• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.15-29
• /
• 2005

Truck Shipment Safety Information, which is a part of the development of NERIS is divided into Optimal Route Guidance System and Emergency Response System. This research is for establishing an advance warning system, which aims for preventing damages(fire, explosion, gas-escape etc.) and detecting incidents that are able to happen during transporting hazardous materials in advance through monitoring the position of moving vehicles and the state of hazardous materials in real-time. This research is peformed to confirm the practical possibility of application of the advance warning system that monitors whether the hazardous materials transport vehicles move the allowed routes, finds the time and the location of incidents of the vehicles promptly and develops the emergency system that is able to respond to the incidents as well by using the technologies of CPS, CDMA and CIS with testing the ability of performance. As the results of the test, communication accuracies are 99$\%$ in freeway, 96$\%$ in arterial, 97$\%$ in hilly sections, 99$\%$ in normal sections, 96$\%$ in local sections, 99$\%$ in urban sections and 98$\%$ in tunnels. According to those results, the system has been recorded a high success rate of communication that enough to apply to the real site. However, the weak point appeared through the testing is that the system has a limitation of communication that is caused in the rural areas and certain areas where are fewer antennas that make communication possible between on-board unit and management server. Consequently, for the practical use of this system, it is essential to develop the exclusive en-board unit for the vehicles and find the method that supplements the receiving limitation of the GPS coordinates inside tunnels. Additionally, this system can be used to regulate illegal acts automatically such as illegal negligence of hazardous materials. And the system can be applied to the study about an application scheme as a guideline for transporting hazardous materials because there is no certain management system and act of toxic substances in Korea.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.73-79
• /
• 2009

Hazardous materials (HazMats) are substances that are flammable, explosive, toxic, or harmful, if released into the environment. Since the transportation of HazMats increases in many developed countries, HazMat transportation has the key function in the process of HazMat usage to trace information of production, storage, shipment, usage, and waste disposal. The Korean Ministry of Environment (KMOE) and the National Emergency Management Agency (NEMA) have developed many laws, regulations, and standards for hazardous materials. However, the Korean HazMat laws, regulations, and standards do not guarantee accurate information of HazMat origin-destination (O-D) shipments, though the HazMat O-D movement is the critical information in safety and security of HazMat transportation. The objectives of this research are: (1) to investigate emerging and recurrent issues in Korean HazMat transportation, and (2) to develop the estimation method of O-D matrices for hazardous materials under limited data sets. The sodium hydroxide waste shipment among forty candidate HazMats is selected as the sample research case. The growth-factor method is applied to estimate the 2005 O-D matrix of sodium-hydroxide waste shipment. The column-and-row factoring process is used to calibrate the estimated sodium-hydroxide O-D matrix. The result shows the applicability of the O-D estimation process for hazardous materials. The Sodium Hydroxide Waste Origin-Destination Matrix is obtained to trace routes and paths of the Sodium Hydroxide transportation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.208-210
• /
• 2015

After the huge explosive accident in port of Tianjin, it is being strengthened on the dangerous goods regulations. This also has been make an extra impact which must meet international standards and even different parts became possible import customs regulations exporting from Korea. Since 2004, internationally in compliance with the enforced the transport of dangerous goods regulations (IMDG Code), but becomes substantial damage to the domestic industry that exports of dangerous goods is a lot of difficulties in the logistics of efficiency due to possible follows only the clearance to the needs of the Chinese Government. In Korea and secure hazardous materials management needs have emerged, but piecemeal ad hoc policy is connected economically costly and unnecessary regulations weighted long-term safe at the same time enables continuation of the development of the only domestic chemical industry to find effective hazardous materials management plan it is.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.67-77
• /
• 2010

Growth of oil and chemical industries has been remarkable during recent years. Hazardous materials (Hazmat) make frequent use in the wide range of industries. It increases the frequency of Hazmat transport and it leads to increase the number of accidents. Optimal Hazmat routes can reduce damage. Thus, the objective of this study is to minimize the areas impacted by Hazmat accidents by adopting experts' opinion in planning the route. We calculated weights using AHP (Analytic Hierarchy Process) and deduced the best route by applying this weights. Results showed that in the case of shortest route versus weighted route, the percentage of population damage has been decreased by 33.4% in the comparison between shortest route and optimally weighted route. And the percentage of environmental damage also has been decreased by 21.8%. Social damage has been decreased by 1521.7%. In the case of none weighted route versus weighted route, the percentage of population damage has been decreased by 2.6% when we adopted weighted route. Consequently, the recommended route with weighted risk assessment avoids densely populated area comparing with none weighted route. Further research needs to be carried out in order to figure out the specific cost-effectiveness analysis applying the equal cost unit for each factor.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.23-29
• /
• 2018

