• Proceedings of the Korean Society of Crop Science Conference
• /
• 2000.11a
• /
• pp.28-45
• /
• 2000

It was unusual crop weather for 1998 and 1999 compared with normal in Korea. The consecutive days of the optimum ripening period for rice plant that had daily mean temperature 21-23C for 40 days after heading, increased with long anomalies in 1998-99. The air temperature during ripening period was much higher than the optimum temperature and lower sunshine hour than normal in the local adaptability tests of newly developed rice lines during those years. In response of rice cultivation to warming and cloudy weather during crop season, the yield shall be decreased. Most scientists agree that the rate of heating is accelerating and temperature change could become increasingly disruptive. Weather patterns should also become more erratic. Agrometeorologists could be analyzed yearly variations of temperature, sunshine hour and rainfall pattern focused on transient agroclimate change for last a decade. Rice agronomists could be established taking advantage of real time agricultural meteorology information system for fertilization, irrigation, pest control and harvest. Also they could be analyzed the characteristics of flowering response of the recommended and newly bred rice cultivars for suitable cropping plan such as cultural patterns and sowing or transplanting date. Rice breeders should be deeply considered introducing the characteristics of basic vegetative type of flowering response like Tonsil rices as prospective rice cultivars corresponding to global warming because of the rices needed higher temperature at ripening stage than Japonica rices, photoperiod sensitive and thermo-sensitive ecotypes

• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.79-88
• /
• 1996

The purpose of this research was to develop labor-saving cultural practices of cherry tomatoes in the deep flow technique (DFT) by omitting the process of raising seedling. Three cultivars, ‘Pepe’, ‘Pico’ and ‘Koko’ were propagated by the immediate setting of cuttings(lateral shoots) to the culture bed and by setting seedlings obtained by raising cuttings for 15 days, and grown in the standard and half - strength solution. 1. The immediate setting resulted in higher plants, larger number of leaves and larger leaf area during the early growth stage. And the harvest time was hastened by six days in the direct setting than that in the seedling setting. It was also earlier in ‘Pepe’, but not significant by different between two strengths of nutrient solution. 2. The average fruit weight was affected only by cultivars, but not by the type of cutting and the strength of nutrient solution. The highest yields were obtained from the immediate setting of ‘Pepe’ in other cultivars grown in the nutrient solution of standard strength. 3. Brix degree of treated cherry tomato juice was higher in ‘Pepe’ tomato cultured by immediate setting than others.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.90-90
• /
• 2017

Regulation of seed dormancy is important in many grains to prevent pre-harvest sprouting. To identify and understand the gene related to seed dormancy regulation, we have screened for viviparous phenotypes of rice mutant lines generated by insertion of Ds transposon in a Korean Japonica cultivar (Dongjin) background. One of the mutants, which represented viviparous phenotype, was selected for further seed dormancy regulation studies and designated dor1. The dor1 mutant has single Ds insertion in the second exon of OsDor1 gene encoding glycine-rich protein. The seeds of dor1 mutant showed a higher germination potential and reduced abscisic acid (ABA) sensitivity compared to wild type Dongjin. Over-expression of Dor1 complements the viviparous phenotype of dor1 mutant, indicating that Dor1 function in seed dormancy regulation. Subcellular localization assay of Dor1-GFP fusion protein revealed that the OsDor1 protein mainly localized to membrane and the localization of OsDOR1 was influenced by presence of a giberelin (GA) receptor OsGID1. Further bimolecular fluorescence complementation (BiFC) analysis indicated that OsDOR1 interact with OsGID1. The combined results suggested that OsDOR1 regulates seed dormancy by interacting with OsGID1 in GA response. Additionally, expression of OsDOR1 partially complemented the cold sensitivity of Escherichia coli BX04 mutant lacking four cold shock proteins, indicating that OsDOR1 possessed RNA chaperone activity.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.2
• /
• pp.133-141
• /
• 2008

