• Journal of the Korean GEO-environmental Society
• /
• v.16 no.1
• /
• pp.17-27
• /
• 2015

Recently, Korean government has tried out to set up earthquake hazards prevention system. In the system, several geotechnical hazard maps including liquefaction hazard map and landslide hazard map for the whole country have drawn to consider the domestic seismic characteristics. To draw the macro liquefaction hazard map, big data of site investigations in metropolitan areas and provincial areas has to be verified for its application. In this research, we carried out site response analyses using 522 borehole site investigation data in S city during a desirable earthquake. The soil classification was separately compared to shear wave velocity considering the uncertainty of site investigation data. Probability distribution and statistical analysis for the results of site response analyses was applied to the feasibility study. Finally, we suggest a new site amplification coefficient, hereby presented with the similar results of liquefaction hazard mapping using the calculated liquefaction potential index by the site response analyses. Above-mentioned study will be expected to help to follow research and draw liquefaction hazard map in moderate seismic region.

• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.36-51
• /
• 2000

Almost every year, Korean suffered from the repetitive natural disasters such as typhoons and floods. During last 10 years, Korea experienced annual average of $50 million property damages caused by inundation. To estabilish the flood disaster counter plan, knowledge for flood damage causes based on the field investigations of inundated area is required. The field investigations is focused on technique to document and analyze the meteorological conditions leading to torrential rains, the causes and patterns of flooding, the performance of flood control structures in affected areas, the extent damages and the effectiveness of local emergency response and recovery actions. We did comparative analysis of field investigation techniques. As a major goal of flood hazard map design, one of non structural disaster countermeasures, it was expected to reduce flood damage losses by requiring local governments to implement land-use regulation that would result in safe building practices in flood hazard areas. This requires local governments to develop flood hazard maps to assess how to manage particularly vulnerable floodplain areas. In this study we suggested a design manual and the management system of flood hazard map.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.664-667
• /
• 2004

This paper is aimed at analyzing the soil erosion hazard zone in farm land. RUSLE was used for an analysis of soil erosion amount, and for the spatial data of basin, soil erosion amount was calculated by extracting the respect topography space related factors of RUSLE using DEM, Landuse, Soil map as base map. As a result of analysis on the calculated soil erosion amount according to land use type, it was analyzed that the most soil erosion occurred in orchard area, i.e., 40.08ton/ha/yr at average. It was classified into 5 classes depending on the calculated soil erosion amount. of which Class V was decided as soil erosion hazard zone, and for this area, 72.5ha or so, $2.4\%$ of the entire farm land was assessed as erosion hazard zone.

• 한국지형공간정보학회:학술대회논문집
• /
• 2005.08a
• /
• pp.61-72
• /
• 2005

The landslide risk assessment process consists of hazard risk assessment and vulnerability analysis. landslide hazard risk is location dependent. Therefore, maps and spatial technologies such as GIS are very important components of the risk assessment process. This paper discusses the advantages of using GIS technology in the risk assessment process and illustrates the benefits through case studies of live projects undertaken. The goal of this study is to generate a map of landslide vulnerability map by analysis of static natural factors with GIS. A simple and efficient algorithm is proposed to generate a landslide potentialities map from DEM and existing maps. The categories of controlling factors for landslides, aspect of slope, soil, vegetation are defined. The weight values for landslide potentialities are calculated from AHP method. Slope and slope-direction are extracted from DEM, and soil informations are extracted from digital soil map. Also, vegetation informations are extracted from digital vegetation map. Finally, as overlaying, landslide potentialities map is made out, and it is verified with landslide place.

• Geomechanics and Engineering
• /
• v.36 no.5
• /
• pp.455-464
• /
• 2024

Seismic movements have varying effects on structures based on characteristics of local site. During an earthquake, weak soils are susceptible to damage due to amplified wave amplitudes. Soil-structure interaction issue has garnered increased attention in Türkiye, after devastating earthquakes in Kocaeli Gölcük (1999), Izmir (2020), Kahramanmaraş Pazarcık and Elbistan (2023). Consequently, liquefaction potential has been investigated in detail for different regions of Türkiye, mainly with available field test results. Çankırı, a city located close to North Anatolian Fault, is mainly built on alluvium, which is prone to liquefaction. However, no study on liquefaction hazard has been conducted thus far. In this study, groundwater level map, SPT map, and liquefaction risk map have been generated using Geographical Information System (GIS) for the Buğday Pazarı District of Çankırı province. Site investigations studies previously performed for 47 parcels (76 boreholes) were used within the scope of this study. The liquefaction assessment was conducted using Seed and Idriss's (1971) simplified method and the visualization of areas susceptible to liquefaction risk has been accomplished. The results of this study have been compared with the City Council's precautionary map which is currently in use. As a result of this study, it is recommended that minimum depth of boreholes in the region should be at least 30m and adequate number of laboratory tests particularly in liquefiable areas should be performed. Another important recommendation for the region is that detailed investigation should be performed by local authorities since findings of this study differ from currently used precautionary map.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1011-1021
• /
• 2016

This study performs the potential flood hazard analysis by applying elevation data, soil data and land use data. The susceptibility maps linked to elevation, soil and land use are combined to develop the new types of flood hazard map such as runoff production map and runoff accumulation map. For the development of the runoff production map, land use, soil thickness, permeability, soil erosion and slope data are used as runoff indices. For the runoff accumulation map, elevation, knick point and lowland analysis data are used. To derive an integrated type of flood potential hazard, a TOPSIS (The Technique for Order of Preference by Similarity to Ideal Solution) technique, which is widely applied in MCDM (Multi-Criteria Decision Making) process, is adopted. The indices applied to the runoff production and accumulation maps are considered as criteria, and the cells of analysis area are considered as alternatives for TOPSIS technique. The model is applied to Gamcheon watershed to evaluate the flood potential hazards. Validation with large scale data shows the good agreements between historical data and runoff accumulation data. The analysis procedure presented in this study will contribute to make preliminary flood hazard map for the public information and for finding flood mitigation measures in the watershed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.339-344
• /
• 2006

Slope failures are happen to natural disastrous when they occur in mountainous areas adjoining highways in Korea. The accidents associated with slope failures have increased due to rapid urbanization of mountainous areas. Therefore, Regular maintenance is essential for all slope and conducted to maintain road safety as well as road function. In this study, we take priority of making a database of risk factor of the failure of a slope before assesment and analysis. The purpose of this paper is to recommend a standard of Slope Management Information Sheet(SMIS) like as Hazard Map. The next research, we suggest to pre-estimated model of a road slope using Logistic Regression Model.

• Korean Journal of Remote Sensing
• /
• v.7 no.2
• /
• pp.165-178
• /
• 1991

A geologic hazard map has been produced in the suburbs of Seoul using GIS technology to analyse the degree of geologic hazard, particularly landslides. Topographic, geologic and soil data were incorporated in a map through GIS, which enable to interpret, analyse and predict the regional geologic hazards. Potential elements causing a landslide are slope geometry, geology, groundwater table, soil property, rainfall and vegetation etc. These elements analysed in the study area were input into GIS system through cartographic simulation to produce the regional geologic hazard map. For this work, ARC/INFO(GIS) and ERDAS(IP) system were used.

• Disaster Prevention Review
• /
• v.13 no.4
• /
• pp.160-161
• /
• 2011

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1396-1396
• /
• 2003