The fire and explosion properties necessary for waste, safe storage, transport, process design and operation of handling flammable substances are lower explosion limits(LEL), upper explosion limits(UEL), flash point, AIT( minimum autoignition temperature or spontaneous ignition temperature), fire point etc., An accurate knowledge of the combustion properties is important in developing appropriate prevention and control measures fire and explosion protection in chemical plants. In order to know the accuracy of data in MSDSs(material safety data sheets), the flash point of phenol was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of phenol was measured by ASTM 659E apparatus. The explosion limits of phenol was investigated in the reference data. The flash point of phenol by using Setaflash and Pensky-Martens closed-cup testers were experimented at $75^{\circ}C$ and $81^{\circ}C$, respectively. The flash points of phenol by Tag and Cleveland open cup testers were experimented at $82^{\circ}C$ and $89^{\circ}C$, respectively. The AIT of phenol was experimented at $589^{\circ}C$. The LEL and UEL calculated by using Setaflash lower and upper flash point value were calculated as 1.36vol% and 8.67vol%, respectively. By using the relationship between the spontaneous ignition temperature and the ignition delay time proposed, it is possible to predict the ignition delay time at different temperatures in the handling process of phenol.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.54-60
• /
• 2016

In this study, tank truck incidents of road transport of hazardous materials to experimental investigated the potential fire hazard. Real scale fire was to perform experiments for on this qualitative and quantitative data collection and analysis. Particularly affected by radiant heat from the flames caused and damage estimates range investigated accordingly. Flame temperature, internal temperature of tank and emitted radiation from the flames was investigated. The flame of light oil spill caused a fire at a temperature of about $300^{\circ}C$ high in comparison with the methanol by combustion of diesel and methanol, according to the difference, the flame duration changes varies depending on the Burning rate. Depending on spill rate(30, 60, 90 and $120{\ell}/min$) and the longer the duration of the flame important factors for the internal temperature of tank lorry rise was found. Road accident in a fire caused by leakage of hazardous was could the higher the damaged. Therefor, Fire suppression activities should be required in particular to be around.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.103-108
• /
• 2010

In this study, tank truck incidents of road transport of hazardous materials to experimental investigated the potential fire hazard. Real scale fire was to perform experiments for on this qualitative and quantitative data collection and analysis. Particularly affected by radiant heat from the flames caused and damage estimates range investigated accordingly. Flame temperature, internal temperature of tank and emitted radiation from the flames was investigated. The flame of light oil spill caused a fire at a temperature of about $300^{\circ}C$ high in comparison with the methanol by combustion of diesel and methanol, according to the difference, the flame duration changes varies depending on the Burning rate, amount of radiant heat flux from light oil fire was 4 times increases compared with fire of methanol. Depending on spill locations(kinds of road surfaces, absorbing rate) and the longer the duration of the flame important factors for the internal temperature of tank truck rise was found. Dirt roads than paved road accident in a fire caused by leakage of hazardous was could the higher the damaged. Therefor, Fire suppression activities should be required in particular to be around.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.87-97
• /
• 2015

Accidents of HAZMAT transport vehicle are generally dealt by unskilled firefighters. As a result, firefighters became 2nd victims of accidents in some case because of this reason, and it is required to prepare an accident response guidelines against HAZMAT transport vehicle accidents. In this study, risk assessment methods and making methods of guidelines were investigated to make accident response guidelines of HAZMAT transport vehicle accidents. and It identifies hazards and combines with guideword for making guideline items. At last, we determine criteria or detailed methods by referring survey regulations and existed methods.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.79-88
• /
• 2002

As a part of NERI:;, Truck Shipment Safety Information is divided into Optimal Route Guidance system and Emergency Response system. This study which is for developing of Truck Shipment Incident Emergency Response System intends to prevent or early response damage caused by incidents through realtime monitoring about the position and the state of Hazard material transport truck. For this, we divide it into three scenarios; realtime monitoring, management of incidents, information provision to related organizations and present functional requirements and architecture coming with each scenario. As a result of the first step among total three steps, it would able to not only realtime management of trucks but also guide for auto-enforcement or management about illegal act like dumping scrapped material. It is now under examination about position of detection and technology of communication to application. From now on, it is expect to test in the range of Metropolitan after selecting appropriate technology.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.186-189
• /
• 2019

Polypyrrole is a typical electrical conducting polymer, which has an excellent charge transport property. Cyclodextrins are a group of toxic-free and cyclic oligosaccharide molecules, capable of capturing low molecular weight chemicals. Considering these advantages, hybrid materials of polypyrrole and cyclodextrin can be used to detect hazardous compounds. Cyclodextrin molecules can accommodate toxic chemicals by the formation of host-guest complexes and generate electric signals, which are effectively delivered by polypyrrole backbone. In this study, the polypyrrole/cyclodextrin hybrid material was prepared using a facile wet method and included into a hydrogel. Subsequently, it was applied to a simple sensor system with a gold-patterned electrode for the detection of potentially hazardous material, methyl paraben. Compared with pristine polypyrrole, it was found that the polypyrrole/cyclodextrin hybrid showed an improved performance. This study can be an example of using environmentally benign conducting polymer/cyclodextrin hybrids as sensing media.