• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.89-96
• /
• 2000

Landslide damage comprise most part of the damages from the earthquake and it only causes the damage to lives and structures directly but also cease the operation of social system by road or lifeline failure. For these reasons hazard assesment on the landslides has been recognized very important. And hazard maps have been used to visualize the hazard of the landslide. In this study as first step for application of hazard map to domestic cases hazard maps are made for the Ul-Joo Ul-san Korea, Where the Yan-san faults are located. For building hazard maps the degree of hazard are evaluated based on Newmark displacement and the resulting maps are constructed by GIS technique. In hazard assesment maximum ground acceleration obtained from attenuation equation of wave propagation and design earthquake acceleration suggested by Ministry of construction are used for acceleration term. Hazard maps are made by GIS programs Arc/Info and Arc/View based on the digital maps and data from lab tests and elastic wave surveys The maps show the possible landslide regions significantly and the displacements of slide are proportional to the slope angles.

• Coupled systems mechanics
• /
• v.11 no.6
• /
• pp.505-524
• /
• 2022

Floods represent extreme hydrological phenomena that affect populations, environment, social, political, and ecological systems. After the catastrophic floods that have hit Europe and the World in recent decades, the flood problem has become more current. At the EU level, a legal framework has been put in place with the entry into force of Directive 2007/60/EC on Flood Risk Assessment and Management (Flood Directive). Two years after the entry into force of the Floods Directive, Bosnia and Herzegovina (B&H), has adopted a Regulation on the types and content of water protection plans, which takes key steps and activities under the Floods Directive. The "Methodology for developing flood hazard and risk maps" (Methodology) was developed for the territory of Bosnia and Herzegovina, following the methodology used in the majority of EU member states, but with certain modifications to the country's characteristics. Accordingly, activities for the preparation of the Preliminary Flood Risk Assessment for each river basin district were completed in 2015 for the territory of Bosnia and Herzegovina. Activities on the production of hazard maps and flood risk maps are in progress. The results of probable climate change impact model forecasts should be included in the preparation of the Flood Risk Management Plans, which is the subsequent phase of implementing the Flood Directive. By the foregoing, the paper will give an example of the development of the hydrodynamic model of the Zujevina River, as well as the development of hazard and risk maps. Hazard and risk maps have been prepared for medium probability floods of 1/100 as well as for high probability floods of 1/20. The results of LiDAR (Light Detection and Ranging) recording were used to create a digital terrain model (DMR). It was noticed that there are big differences between the flood maps obtained by recording LiDAR techniques in relation to the previous flood maps obtained using georeferenced topographic maps. Particular attention is given to explaining the Methodology applied in Bosnia and Herzegovina.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.509-516
• /
• 2001

As the first step for the application of seismic landslide hazard maps to domestic cases, two types of hazard maps on Ul-joo from pseudostatic analysis and Newmark sliding block analysis are constructed and comllared. Arcview, the GIS program and the 1:5,000 digital maps of the test-site are used for the construction of hazard maps and tile parameters for the analyses are determined by seismic survey and laboratory tests. The results from the pseudostatic analysis have more conservative values of lower critical slope angles, although the results from the two different analyses have similar tendencies. In detail, with increasing the peak ground acceleration, the difference between the two analyses in the critical slope angle increases, while the difference decreases with increasing the maximum soil depth.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.453-462
• /
• 2008

The objective of this paper is to compare the prediction performances of different landslide hazard maps based on topographic data stemming from different sources of elevation. The geostatistical framework of kriging, which can properly integrate spatial data with different accuracy, is applied for generating more reliable elevation estimates from both sparse elevation spot heights and exhaustive ASTER-based elevation values. A case study from Boeun, Korea illustrates that the integration of elevation and slope maps derived from different data yielded different prediction performances for landslide hazard mapping. The landslide hazard map constructed by using the elevation and the associated slope maps based on geostatistical integration of spot heights and ASTER-based elevation resulted in the best prediction performance. Landslide hazard mapping using elevation and slope maps derived from the interpolation of only sparse spot heights showed the worst prediction performance.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.141-150
• /
• 2000

In this study liquefaction hazard potential was assessed by modified Seed and Idriss method and maps of liquefaction hazard potential utilized by LPI(Liquefaction Potential Index) and FE(Equivalent Liquefaction Factor of Safety) were constructed in two dimensional space, Comparisons of liquefaction hazard maps assessed by LPI and FE are represented to verify the FE method proposed in this study. Based on the results of comparing liquefaction hazard map using LPI and FE there is similar distribution trend of zonation indices. from the result of comparison of liquefaction hazard maps of FE base using Hachinohe and ofunato PGA(Peak ground Acceleration) data at one site of port and harbor in Korea the values of FE in liquefaction hazard map using Hachinohe data are underestimated. And in the view of quantitative analysis FE is more convenient than LPI because types of results from FE are factor of safety that widely used in geotechnical practice and aseismic design standard for port and harbor in Korea.

