• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.35.1-35.1
• /
• 2010

The Cu(In,Ga)Se2(CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, many groups made hard efforts to overcome its disadvantages in terms of high absorption of short wavelength, Cd hazardous element. Among Cd-free candidate materials, the CIGS thin film solar cells with Zn compound buffer layer seem to be promising with 15.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, few groups were successful to report high-efficiency CIGS solar cells with Zn compound buffer layer, compared to be known how to fabricate these solar cells. Each group's chemical bah deposition (CBD) condition is seriously different. It may mean that it is not fully understood to grow high quality Zn compound thin film on the CIGS using CBD. In this study, we focused to clarify growth mechanism of chemically deposited Zn compound thin film on the CIGS, especially. Additionally, we tried to characterize junction properties with unfavorable issues, that is, slow growth rate, imperfect film coverage and minimize these issues. Early works reported that film deposition rate increased with reagent concentration and film covered whole rough CIGS surface. But they did not mention well how film growth of zinc compound evolves homogeneously or heterogeneously and what kinds of defects exist within film that can cause low solar performance. We observed sufficient correlation between growth quality and concentration of NH3 as complex agent. When NH3 concentration increased, thickness of zinc compound increased with dominant heterogeneous growth for high quality film. But the large amounts of NH3 in the solution made many particles of zinc hydroxide due to hydroxide ions. The zinc hydroxides bonded weakly to the CIGS surface have been removed at rinsing after CBD.

• 한국분무공학회지
• /
• 제20권1호
• /
• pp.28-34
• /
• 2015

Recently, some researchers have been carried out risk assessment of vehicles exhaust on human health. Especially, some of VOCs which is non-controlled, was classified to hazardous pollutant, such as 1,3-Butadiene and BTEX(Benzene, Toluene, Ethylbenzene and Xylene). Therefore, the profile on non-controlled pollutant may be needed in the future, because it would be critical data or information to control them. Additionally, with increasing amount of motorcycle, the source profiling is essential for estimating emission factor and amount on motorcycle exhaust. For these, in this study, imported motorcycles (8 vehicles) were selected as a test model while considering the increasing ratio on sales volume between 2013 and 2014; it was also compared with domestic motorcycles on those. The experiment was conducted by driving mode, UDC and ECE+EUDC that made from EURO III. In addition, it was performed at cold start driving mode without effect by displacement, for evaluating only correlation of BTEX with HC. In order to apply the ratio (m,p-Xylene/o-Xylene) as a marker, the ratio was compared with those of tunnel, road side and residential area. As a result, it showed best correlation ($R^2=0.98$) among those. In the future, it has to be considered as a marker for effect evaluation to atmospheric environment by exhaust emission.

• 한국산업보건학회지
• /
• 제25권2호
• /
• pp.194-201
• /
• 2015

Objectives: The purpose of this study is to assess the exposure level to dust and airborne microorganisms among employed workers in a clothing shopping center. Materials and Methods: On-site investigation of a clothing shopping center was performed between October and November 2012. The hazardous substances measured in this study are particulate matter(Total dust, respirable dust) and airborne microorganisms (Total airborne bacteria, total airborne fungi). Results: The highest geometric mean levels of particulate matter(total dust, respirable dust) for personal sampling were $1.735(SD:0.883)mg/m^3$ for total dust and $0.0711(SD:0.008)mg/m^3$ for respirable dust, respectively. Those for area sampling were $0.625(SD:0.091)mg/m^3$ for total dust and $0.0718(SD:0.012)mg/m^3$ for respirable dust, respectively. The highest geometric averaged concentrations of airborne microorganisms(Total airborne bacteria, total airborne fungi) were detected at $1,181(SD:105)cfu/m^3$ for total airborne bacteria and $683(SD:114)cfu/m^3$ for total airborne fungi, respectively. Concentrations of particulate matters and airborne microorganism in clothes shopping center did not correlate significantly with environmental factors such as temperature or relative humidity. Conclusions: Exposure levelshave not been established for service workers. Thus, health risk assessment for this group is very difficult. Health guidelines for service workers should be established as soon as possible.

