
• /
• 2000

$Cd_{1-x}Mn_{x}Te$ singe crystals were grown by the vertical Bridgman method and the Faraday rotations were measured as a function of wavelength and magnetic field. The Verdet constants were evaluated using the result of Faraday rotation. The Verdet constants were maximum at nearly absorption edge and increased for $0\leq x \leq 0.38 $ but decreased for x>0.40. We found that large Faraday rotation occur in $Cd_{0.62}Mn_{0.38}Te$ at nearly absorption edge wavelength was more useful for a magnetic field sensor than any other crystals, and $Cd_{0.60}Mn_{0.40}Te$ crystal was useful in this application when wavelength is He-Ne laser wavelength.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.291-296
• /
• 1997

The slotted type of hollow copper cathode was constructed and tested for its geometric stability and usability for laser operation at 780nm. The peak output power of copper ion laser emission was measured for different operating conditions. The IR-laser power was dependent on the parameters of the geometry of the hollow cathodes, discharge current and gas fillings. The peak power decreased with increasing neon pressure over 60%. One reason for this decrease in output power may be conjectured as hier due to the decreasing population of the upper laser level. The copper ion laser transition at 780 nm populated at the 5p level. The hollow cathode copper ion laser is operated in He and Ne mixture by electric discharge excitation and could be operated for more than 100 hours with only a 35% drop in the output power(2.8mW cw for 9.6cm active length).