• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.47-54
• /
• 2001

Similar patterned fire incidents such as, Inchon Live-Hof Pub Restaurant as, Sea-land Children Resort have proven that serious loss of lives were caused by hazardous gas generated from a combustion of interior finish and decorative materials. Therefore, comparing Korean fire regulation with other countries fire code, e.g. UK, USA, France about limitation of interior finish and decorative materials in premises as assemblies, differences & problems have been int estimated and analyzed on hew serious they may affect on fire spread and smoke development based on analyze facts. It is suggested that Korean fire code would be revised in order to reduce hazardous interior finish materials from special occupancy and adapted new test methods to verify proper fire performance in premises as assembles which require a fire certificate. Finally, detailed code alternatives will be suggested in order to set up effective fire regulation, which could promote preventing serious loss of lives in future.

• Journal of Sensor Science and Technology
• /
• v.31 no.3
• /
• pp.163-167
• /
• 2022

In this study, we investigated a carbon nanotube (CNT) film sensor to detect hazardous and noxious substances distributed in seawater. The response change of the sensor was studied according to environmental temperature, and its temperature coefficient of resistance (TCR, α) was measured. The temperature of the CNT film (~50 ㎛) was in the range of 20-50 ℃, and αCNT was calculated to be -0.0011 %/ ℃. We experimentally confirmed that the CNT film had a smaller TCR value than that of the conventional sensor. Therefore, we investigated the response change of the CNT sensor according to temperature. The CNT sensor showed a relatively small error of approximately 2.3 % up to 30 ℃, which is within the temperature range of the seawater of the Korean Peninsula. However, when the temperature exceeded 40 ℃, the error in the CNT sensor increased by more than 5.2 %. We fabricated a metal oxide (ITO, indium-tin-oxide) film and compared its performance with that of the CNT sensor. The ITO sensor showed an error of >12.5 % at 30 ℃, indicating that in terms of the stability of the sensor to temperature, the CNT film sensor has superior performance.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.433-438
• /
• 2016

The current study evaluated the air quality of the smoking booth equipped with the air purification system consisting of photocatalysts and air filters by measuring the concentrations of hazardous substances of tobacco smoke such as CO, HCHO, $CH_3CHO$, PM10 and PM2.5. To enhance the removal efficiency of hazardous substances, an infrared ray was exposed to improve the reactivity of OH radical generated from the photocatalyst toward environmental tobacco smoke (ETS) gas phase hazardous materials. It was found that the smoking booth with the air purification system improved the removal efficiency of hazardous substances containing formaldehyde by 85.2% compared to that of the smoking booth without any purification systems. In addition, the removal efficiency of the fine dust after treatment was enhanced up to 89.4%.

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.13-26
• /
• 2018

Currently, local regulations, such as KS Code, do not clearly specify how to calculate the range of hazardous area, so the dispersion modeling program should be used to select dispersion. The purpose of this study is to present a methodology of determining the range of hazardous area which is simpler and more reasonable than modelling by using representative materials and process conditions. Based on domestic and overseas regulations that are currently in effect, variables affecting distance to LFL(Lower Flammable Limit) were selected. A total of 16 flammable substances were modelled for substance variables, process conditions variables, and weather conditions variables, and the statistical analysis selected the variables that affect them. Using the selected variables, a three-step classification method was prepared to select the range of locations subject to explosion hazard.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.212-219
• /
• 2009

Emission characteristics of air pollutants from three commercially operating cement kilns co-burning waste were investigated. The major heavy metals emitted were mercury (Hg), zinc (Zn), nickel (Ni), chromium (Cr), lead (Pb), cadmium (Cd), and arsenic (As) Removal efficiency of the bag filter was above 98.5% for heavy metals (except Hg), and above 60% for Hg. Higher fractions of heavy metals entering the bag filter were speciated to cement kiln dust. On average, 3.3% of the -heavy metals of medium and low toxicity (Pb, Ni, and Cr) entering the bag filter were released into the atmosphere. Among highly toxic heavy metals, 0.14% of Cd, 0.01% of As, and 40% of Hg entering the bag filter were released into the atmosphere. In passing through the bag filter, the proportion of oxidized Hg in all cases increased. Emission variations of hazardous air pollutants in cement kilns tested were related to raw materials, fuel, waste feed and operating conditions. Volatile organic compounds detected in gas emissions were toluene, acrylonitrile benzene, styrene, 1,3-butadiene, and methylene chloride. Although hazardous air pollutants in emissions from cement kilns co-burning waste were within the existing emission limit, efforts are required to minimize their levels.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.100-107
• /
• 2015