• 에너지공학
• /
• 제28권4호
• /
• pp.29-34
• /
• 2019

본 연구에서는 수소 복합충전소에 대하여 정량적 위험성 평가를 실시하였다. 평가대상의 복합충전소는 수소-LPG이며 각 충전소의 설비 구성을 분석하고 위험도를 평가하였다. 최종 위험도는 피해영향과 사고빈도를 고려한 개인적 위험성과 사회적 위험성으로 평가한다. 본 연구의 대상이 된 수소-LPG 충전소에 대한 개인적 위험도 산출 결과, 수소-LPG 형태의 복합충전소는 HSE에서 제안하고 있는 허용 불가수준의 위험지역(> 1×10E-3)은 나타나고 있지 않으며, 작업자와 일반인에 대한 개인적 위험수준이 모두 허용범위 내에 분포하고 있다. 그리고 사회적 위험도 평가에서는 해석대상 모델이 허용 가능한 범위(ALARP, As Low As Reasonably Practicable)의 위험도 분포를 보이고 있다. 보다 향상된 안전성 확보를 위해 위험도 순위화 결과에서 높은 위험도를 보이고 있는 수소 저장용기, 디스펜서, 튜브트레일러 누출 및 LPG의 Vapour 회수 라인 등에 대한 정기적인 점검 및 확인을 권장한다.

• 환경영향평가
• /
• 제14권2호
• /
• pp.83-96
• /
• 2005

Brominated flame retardants have the market share of 40%, comparing others because of their low cost and highly effective retardation against the flame. However, their toxic effects in human and properties of the accumulation in the environments have been issued among the international organization such as EU, OECD and etc. It, therefore, was surveyed the classification, toxic effects, and the usage of Brominated flame retardants, the trends for their managements in the world and Korea, and their contaminated levels in Korean Peninsula. In addition, the management directions for them were proposed. Penta, octa, and deca-BDE among brominated retardants will seem to be prohibited by the regulation as a flame retardants for plastics in Europe because of their toxic effects. Although Penta and Octa BDEs was used marginally in Korea, deca-BDE was 27% of brominated flame retardants (49,050 ton) which had been used in 2002. However, risk assessment for brominated retardants might not launched in Korea, yet. These reports demonstrate that toxic brominated retardants such as PBDEs will be assessed for their usage and the level of contamination in the environment in the area of the point sources like the industrial areas, incinerators and etc. However, the law to regulate the hazardous chemicals seems not to be dictated the monitoring of their contamination in the environment. We, therefore, suggest how to evaluate and to monitor the toxic contaminants with EIA (Environmental Impact Assessment) and LCA (Life Cycle Assessment) system. Further, to establish the management system of BFRs (such as the monitering of contamination levels in environments, life cycle assessment, and risk assessment for the toxic chemicals), It can be recommended the law to deal with the method analyzing chemicals will be established, which contains QA/QC (Quality Assurance and Quality Control) to evaluate the analytic capability of the companies to prepare EIS (Environment Impact Statement) or other institutes for analyzing chemicals.

• 청정기술
• /
• 제13권3호
• /
• pp.161-172
• /
• 2007

청정기술의 발전을 위하여 나노기술이 융합된 새로운 기술의 도입이 필요하다. 최근 개발된 나노입자, 나노튜브 등은 이미 많은 소비재의 원료로 사용되고 있으며, 인체 및 환경에 쉽게 노출될 수 있다. 이러한 나노입자는 작은 크기와 넓은 비표면적 특성으로 인해 기존물질에 비하여 반응성이 높고 인체나 환경에 독성을 나타낼 커다란 잠재성을 가지고 있으며, 이미 많은 연구결과에서 이러한 나노물질이 인체 및 환경 유해성을 유발하는 원인과 결과에 대하여 보고하고 있다. 본 논고에서는 나노기술 기반 청정기술 발전의 방향을 제시하기 위하여 나노물질의 인체 및 환경 유해성에 관한 위험성평가 방안을 검토하고, 나노물질의 잠재적인 위해성을 살펴보고자 한다.

