• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.299-301
• /
• 2009

In this paper, a novel anti-islanding method of DC-AC single phase inverter is proposed. The inverter injects a little harmonic current with the output current of a PCS(Power Conditioning System). When the islanding condition is occurred, the voltage harmonic components appear on the output voltage of the PCS due to the injection of a little harmonic current. So, the PCS detects the voltage harmonic components using the Goertzel algorithm, and then the PCS decides that the islanding condition is occurred. When the PCS recognizes the islanding condition, the PCS are stopped. The proposed a novel anti-islanding method is analyzed, and its validity is proven through simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.1-2
• /
• 2013

In this paper, we inject input currents having $3^{rd}$ harmonic to reduce the capacitance of DC link capacitors in single-phase converters. If the input current with third harmonic is injected, the required capacitance can be reduced by minimizing the difference between the input and output power. To control the input current, instead of PI control done in rotating frame, PR controller is used with the proposed separate current control method for fundamental and $3^{rd}$ harmonic components. The validity of the proposed method has been demonstrated by simulation results.

• 해양환경안전학회지
• /
• 제18권4호
• /
• pp.360-364
• /
• 2012

전기추진시스템 분야에서 AC/DC 컨버터는 상대적으로 간단한 다이오드 소자를 이용하는 정류기가 가장 널리 사용되고 있으며 이 정류기는 입력 전류에 큰 고조파를 포함하고 있어서 고조파 저감을 위한 많은 연구가 진행되고 있다. 본 연구에서 제안된 방식은 다이오드 정류기의 출력 전류를 정류기와 추진전동기 입력측에 주입하여 정류기와 추진전동기 입력 전류에 포함되는 고조파 성분을 줄이고 또한, 와이-델타 변압기를 정류기 및 추진전동기 입력회로에 설치되는 전류주입장치의 분배회로에 사용하여 주입전류와 전원 및 부하를 서로 절연함으로써 전류파형 개선과 전기적 안전성을 확보하였다. 제안한 방법을 현재 사용 중인 전기추진선박에서 적용하여 시뮬레이션 하였으며 기존의 전력변환장치와 비교하여 그 타당성을 입증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.142-144
• /
• 2007

이 논문은 세탁기 모터 구동을 위한 단일 전류 센서 방식에서 3상 전류 복원 방법에 대한 기존 방법에 있어서의 문제점 개선 을 위하여 최소전압 주입 방식 과 Smooth 전압 주입 방식을 제시 하고 인버터에서의 전류 복원 향상을 통한 고조파 와 소음 개선 방법을 제시 하였다. 또한 제시된 방식의 타당성을 검증하기 위한 시뮬레이션 및 실험 결과를 고찰하는 것을 목적으로 한다.

• 대한전기학회논문지
• /
• 제38권5호
• /
• pp.362-369
• /
• 1989

A method to increase the output voltage of the PWM inverter within linear range is considered. A new modulation wave is used, which is made by injecting the third harmonic wave into the sinusoidal wave. The optimum region for improving the output voltage keeping the linear control characteristic is obtained by digital simulation. Furthermore, the distortion factor in the optimum region is less than that calculated when the maximum output voltage can be obtained in the sinusoidal PWM inverter.

• 조명전기설비학회논문지
• /
• 제29권9호
• /
• pp.81-88
• /
• 2015

LED has been great attentions in lighting industry because of its long life-time, high efficiency, excellent light output characteristics. However, the life-time of the LED driving system is decreased because of the electrolytic capacitor which is used in the power conversion system for driving LED lighting. Therefore the capacitance reduction methods have been studied to replace an electrolytic capacitor with film or tantalum capacitor. This paper presents the Single stage PFC flyback converter with the simplified third harmonic current injection circuit to reduce output capacitance and the proposed system is theoretically analyzed and verified through the experiment.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.20-26
• /
• 2014

To enhance torque density by harmonic current injection, optimal slot/pole combinations for five-phase permanent magnet synchronous motors (PMSM) with fractional-slot concentrated windings (FSCW) are chosen. The synchronous and the third harmonic winding factors are calculated for a series of slot/pole combinations. Two five-phase PMSM, with general FSCW (GFSCW) and modular stator FSCW (MFSCW), are analyzed and compared in detail, including the stator structures, star of slots diagrams, and MMF harmonic analysis based on the winding function theory. The analytical results are verified by finite element method, the torque characteristics and phase back-EMF are also taken into considerations. Results show that the MFSCW PMSM can produce higher average torque, while characterized by more MMF harmonic contents and larger ripple torque.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.312-319
• /
• 2014

When distributed generation such as a wind power system is connected to the grid, it should meet grid requirements like IEEE Std. 1547, which regulates the anti-islanding method. Since the islanding may cause damage on electrical equipments or safety hazards for utility line worker, a distributed generation should detect it as soon as possible. This paper proposes a hybrid anti-islanding method coupled with the active and passive detection methods. To enhance the harmonic extraction capability for an active harmonic injection method, cascaded second-order band-pass filter and signal processing scheme are employed. Simulation and experiments are carried out under the islanding test condition specified in IEEE Std. 1547. Passive over/under voltage and over/under frequency methods are combined with the active method to improve the detection speed under certain condition. The simulation and experimental results are presented to verify that the proposed hybrid anti-islanding method can effectively detect the islanding.

• 전기전자학회논문지
• /
• 제26권1호
• /
• pp.43-49
• /
• 2022

본 논문은 전동기의 저속 영역 운전의 센서리스 기법으로 적합한 고조파 주입 센서리스 제어기법에서 사인파, 삼각파 및 사각파를 주입하여 인가 전압 파형에 따른 센서리스 성능을 비교한다. 본 연구는 영구자석 전동기의 센서리스 기법에 관한 것이다. 1kHz 주파수를 갖는 여러 모양의 파형을 주입하여, 각 파형에 대한 추정된 각도의 오차량을 비교 분석한다. 실험은 HILS(hardware in the loop simulation) 시스템을 이용하였으며, Hardware는 제어보드이며 실시간 시뮬레이터에는 Simulik로 구현된 인버터와 전동기의 모델이 위치한다. 제어 알고리즘은 FPGA 제어보드로 구현하였으며, 이는 10kHz 주파수의 PWM 인터럽트 서비스 루틴, 고조파 주입 및 위치 검출 센서리스 알고리즘 등을 포함한다. HILS 실험을 통해 사인파, 삼각파 및 사각파 고조파 주입시 센서리스 제어 성능을 비교한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.291-295
• /
• 1989

The conventional Optimized Injection Method is a good control technique but can't be applied to 3-phase a.e. line. In this paper, a new technique, Time-sharing Method based on basic principle of conventional Optimized Injection Method is introduced to hold the independence of each phase, and the structure of power circuit is improved to realize the new control method. By this scheme it is possible to simplify the control circuit and power circuit. The characteristic of the new control method are investigated and compared with conventional Optimized Injection Method by computer simulation.