• Structural Engineering and Mechanics
• /
• 제88권5호
• /
• pp.405-417
• /
• 2023

This paper reveals theoretical research to the nonlinear dynamic response and initial geometric imperfections sensitivity of the spinning graphene platelets reinforced metal foams (GPLRMF) cylindrical shell under different boundary conditions in thermal environment. For the theoretical research, with the framework of von-Karman geometric nonlinearity, the GPLRMF cylindrical shell model which involves Coriolis acceleration and centrifugal acceleration caused by spinning motion is assumed to undergo large deformations. The coupled governing equations of motion are deduced using Euler-Lagrange principle and then solved by a combination of Galerkin's technique and modified Lindstedt Poincare (MLP) model. Furthermore, the impacts of a set of parameters including spinning velocity, initial geometric imperfections, temperature variation, weight fraction of GPLs, GPLs distribution pattern, porosity distribution pattern, porosity coefficient and external excitation amplitude on the nonlinear harmonic resonances of the spinning GPLRMF cylindrical shells are presented.

• 대한원격탐사학회지
• /
• 제32권2호
• /
• pp.195-200
• /
• 2016

수증기는 다양한 규모의 대기 순환을 유도하고 온실효과의 약 60%를 설명하는 중요한 기후 변수이다 (Karl and Trenberth, 2003). 본 연구의 목적은 Terra/Aqua 위성의 Moderate Resolution Imaging Spectroradiometer (MODIS) 센서를 통해 생산된 총 가강수량 (Total Precipitable Water, TPW) 자료의 장기적인 변화를 분석하고 강수 및 기온 실측자료와의 비교를 통해 TPW의 변화가 한반도를 포함한 동아시아 지역의 기후에 미치는 영향을 정량적으로 파악하고자 하는 것이다. 따라서 본 연구에서는 TPW와 강수 및 기온과의 상관을 알아보기 위하여 선형회귀분석을 실시하였고 TPW와 강수 및 기온의 주기 변화 양상을 분석하기 위하여 조화분석을 실시하였다. 선형회귀분석 결과 TPW와 강수 및 기온과의 상관성이 높게 나타났다(TPW-기온의 결정계수 (determination coefficient, $R^2$): 0.94, TPW아노말리-기온 아노말리의 결정계수: 0.8, TPW-강수량의 결정계수: 0.73, TPW아노말리-강수량 아노말리의 결정계수: 0.69). 조화분석 결과 2년에서 5년 사이의 다년주기 성분 중에서 TPW와 강수량 모두 3.5년 주기성분에서 진폭의 기여도가 높게 나타났으며 TPW와 강수량의 3.5년 주기 성분의 위상이 유사한 시기에 나타났다.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.41-50
• /
• 1998

The detemination of sound pressure radiated from peoriodic plate structures is fundamental in the estimation of noise levels in aircraft fuselages and ship hull structures. As a robust approach to this problem, here a very general and comprehensive analytical model for predicting the sound radiated by a vibrating plate stiffened by periodically spaced orthogonal symmetric beams subjected to a sinusoidally time varying point load is developed. The plate is assumed to be infinite in extent, and the beams are considered to exert both line force and moment reactions on it. Structural damping is included in both plate and beam materials. A space harmonic series representation of the spatial variables is used in conjunction with the Fourier transform to find the sound pressure in terms of harmonic coefficients. From this theoretical model. the sound pressure levels on axis in a semi-infinite fluid (water) bounded by the plate with the variation in the locations of an external time harmonic point force on the plate can be calculated efficiently using three numerical tools such as the Gauss-Jordan method, the LU decomposition method and the IMSL numerical package.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.611-617
• /
• 2021

The mechanical properties of α-Na₃(U_0.84(2),Na_0.16(2))O₄ have been researched using the first-principles calculations combined with the quasi-harmonic Debye model. The obtained lattice parameters agree well with the published experimental data. The results of elastic constants indicate that α-Na₃(U_0.84(2),Na_0.16(2))O₄ is mechanically stable. The polycrystalline moduli are predicted. The results show that the α-Na₃(U_0.84(2),Na_0.16(2))O₄ exhibits brittleness and possesses obvious elastic anisotropy. The hardness shows that it can be considered a "soft material". Furthermore, the Debye temperature θ_D and the minimum thermal conductivity k_min are also discussed, respectively. Finally, the thermal expansion coefficient α, isobaric heat capacity C_P and isochoric heat capacity C_V are evaluated through the quasi-harmonic Debye model.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권6호
• /
• pp.309-313
• /
• 2002

In this paper, we have studied minimization of the kerf-width and surface burning, which occurred after the conventional singulation process of the multi-layer BGA board with copper, polyethylene and epoxy glass fiber. The high thermal energy of a pulsed Nd:YAG laser is used to cut the multi-layer board. The most considerable matter in the laser cutting of the multi-layer BGA boards is their different absorption coefficient to the laser beam and their different heat conductivity. The cut mechanism of a multi-layer BGA board using a 2$^{nd}$ harmonic Nd:YAG laser is the thermal vaporization by high temperature rise based on the Gaussian profile and copper melting point. In this experiment, we found that the sacrifice layer and Na blowing are effective in minimizing the surface burning by the reaction between oxygen in the air and the laser beam. In addition, N2 blowing reduces laser energy loss by debris and suppresses surface oxidation. Also, the beam incidence on the epoxy layer compared to polyimide was much more suitable to reduce damage to polyimide with copper wire for the multi layer BGA singulation. When the polyester double-sided tape is used as a sacrifice layer, surface carbonization becomes less. The SEM, non-contact 3D inspector and high-resolution microscope are used to measure cut line-width and surface morphology.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.27-37
• /
• 1997

