• 제목/요약/키워드: Harmonic injection

검색결과 97건 처리시간 0.023초

일측성 성대마비 환자에서 내전형 갑상성형술, 피열연골 내전술, 피열연골내전술과 성대주입술 병행치료의 음성 결과 비교 (Comparison of Voice Outcomes between Medialization Thyroplasty and Arytenoid Adduction with or without Injection Laryngoplasty in Unilateral Vocal Fold Paralysis Patients)

  • 진호경;원성준;최나연;손영익
    • 대한후두음성언어의학회지
    • /
    • 제28권2호
    • /
    • pp.118-122
    • /
    • 2017
  • Background and Objectives : In unilateral vocal fold paralysis (VFP), medialization thyroplasty (MT), arytenoid adduction (AA) and injection layrngoplasty (IL) are the most common procedures to correct phonatory problems. There is no consensus that which procedure is superior to the other for correcting the glottal insufficiency. The purpose of this study was to compare the phonatory parameters between MT, AA and AA with IL (AA+IL) in patients with unilateral VFP. Materials and Methods : This retrospective study enrolled patients from 2005 to 2016. Total 72 patients (49 male, 23 female, mean age 54.5 years) were classified into three groups ; MT (n=28), AA (n=12), and AA+IL (n=32). GRBAS scales, maximum phonation time (MPT), jitter, shimmer, noise to harmonic ratio (NHR), and voice handicap index (VHI)-10 and VHI-30 were preoperatively and postoperatively collected and compared between the three groups. Results : Age, gender and cause of VFP were not significantly different between the three groups. In MT and AA groups, MPT, VHI, G (overall grade) and B (breathiness) were significantly improved. In AA+IL group, jitter, shimmer, NHR, MPT, VHI, G and B were significantly improved. In analysis of differences (pre-postoperative values), ${\Delta}$ jitter (p<0.001), ${\Delta}$ shimmer (p=0.031), and ${\Delta}$ NHR (p=0.002) were significantly different and AA+IL group showed the greatest improvement. Conclusion : Analysis of voice parameters showed that all the three procedures for patients with unilateral VFP are effective in the improvement of voice ; especially in MPT, VHI-10, G and B scales. Compared to the others, AA+IL provided the better acoustic values including jitter, shimmer and NHR.

  • PDF

3차 고조파 주입에 의한 단상 PWM컨버터의 고역률 제어 (Power Factor Correction of Single-phase PWM Converter using Third Harmonic Injection)

  • 손진근;유성식;김병진;박종찬;전희종
    • 조명전기설비학회논문지
    • /
    • 제13권3호
    • /
    • pp.25-33
    • /
    • 1999
  • 본 논문에서는 다이오드 정류기와 부스트 컨버터가 결합되 단상 PWM컨버터의 역률보상 및 고조파 저감 기법에 관하여 연구하였다. 일반적인 다이오드 정류기의 경우에서는 전원 입력측에 불연속 펄스 전류가 흘러서 역률의 저하 및 고조파 왜곡이 포함되어 다른 전원계통에 악영향을 주는 문제점이 있다. 이를 해결하기 위하여 본 논문에서는 3차 고조파가 주입된 PWM 기법을 사용하여 입력전류에서의 고조파왜곡이 감소되는 AC-DC 부스트 컨버트를 제안하였다. 이때의 부스트 컨버터는 스위칭 손실 및 회로구성이 용이한 불연속적전류모드 제어방식을 채용하였다. 스위칭 주파수가 5[kHz]인 컨버터를 구성하여 컴퓨터 시뮬레이션 및 실험을 행하였으며 그 결과 역률 보상 및 전 고조파 왜곡이 감소되었음을 확인하였다.

  • PDF

3T MREIT 시스템을 이용한 실험견 사체의 두부 도전율 영상 (Conductivity Imaging of a Canine Head using a 3T MREIT System with a Carbon-Hydrogel Electrode: Postmortem Experiment)

  • 정우철;김영태;;김형중;이태휘;강병택;박희명;우응제
    • 대한의용생체공학회:의공학회지
    • /
    • 제30권2호
    • /
    • pp.179-184
    • /
    • 2009
  • Magnetic Resonance Electrical Impedance Tomography (MREIT) is a new bio-imaging modality providing cross-sectional conductivity images from measurements of internal magnetic flux densities produced by externally injected currents. Recent MREIT studies demonstrated successful conductivity image reconstructions of postmortem and in vivo canine brain. However, the whole head imaging was not achieved due to technical issues related with electrodes and noise in measured magnetic flux density data. In this study, we used a new carbon-hydrogel electrode with a large contact area and injected 30 mA imaging current through a canine head. Using a 3T MREIT system, we performed a postmortem canine experiment and produced high-resolution conductivity images of the entire canine head. Collecting magnetic flux density data inside the head subject to multiple injection currents, we reconstructed cross-sectional conductivity images using the harmonic $B_z$ algorithm. The conductivity images of the canine head show a good contrast not only inside the brain region including white and gray matter but also outside the brain region including the skull, temporalis muscle, mandible, lingualis proprius muscle, and masseter muscle.