• Spatial Information Research
• /
• v.4 no.1
• /
• pp.83-92
• /
• 1996

The inventory maps of landslide deposits show where landsliding has occured in the past., and serve as a general guide to slope stability. Isopleth maps derived from those inventory maps, provide an economi¬cal means for the recognition of landslide activity and assessing the degree of landslide hazard in a large area, es¬pecially rural areas. GIS could generalize the methods of hazard assessment by means of isopleth mapping of landslide deposits. Isopleth maps of Secheon and Boreong areas, where the degree of landslide hazard is very high, show the mitigation of landslide activities remarkably by the remedial efforts during the period of 1978-1991.

• Journal of the Korean association of regional geographers
• /
• v.20 no.1
• /
• pp.128-140
• /
• 2014

This study aims to investigate the characteristics and to classify the foreign volcanic disaster maps. Authors try to extract the components of volcanic disaster maps and apply them to the Mt. Baekdu volcano that receives worldwide attention recently has been on an early stage in Korea. Internationally, volcano ash disaster maps are derived and reviewed through three analytical framework components: Hazard Map, Risk Map, and Damage Map. These derived components of volcano ash disaster mapping systems are: 1) cumulative map of past disaster records, 2) probabilistic risk map, 3) scenario-based map and case-by-case utilization maps (evacuation response type, emergency information type, disaster preparedness education type) based on this components are presented.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.522-524
• /
• 2003

This paper presents the interactive method of showing geological hazard maps and other related information using the new GIS software developed at the Geological Survey of Japan. The main purpose of the software is to easily provide information about geological hazards to a wide range of users. The software incorporates spatial and a-spatial data to interactively present the time, locations and extent of occurrence of geological hazards and other related information. Queries for hazard information can be easily done. Simulations of the occurrence of a particular geological event like the spread of volcanic ash during major volcanic eruptions can also be easily shown.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.449-454
• /
• 2004

Nowadays, flood hazard maps have been generated to minimize the loss of human lives due to flooding domestically. To generate the flood hazard maps, LiDAR data have mainly been used to provide topographic data. The LiDAR data requires, however, relatively higher cost and processing time. Therefore, the needs of validating possible use of topographic maps as an alternative source of LiDAR, which have been already existed from the NGIS project over the nation, has been raised. In this background, this study has generated a DEM over City of Kuri as a pilot study using conventional 1:1,000 and 1:5,000 topographic maps emphasizing the linkage of river profile with breakline processing algorithm to build the essential topographic data as accurate as possible. The results showed that the RMSE from topographic maps and LiDAR were 3.49 and 2.282 meter, respectively. Further study needs to be made to decide possible use of topographic maps instead of LiDAR including more easier updating of topographic maps to support flood map generation. In addition, 1:1,000 topographic mapping, which is limited to the urban areas so far, needs to be extended to the river areas.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.10a
• /
• pp.11-26
• /
• 1997

It has knows that the seismicity of the Korean Peninsula is relatively inactive than those of adjacent northern China and southwestern Japan. Recently the review of long term historical records and recent seismicity. In addition, it is considered that the modern society is more vulnerable to seismic hazard because of high urbanization and industrialization. From this viewpoint, the improvement and modification of the present regulation for aseismic design is strongly proposed. The purpose of the present study is to prepare seismic hazard maps for Korea to be used in improving the present regulation. The present study was performed as a cooperative project of eight Korean seismologists. Each seismologist calculated independently seismic hazard value at the given grid points based on his own judgement about methodology and seismicity. Then the values are unified with equal weight to produce a seismic hazard map. Seven seismic hazard maps for peak acceleration with 10 percentile probability of exceedance in 5, 10, 20, 50, 100, 250, 500 years are presented. This probability of exceedancd in such years corresponds to return period of 48, 95, 190, 475, 950, 2373, 4747 years, respectively. It is recommended to use a hazard map to be selected on the basis of the importance and the design level of structures.