• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.83-90
• /
• 1997

An unbleached hardwood kraft pulp was bleached in vitro with partially purified manganese peroxidase (MnP) from the fungus Phanerochaete sordida YK-624 without the addition of MnSO$_4$ in the presence of oxalate, malonate or gluconate known as manganese chelator, When the pulp was treated without the addition of MnSO$_4$, the pulp brightness increased by about 10 points in the presence of 2 mM oxalate, but the brightness did not significantly increase in the presence of 50 mM malonate. Residual MnP activity decreased faster during the bleaching with MnP without MnSO$_4$ in the presence of malonate than in the presence of oxalate. Oxalate reduced MnO$_2$ which already existed in the pulp or was produced from $Mn^{2+}$ by oxidation with MnP and thus supplied $Mn^{2+}$ to the MnP system. Thus, bleaching of hardwood kraft pulp with MnP, using manganese originally existing in the pulp, became possible in the presence of oxalate, a good manganese chelator and reducing reagent. Properties of partially purified MnPs from liquid cultures of white rot fungi, Ganoderma sp. YK-505, Phanerochaete sordida YK-624 and Phanerochaete chrysosporium were compared. MnP from Ganoderma sp. YK-505 was superior to MnPs from P. sordida YK-624 and P. chrysosporium in stabilities against high temperature and high concentration of $H_2O$$_2$. The MnP from Ganoderma sp. YK-505 differed in pH-activity profile from other MnPs. These data suggest that MnP from Ganoderma sp. YK-505 has different structure from those of other fungi. Bleaching of hardwood kraft pulp using the MnP from ganoderma sp. YK-505 is now in progress.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.44-50
• /
• 2016

As a raw material for pulp and paper industry, Moso bamboo, Timber bamboo and Henon bamboo pulps were prepared by soda or soda-anthraquinone(Soda-AQ) pulping process. Soda-AQ pulp yields was higher in Henon bamboo (43.2%) than in Moso bamboo or Timber bamboo (32.7-39.2%), but quite lower than hardwood species. In Kappa number comparison, Henon bamboo pulp showed lower (16.6) with 50 min cooking to $170^{\circ}C$ than that of Moso bamboo (22.8) and Timber bamboo (18.9) with 90 min cooking to $170^{\circ}C$. Fiber length of Timber bamboo soda pulp had higher (1.46 mm) than that of Moso bamboo or Henon bamboo (1.18-1.36 mm). All three bamboo pulps showed longer average fiber length than commercial hardwood pulp. With higher pulp yield and lower Kappa number, Henon bamboo is better raw material for pulp than Moso bamboo and Timber bamboo.

• Korean Journal of Plant Resources
• /
• v.23 no.4
• /
• pp.368-373
• /
• 2010

Juniperus chinensis var. sargentii Henry is a short and creeping evergreen shrub which reaches about 60 cm in height and only occurs in the northeast Asia and in the top of high mountains over the Korea. The Korea Forest Service protects it strictly by law since J. chinensis var. sargentii is an eccentric plant and possibly may be exterminated soon in Korea. This study was carried out to develop the propagation technique by cutting for conservation of genetic resources of J. chinensis var. sargentii. The rooting responses of branch cuttings, obtained from hard(May) and semi-hard wood shoots (August) to four growth regulators, namely, IAA, IBA, NAA and Rooton(exceptionally powder method) applied at various concentrations(0, 100, 200, 500, 1000 and 2000 $mgL^{-1}$) were examined in mixed soil media. Rooting rate showed significant difference between cutting times, among kinds and among concentrations of growth regulators. The optimum cutting time was April to May in hardwood cutting. The application of IBA 1000 $mgL^{-1}$(rooting rate : 36.4%) was most effective in callus formation and rooting of cutting. Relatively, rooting of cutting of the control taken in May was 30.4%. Root characteristics such as number, length and diameter of root were not significantly affected by kinds and concentrations of growth regulators in hardwood cutting.

• Journal of the Korea Furniture Society
• /
• v.25 no.3
• /
• pp.233-237
• /
• 2014

The eco-friendly preservatives such as ACQ or CUAZ have been used in landscape architectural facilities these days. In this study, the decay efficacies of ACQ treatments were evaluated according to domestic veneer species, concentration of ACQ, weathering test, adhesive type, and fungus type. In case of veneer species, hinoki cypress and yellow poplar showed the highest and lowest decay resistance, respectively. And the decay resistance appeared to be greater in plywoods bonded by resorcinol resin-bonded plywood and non-weathering treated plywood than polyurethane resin-bonded plywood and weathering treated plywood.

• Journal of Wetlands Research
• /
• v.4 no.2
• /
• pp.13-22
• /
• 2002

Difference of the inset diversity and community structures between the bog Hwaeom-neup and its surrounding forest of Mt. Wonhyo-san located at Yangsan were investigated. Overall 15 orders, 87 families, 204 genera and 233 species were identified. Hydrophilic Harpalidae species were observed in small number at the bog, while the insect species representing hardwood forest were also collected at the bog. Species diversity was relatively higher at the forest (H'=4.80) than at the bog (H'=4.10). The dominant species was Diplous depressus (Gebler) both at bog as well as at forest. Ground-walking Coleoptera as Carabus sternbergi stembergi Roeschke, Damaster jankowskii jankowskii (Oberthur) and D. depressus was spread from forest into bog. Longhorn beetles Leptura arcuata Panzer and Chlorophorus diadema (Motschulsky) being characteristic species of shrub forest were also observed spreading into bog. It was consequently suggested that the bog was in part progressed into dry succession and its boundary was not clearly defined with forest at least upon the structure of insect commnunity.

• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.91-101
• /
• 2006

This study was conducted to analyze the relationships between distributions of major hardwood species and characteristics of topography in natural hardwood forest at Mt. Joongwang, Pyongchang-gun, Gangwon-do which belongs to mid-northern part of the temperate forest. Acer pictum var. mono, Acer manshuricum and Quercus mongolica were affected by elevation, while Ulmus davidiana var. japonica and Fraxinus rhynchophylla were affected by the change of slope. Importance values of A. pictum, Betula costata, Ulmus laciniata and Cornus controversa in valley were 13.41%, 5.68% and 3.29%, respectively, which were higher than in any other topography. Species diversity of valley was the highest with 0.98. Ratio of A. pictum and Q. mongolica in dominant species were 24% and 14%, respectively in valley, while were 19% and 23% in slop. Q. mongolica ratio in ridgeline was higher than any other species. Importance values of A. pictum increased continuously until elevation 1,200 m. importance values of F. rhynchophylla was 6.6% which was the highest value found on elevation 800 m. Distributions of major hardwood species were different according to the elevation. The ratio of Q. mongolica and A. pictum were 6.4%~17.5% and 6.0%~10.7% respectively, which were the highest ratio. Species diversity increased according to the increase of the elevation.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.54-61
• /
• 2010

This study was carried out to identify the differences of some macro and microanatomical features between Eunsasi poplar (Populus tomentiglandulosa T. Lee) and Konara oak (Quercus serrata Thunb.). Anatomical features such as vessel and fiber diameter, cross sectional area of ray parenchyma and endwall pit aperture diameter in ray parenchyma were compared. Differences of anatomical features between two species were found statistically significant. Earlywood vessel diameter in poplar and oak increased from pith to bark while it was found almost stable in latewood. Fiber diameter in poplar was higher than oak fiber. Ray area and the pit aperture diameter in endwall of ray parenchyma were found higher in oak than those in poplar.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.31-42
• /
• 2007

To investigate the pyrolytic and anatomical characteristics of Korean softwood, Pinus densi-flora, Pinus rigida and Larix leptolepis, and hardwood, Acer palntatum, Fraxinus rhynchophylla and Quercus variabilis, chemical components analysis, TG-DTA (Thermogravimetric Analysis & Differential Thermal Analysis), MBA (Methylene Blue Adsorption) test and SEM observation were carried out. For TG-DTA, samples were carbonized up to $800^{\circ}C$ at the heating rate of $10^{\circ}C$/min under $N_2$ flows 1 l/min using thermogravimetric analyzer. Chemical component analysis of all samples resulted in typical contents of major wood component. In TG-DTA results, softwood showed higher char yield than hardwood, and lignin displayed the highest char yield among the major wood components. All samples showed typical TGA, DTG and DTA curves for wood pyrolysis except a few differences between softwood and hardwood. Content of lignin influenced its pyrolysis characteristics, while molecular structure of lignin affected not only the weight loss but also the yield of char. In MBA test results, MBA of softwoods was higher than that of hardwoods. Char of Pinus densiflora showed the highest MBA, but its degree was lower than activated carbon or fine charcoal about 23 and 4 times, respectively. SEM observation showed carbonization process preserves wood structure and retain the micro-structure of wood fibers.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.185-197
• /
• 2000

This study was carried out to research structure of forest vegetation and site condition, and supply basic data for conservation of pine forest and ecologically sustainable forest management and control in Anmyondo area. The forest of Anmyondo were largely classified as four forest community : Pinus densiflora community, Pinus thunbergii community, Pinus rigida community, and Quercus variabilis community. Organic matter, total nitrogen, and other nutrients in soil of the study area were relatively low, and average soil pH was 4.9. Soil texture was sandy clay or heavy clay and so the aeration and permeability could be poor. In this study site, the methods such as the promotion of germination of pine seeds through removal of forest floor and inducement of natural regeneration through such method as regeneration under shelter wood would be better than the method such as afforestation after clear-cutting for conservation the pine forests. Also, it will be a good method to practice tending for hardwood species in the dominant areas by hardwood species.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.530-536
• /
• 2006

Hardwood cutting propagation and early growth characteristics were investigated in order to develop the method of cutting propagation and to find out growth characteristics in the low altitude for in situ and ex situ conservation of Empetrum nigrum var. japonicum K. Koch, which is typical arctic alpine plants on Mt. Halla. The growth of roots and shoots was different depending on hormone concentrations or soil conditions. The survival rate, rooting rate, root growth, number of root and shoot growth increased with treatment of 100 mg/l or 500 mg/l NAA. Consequently, optimum condition of hardwood cutting was at treatment with 100 mg/l or 500 mg/l NAA. When plantlets from hardwood cuttings were exposed to the field condition, after 7 months survival rate was 73.3% without shading while $91.1{\sim}94.4%$ at shading conditions. In the green house, however, survival rate of plantlets were $95.6{\sim}97.8%$ without shading. The growth of plantlets was different depending on sites and shading conditions. Particularly, the best growth was obtained when the plantlets were grown in shading conditions. It indicates that relative humidity and light intensity are correlated with the growth in the low altitude area.