음주에 따른 음성 변화에 대한 고찰 (Studies on Voice Changes Associated with Alcohol Intake)

  • 김정현;윤제환;조형호;조연;조재식
    • 대한후두음성언어의학회지
    • /
    • 제13권1호
    • /
    • pp.18-22
    • /
    • 2002
  • Background and Objectives : It has been pointed out that alcohol intake in human beings induces changes in voice register and maximum phonation time. These changes supposedly result from injection of the vibratory vocal folds. The purpose of this study was to clarify the voice changes associated with alcohol intake and the changes of laryngeal mucosa. Materials and Methods : The subjects included 29 volunteers, including 20 men and 9 women ranging in age from 22 to 31 years. Alcohol intake was accomplished by oral administration of 23% soju 1 bottle (255cc). Serum alcohol concentration levels were evaluated hourly for 3 h after ingestion of alcohol. Seven measurements were performed at pre-alcohol intake and post-alcohol intake hourly : fundamental frequency, jitter, shimmer, noise to harmonic ratio as the acoustic analysis, maximal phonation time, mean flow rate, and subglottal pressure as the aerodynamic analysis. The changes of laryngeal mucosa were evaluated by flexible laryngoscope at each measurement. Results : By comparing the acoustic and aerodynamic data and laryngeal mucosa before and after alcohol intake, there were not remarkable changes (p>0.05). Conclusion : The voice and laryngeal mucosa have not remarkably changed according to alcohol concentration in this study. Furthermore studies on the voice change induced by multiple alcohol concentrations are required.

  • PDF

3,300V 1MVA H-브릿지 멀티레벨 인버터 개발 (Development of 3,300V 1MVA Multilevel Inverter using Series H-Bridge Cell)

  • 박영민;김연달;이현원;이세현;서광덕
    • 전력전자학회논문지
    • /
    • 제8권6호
    • /
    • pp.478-487
    • /
    • 2003
  • 본 논문에서는 고압 대용량 전동기 구동용 멀티레벨 인버터의 종류 및 특징을 간략히 살펴보고, 특히 입출력 전력품질이 우수하고 전압별 시리즈화가 용이한 H-브릿지 멀티레벨 인버터의 구조적 특징 및 장점을 기술하였다. 연구 개발된 3,300V lMVA 용량의 Cascaded H-브릿지 멀티레벨 인버터의 구체적인 전력회로 구조 및 설계방법, 제어기 구성 그리고 PWM 기법을 제시하였다. 또한, 실용량의 시험을 통해 H-브릿지 멀티레벨 인버터는 출력 전압 Step이 여러 단계이고 dv/dt가 적으며 입력단 THD를 크게 낮출 수 있어 성능 면에서도 여타 방식보다 우수함을 입증하였다. 또한 생산적인 측면에서도 저압 소자를 사용하여 설계하므로 기존의 생산/시험 기술과 설비를 이용할 수 있어 매우 경제적이며 Power Cell 단위 결합 구조이므로 신뢰성 측면이나 보수/유지 측면에서도 유리하다는 결론을 얻었다.

The Development of a 20MW PWM Driver for Advanced Fifteen-Phase Propulsion Induction Motors

  • Sun, Chi;Ai, Sheng;Hu, Liangdeng;Chen, Yulin
    • Journal of Power Electronics
    • /
    • 제15권1호
    • /
    • pp.146-159
    • /
    • 2015
  • Since the power capacity needed for the propulsion of large ships is very large, a multiphase AC induction propulsion mode is generally adopted to meet the higher requirements of reliability, redundancy and maintainability. This paper gives a detailed description of the development of a 20MW fifteen-phase PWM driver for advanced fifteen-phase propulsion induction motors with a special third-harmonic injection in terms of the main circuit hardware, control system design, experiments, etc. The adoption of the modular design method for the main circuit hardware design can make the enclosed mechanical structure simple and maintainable. It can also avoid the larger switch stresses caused by the multiple turn on of the IGBTs in conventional large-capacity converter systems. The use of the distributed controller design method based on a high-speed fiber-optic ring net for the control system can overcome such disadvantages as the poor reliability and long maintenance times arising from the conventional centralized controller which is designed according to point-to-point communication. Finally, the performance of the 20MW PWM driver is verified by experimentation on a new fifteen-phase induction propulsion motor.

On the Design of Power Supply System for Freight Train Reefer Container Based on Simulation

  • Kim, Joouk;Hwang, Sunwoo;Lee, Jae-Bum;Hwang, Jaemin;Chae, Uri
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제14권3호
    • /
    • pp.249-257
    • /
    • 2022
  • In recent years, if we order food by easily accessing the online market with our smartphone, we can receive the product in a fresh state at dawn the next day. Cold chain is an industry that can create high added value because it has both the characteristics of general logistics and sensitivity to temperature. Based on the electrical specifications derived from the reefer container capacity requirement investigation, we proved that power supply to up to 33 reefer containers can be made by using three additional auxiliary power supplies which are applied for freight trains in Korea. In this paper, we conducted a research on a design of power supply system for freight train reefer container based on simulation as a basic research necessary for low-temperature distribution and cold chain construction based on the reefer container railroad. Consequently, the simulation was conducted using the three-phase inverter diagram in PSIM and the SVPWM (3-harmonic injection method) control technique, and it was verified that the required power voltage was satisfied with 622Vdc, which is lower than the input voltage of general SPWM of 718Vdc. The details of this paper could be used as a foundational study for constructing cold chains based on a reefer container dedicated to freight trains in the future.