Stem cells have self-renewal capacity, long-term viability, and multiline age potential. Adult bone marrow contains mesenchymal stem cells. Bone marrow-derived mesenchymal stem cells (BMSCs) are progenitors of skeletal tissue components and can differentiate into adipocytes, chondrocytes, osteoblasts, and myoblasts in vitro and undergo differentiation in vivo. However, the clinical use of BMSCs has presented problems, including pain, morbidity, and low cell number upon harvest. Recent studies have identified a putative stem cell population within the adipose tissue. Human adipose tissue contains pluripotent stem cells simillar to bone marrow-derived stem cells that can differentiate toward the osteogenic, adipogenic, myogenic, and chondrogenic lineages. Human adipose tissue-derived stem cells (ATSCs) could be proposed as an alternative source of adult bone marrow stem cells, and could be obtained in large quantities, under local anesthesia, with minimal discomfort. Human adipose tissue obtained by liposuction was processed to obtain ATSCs. In this study, we compared the osteogenic differentiation of ATSCs in a specific osteogenic induction medium with that in a non-osteogenic medium. ATSCs were incubated in an osteogenic medium for 28 days to induce osteogenesis respectively. Osteogenic differentiation was assessed by von Kossa and alkaline phosphatase staining. Expression of osteocyte specific bone sialoprotein, osteocalcin, collagen type I and alkaline phosphatase, bone morphogenic protein 2, bone morphogenic protein 6 was confirmed by RT-PCR. ATSCs incubated in the osteogenic medium were stained positively for von Kossa and alkaline phosphatase staining. Expression of osteocyte specific genes was also detected. Since this cell population can be easily identified through fluorescence microscopy, it may be an ideal source of ATSCs for further experiments on stem cell biology and tissue engineering. The present results show that ADSCs have an ability to differentiate into osteoblasts. In the present study, we extend this approach to characterize adipose tissue-derived stem cells.

• Archives of Plastic Surgery
• /
• v.47 no.4
• /
• pp.310-316
• /
• 2020

Background To produce patient-specific nasal implants, it is necessary to harvest and grow autologous cartilage. It is crucial to the proliferation and growth of these cells for scaffolds similar to the extracellular matrix to be prepared. The pore size of the scaffold is critical to cell growth and interaction. Thus, the goal of this study was to determine the optimal pore size for the growth of chondrocytes and fibroblasts. Methods Porous disc-shaped scaffolds with 100-, 200-, 300-, and 400-㎛ pores were produced using polycaprolactone (PCL). Chondrocytes and fibroblasts were cultured after seeding the scaffolds with these cells, and morphologic evaluation was performed on days 2, 14, 28, and 56 after cell seeding. On each of those days, the number of viable cells was evaluated quantitatively using an MTT assay. Results The number of cells had moderately increased by day 28. This increase was noteworthy for the 300- and 400-㎛ pore sizes for fibroblasts; otherwise, no remarkable difference was observed at any size except the 100-㎛ pore size for chondrocytes. By day 56, the number of cells was observed to increase with pore size, and the number of chondrocytes had markedly increased at the 400-㎛ pore size. The findings of the morphologic evaluation were consistent with those of the quantitative evaluation. Conclusions Experiments using disc-type PCL scaffolds showed (via both morphologic and quantitative analysis) that chondrocytes and fibroblasts proliferated most extensively at the 400-㎛ pore size in 56 days of culture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.261-266
• /
• 1984

To determine the optimum harvesting methods for high yield and quality, harvesting time were tested from 30 to 45 days after heading with five days intervals, using combine, binder and knap-sack type reaper (KSTR) in harvesting machines. Under the consideration of moisture contents of grain, operating time, grain loss, harvesting cost and quality, the optimum time of barley harvesting for mechanization was 35 to 40 days after heading. Combine and binder were recommended as the suitable machines for barley harvest in the operating efficiency and harvesting cost.