Internal combustion engine is the main source of environmental pollutants and therefore better technology is required to reduce harmful elements from the exhaust gases all over the world. Especially, harmful elements from the exhaust gases are caused by incomplete combustion of mixture inside the engine cylinder and this abnormal combustion like misfire or partial burning is the direct cause of the air pollution and engine performance degradation. the object of this research is to detect abnormal combustion like misfire and to keep the engine performance in the optimal operating state. Development of a new system therefore could be applied to a real car. To realize this, the spark-plug in a conventional ignition system is used as a misfire detection sensor and breakdown voltage is analyzed. In this research, bias voltage(about 3kV) was applied to the electrodes of spark-plug and breakdown voltage signal is obtained. This breakdown voltage signal is analyzed and found that a combustion phenomena in engine cylinder has close relationship with harmonic coefficient K which was introduced in this research. Newly developed combustion diagnostic method( breakdown voltage signal analysis) from this research can be used for the combustion diagnostic and combustion control system in an real car.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.86-97
• /
• 1993

수치방법은 포텐셜 유동의 가정하에서 Semi-Lagrangian 기법을 사용하여 2차원 쇄기의 비선형운동과 축대칭 물체의 강제 상하동요 운동에 대해서 개발되었다. 2차원에서 Cauchy 이론은 경계를 따라서 복소포텐셜과 그것의 미분치를 계산하기 위해 적용되었고, 3차원에서 Rankinering 쏘오스가 사용되고 대수방정식을 풀기위해서 그린 제2정리를 이용하였다. 해는 완전한 사유표면 조건을 수치적분함으로서 시간전진시킨다. 수치계산 예는 정속도로 입수하는 쇄기형 주상체와 정지 상태로 부터 강제상하동요하는 문제를 택하였다. 쇄기입수 문제는 Chapman [4], Kim[11]의 계산결과와 비교된다. 위에서 적용된 기법을 이용하여 구한 시간영역에서 힘을 Fourier 변환함으로서 부가질량계수, 감쇄계수, 2차조화력등이 얻어지고 Yamashita[5]의 실험치와 비교된다.

• Macromolecular Research
• /
• 제15권3호
• /
• pp.234-237
• /
• 2007

3,4-Bis-(3,4-dicarboxyphenylcarboxyethoxy)-4'-nitrostilbene dianhydride was prepared and reacted with 4,4'-(hexafluoroisopropylidene)dianiline to yield a novel Y-type polyimide containing the 3,4-dioxynitrostilbenyl group as an NLO-chromophore, which constituted part of the polymer backbone. The resulting polyimide was soluble in polar solvents such as acetone and N,N-dimethylformamide. The polymer exhibited good thermal stability up to $370^{\circ}C$ in the thermogravimetric analysis. The glass-transition temperature ($T_g$) obtained from the differential scanning calorimetry thermogram was near to $153^{\circ}C$. The second harmonic generation (SHG) coefficient ($d_{33}$) of the poled polymer film at the fundamental wavelength of $1064\;cm^{-1}$ was around $2.15\;{\times}\;10^{-8}\;esu$ (9.01 pm/V). The dipole alignment exhibited exceptionally high thermal stability even at a temperature $30^{\circ}C$ above the $T_g$, and there was no SHG decay below $180^{\circ}C$ because of the partial main chain character of the polymer structure.

• 해양환경안전학회지
• /
• 제25권3호
• /
• pp.366-372
• /
• 2019

This study performed a numerical analysis of a 3D unsteady viscous flow in order to investigate ship motion responses running through regular waves of the platform supply vessel. The feasibility of numerical analysis was tested under the three regular wave conditions of the KRISO container ship (KCS) suggested at the 2010 Gothenburg CFD Workshop. The resulting resistance coefficient, heave motion, and pitch angle were compared with the model test of the harmonic analysis. Also, the ship motion response characteristics of the platform supply vessel were performed using the proven method of the KRISO container ship (KCS). The ship motions including the resistance coefficient, heave motion, and pitch angle according to the time series were investigated via harmonic analysis under regular waves condition of ${\lambda}/LPP=1.87$ and $H_S=0.078m$.

• 한국정보통신학회논문지
• /
• 제19권1호
• /
• pp.19-25
• /
• 2015

본 논문에서는 고조파 억제를 위한 코플래너 도파관(CPW; coplanar waveguide)급전 슬롯 안테나에 대한 설계 방법을 연구하였다. 제안된 슬롯 안테나는 고조파를 억제하기 위해 SIR(stepped impedance resonator)를 사각형 슬롯의 양끝 부분에 대칭적으로 추가하였다. SIR의 길이와 폭의 변화에 따른 입력 반사계수 특성을 분석하여 최적의 설계 변수를 도출하였다. 2.45 GHz 무선랜 대역에서 최적화된 고조파 억제 슬롯 안테나를 FR4 기판 상에 $42mm{\times}30mm$ 크기로 제작하였다. 제안된 고조파 억제 슬롯 안테나의 슬롯의 길이는 SIR의 추가로 인해 기존의 사각형 슬롯 안테나에 비해 33.3% 줄어들었다. 실험 결과, 전압 정재파비(VSWR; voltage standing wave ratio) < 2인 대역이 2.39-2.49 GHz으로 2.45 GHz 대역에서 동작하는 것을 확인하였고, 2.45 GHz에서 이득은 2.5 dBi로 측정되었다.