• 한국컴퓨터정보학회논문지
• /
• 제21권8호
• /
• pp.57-64
• /
• 2016

Initial prevention activities and rapid propagation conditions is the most important to prevent diffusion of water pollution. If water pollutants flow into streams river or main stresm located in environmental conservation area or water intake facilities, we must predict immediately arrival time and the diffusion concentration to the proactive. National Institute of Environmental Research developed water pollution incident response prediction system linking dam and movable weir. the system is mathematical model which is updated daily. Therefore it can quickly predict the arrival time and the diffusion concentration when there are accident of oil spills and hazardous chemicals. Also we equipped with mathematical model and toxicity model of EFDC(Environmental Fluid Dynamics Code) to calculate the arrival time and the diffusion concentration. However these systems offer the services of an offline manner than real-time control services. we have ensured the reliability of data collection and have developed a real-time water quality measurement data transmission device by using the data linkage utilizing a mode bus communication and a commercial SCADA system, in particular, we implemented to be able to do real-time water quality prediction through information infrastructure of the water quality integrated management business created by utilizing the construction of the real-time prediction system that utilizes the data collected, the Open map, the visual representation using charts API and development of integrated management system development based on web maps.

• Nuclear Engineering and Technology
• /
• 제2권2호
• /
• pp.97-106
• /
• 1970

원자력연구, 개발, 응용 및 이용사업이 시작된지 10년이 된 오늘날, 방사선을 포함한 오염사고등이 수많이 일어났고(Tablet 참조) 이들 방사선 사고로 인하여 인체 및 시설, 기구등에 까지도 자그마한 피해나마 장해 및 손상을 주었을 것이다. 이들 방사선 사고 가운데 비교적 주요한 4건의 방사선 피폭을 포함한 신체오염 사고, 말하자면 1) Cobalt-60 gamma선으로 부터의 전신피폭사고 (130 rem), 2) iodine-131에 의한 실험실내의 표면오염사고(13 mrad/hr), 3) 기체상의 iodine-131로 인한 전신오염 사고(흡입때문에 갑상선에 집적된 방사능량: 0.36$\mu$Ci) 4) 치료용 Radium 선원의 누출로 인한 Capsule이 텅빈사고［3 mg(\ulcorner)］, 등에 대하여 발견하는 즉시 최대의 노력과 최소의 비용으로써 조사, 측정하고 아울러 사고의 확대를 줄이기 위하여 가능한 모든 조처를 취하였으며, 사고의 요인분석, 평가를 하였다.

• 대한조선학회논문집
• /
• 제52권2호
• /
• pp.153-160
• /
• 2015

Pipelines are one of the most important structures in subsea equipment. It is the main equipment for transportation of crude oil and natural gas to the downstream facilities. Crude oil and natural gas leak will be carry out not only political and financial issues but also pollution to the environment. Inaccurate predictions of corrosion behavior will make hazardous consequences. The serviceability assessment of corroded structures is essential especially for subsea pipelines. As corrosion is concerned, the effects of failure due to significant reduction will make it hard to the pipeline operator to maintain the serviceability of pipelines. In this paper, the serviceability assessment of corroded crude oil pipeline is performed using the industry design code (Shell92, DNV RP F101, ASME B31G, BS 7910, PCORRC) and FEA depending on corrosion area. In last step, the future integrity of the subsea crude oil pipeline is assessed to predict the remaining year in service of crude oil pipelines.

• 한국가스학회지
• /
• 제8권4호
• /
• pp.55-61
• /
• 2004

본 논문에서는 발전소의 발전기 냉각시스템에서 수소를 사용하므로써 발생가능한 문제점에 대한 안전대책에 관하여 언급하였다. 수소가스는 가연성 기체중 폭발범위가 대단히 크므로 이에 따른 안전대책을 강구해야 하며, 이것은 전력설비의 안정적인 운영을 위해서도 중요한 일이다. 본 연구에서는 1) 수소의 연소폭발재해와 관련된 기술적 지침을 제공함; 2) 운영환경의 위험수준에 따라 위험장소 구분하고 그에 따른 방폭전기설비의 채용; 3) 가스누설검지장치 설치 등 수소로 인한 재해를 미연에 방지할 수 있는 대책 및 기준 마련; 4) 발전소 정상운전중 안전관리체계를 정립하여 발전소 수소가스설비관련 안전관리의 표준모델을 제시하고자 하였다.