• Journal of Information Management
• /
• v.38 no.1
• /
• pp.141-160
• /
• 2007

Many contents produced and provided as development of information technology on the internet. Especially discussion that collecting and storing of digital information resources, is expanded as growing dependence on academic information of research workers. Open Access is a new paradigm of information distribution that is opposite concept of high price distribution academic information. It is an OAI system that is intended to collect and automate open access data in good order. This paper constructs stOAI based on OAI that is a science and technology information providing system. This system provides international academic journal free of charge that collect and store through OAI protocol in OA(Open Access) of yesKISTI(science and technology information portal service). Also, It provides automate and centralize science technology information, that KISTI has, to external institution as a standard type.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.2
• /
• pp.128-133
• /
• 1993

This experiment was carried out to evaluate the germination characteristics of Korean red rice seeds. Ten lines of the long grain and ten lines of the short grain Korean red rices were tested for dormancy, shoot emergence rate at different water and soil depth. Both the long and short grain type seeds of Korean red rice germinated over than 99% immediately after harvest, so that no dormancy was observed in the Korean red rices. Shoot emergence rate of the long grain red rices at 7cm of water depth and that of the short grain red rices at 11cm were 83.3% and 83.5% respectively, while those of the indica check Samgangbyeo and japonica check Seomjinbyeo were 0%. Shoot emergence rates of the long and short grain red rices at 7cm of soil depth were 71.1% and 73.9% respectively, while those of the check varieties Samgangbyeo and Seomjinbyeo were 40.0% and 28.0% respectively. Thus, the Korean red rices were expected to be useful germplasm source for direct seeding.

• Korean Journal of Plant Resources
• /
• v.3 no.1
• /
• pp.31-40
• /
• 1990

Pericarp and seedcoat removal treatments were tested to determine their effectiveness in the hard-to-germinate botanical seeds of jerusalem artichoke. Fresh seed of five Helianthus tuberosus L.varieties were (A)untreated (B)water soaked overnight (C) soaked overnight followed by renoval of pericarp or (D) soaked overnight followed by renoval of pericarp and seedcoat. The results indicate that treatments which removed the pericarp and seedcoat were the very effective, giving germination of over 90%. A considerable increase in germination did not follow only the peri-carp removal treatments. The factors inhibitory to germination of fresh jerusalem artichoke seed is associated withthe seedcoat. The removal treatment of pericarp and seed-cost is recommended despite its complexity because it givesa high germination percentage and varies least from varietyto variety. Heliarthus tuberosus L., a biomass potential crop, is a member of the family compositae. The genus Helianthushas provided man with two food plants, the sunflower (H.annus) and the jerusalem artichoke or topinambour (H. tube-rosus) . (3) The jerusalem artichoke grown for its tubers, has always been an extremely minor crop, but it is stillgrown in many places as a food for man or livestock and forthe production of alcohoL. Though tubers are used for pro-pagation jerusalem artichoke also flower and produce seedin head-like in florescences. Flowers are developed acro-petaLly on flattened receptacles such that outermost flowers are oldest. Each of these epigynous flowers may develop an achene-type fruit in which outer layers of the overy wallpersist, while inner layers become disorganized. Insidethe ovary wall of mature fruit, there is a papery seedcoat, probably composed of compact cells from endosperm, integu-ments, and nucellus.In general, the efforts to improving this crop havebeen hampered by the hard-to-germinate botanical seed.Seeds did not germinate for at least IL months after harvest.Fresh seeds of some varieties require one year more to gar-minate. (5) Since the time factor between generations isof concern in a prospective breeding program of jerusalemartichoke , these observations led to investigation of thenature of delayed seed germination in jerusalem artichokeas a biomass potential crop.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.412-415
• /
• 2015

This paper presents a MPPT(Maximum Power Point Tracking) control CMOS interface circuit for vibration energy harvesting. The proposed circuit consists of an AC-DC converter, MPPT Controller, DC-DC boost converter and PMU(Power Management Unit). The AC-DC converter rectifies the AC signals from vibration devices(PZT). MPPT controller is employed to harvest the maximum power from the PZT and increase efficiency of overall system. The DC-DC boost converter generates a boosted and regulated output at a predefined level and provides energy to load using PMU. A full-wave rectifier using active diodes is used as the AC-DC converter for high efficiency, and a schottky diode type DC-DC boost converter is used for a simple control circuitry. The proposed circuit has been designed in a 0.35um CMOS process. The chip area is $950um{\times}920um$.