Korea government has established and enforced countermeasures about the various policy of industrial accident prevention. Recent chemical accidents included hazardous materials. Exposure to these chemicals can cause serious environmental poisoning and various health problems. The key factor causing these major accidents may be associated with the mistake in workers' safety behaviors. Some researchers noted workers' safety behaviors may be related to workers' safety climate. In this research, a survey was conducted to explore workers' safety behaviors and safety climate in a large petrochemical company in Korea. The company processes major petrochemical materials and any spills can be hazardous and cause chemical disasters. In this study, we explored one petrochemical company to investigate three hypotheses. 593 workers were surveyed for this study. We checked association between workers' safety behavior and safety climate. The survey result shows the people who have safety climate do safe behavior.

• Fire Science and Engineering
• /
• v.21 no.2 s.66
• /
• pp.64-73
• /
• 2007

The absorption characteristics of hazardous materials onto human body and defense mechanism differ from each other region within the respiratory tracts, thus adverse health effects of inhaled smokes are associated with not only the concentration but also the location of the particles deposited. In this work, the deposition fraction per surface area and the deposition sites of the smoke particles in human respiratory tracts for each rest and light exercise conditions together with oral and nasal breathing were calculated by using segmental volume tracking method. The results would be used for deriving the amount of absorption of hazardous materials onto human body, thus contribute to the health risk assessments of inhaled fire smokes.

• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.447-450
• /
• 2010

In this study, the improved large-scale synthetic route for epinastine hydrochloride, the second-generation antihistamine, was developed. The original synthetic route involves the synthesis of an aminomethyl derivative, the main intermediate, and in this process hazardous materials such as very toxic phosgene and sodium cyanide along with the explosive and expensive aluminum chloride and lithium aluminum hydride were used. In order to improve the synthetic route, we developed industrially very useful process to prepare the aminomethyl intermediate by the synthesis of the phthalimidomethyl derivative first and easy removal of the phthalyl group using hydrochloric acid or methyl hydrazine, and hazardous materials and expensive reagents were excluded in this process.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.61-68
• /
• 2015

This study develop accident response program for the hazardous materials(HAZMAT) transport vehicle with materials database and guidelines for accident response. Guidelines was developed by guideline develop processes of FEMA after identify hazards. Developed material database was applied the GHS. also database was optimized by removing data that can confuse to accident response. Finally, This study verify developed programs through case study.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.23-29
• /
• 2018

The fire and explosion properties necessary for waste, safe storage, transport, process design and operation of handling flammable substances are lower explosion limits(LEL), upper explosion limits(UEL), flash point, AIT( minimum autoignition temperature or spontaneous ignition temperature), fire point etc., An accurate knowledge of the combustion properties is important in developing appropriate prevention and control measures fire and explosion protection in chemical plants. In order to know the accuracy of data in MSDSs(material safety data sheets), the flash point of phenol was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of phenol was measured by ASTM 659E apparatus. The explosion limits of phenol was investigated in the reference data. The flash point of phenol by using Setaflash and Pensky-Martens closed-cup testers were experimented at $75^{\circ}C$ and $81^{\circ}C$, respectively. The flash points of phenol by Tag and Cleveland open cup testers were experimented at $82^{\circ}C$ and $89^{\circ}C$, respectively. The AIT of phenol was experimented at $589^{\circ}C$. The LEL and UEL calculated by using Setaflash lower and upper flash point value were calculated as 1.36vol% and 8.67vol%, respectively. By using the relationship between the spontaneous ignition temperature and the ignition delay time proposed, it is possible to predict the ignition delay time at different temperatures in the handling process of phenol.