• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.209-210
• /
• 2016

프로토타입 컨버터 구현 시 전압/전류 제어기의 안정성, 제어 알고리즘, 정상적인 게이트 전압 제어가 보장되지 않은 경우 이를 수정하기 위해 사용하는 기존의 Trial and Error 방식은 조정에 많은 시간 및 비용이 소모된다. 본 논문은 이러한 시간적 비용 저감을 위하여 Control Hardware-in-the-Loop Simulation(CHILS)를 이용하여 제어기의 정상 동작 여부와 성능을 실시간으로 검증하는 방법을 제안한다. 이를 위해 LLC 공진형 컨버터를 CHILS로 구현하여, 개발된 DSP 제어기의 성능을 검증하고자 한다. 제안된 실시간 모의시험에서는 LLC 공진형 컨버터를 Matlab/Simulink에서 모델링 하여, 실제 DSP 제어기의 신호를 컨버터 모델에서 입력받아 모의시험장치의 출력 결과를 관찰함으로써 제어기의 동작 특성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.339-340
• /
• 2015

본 논문에서는 HVDC 제어 시스템의 기능 검증을 위해 구축한 RTDS 기반의 HILS(Hardware-In-the Loop Simulation)시스템 및 시험 결과를 소개하였다. MMC 기반 VSC HVDC는 다수의 직렬 연결된 SM(Sub-Module)을 개별 제어해야 하므로 기존의 LCC HVDC 및 2/3-Level 컨버터 기반의 VSC HVDC와 같은 설비들보다 훨씬 더 복잡한 VBE 구조를 가지고 있다. 또한 짧은 시간 내에 정밀한 제어가 가능해야 하므로 높은 제어 정밀도가 요구된다. (주)효성에서는 제어 시스템의 성능 검증을 위해 RTDS 기반의 HILS(Hardware-In-the Loop Simulation)시스템을 구축하였으며, 이를 이용하여 HVDC 제어 시스템의 성능 시험을 수행하였다. 본 논문에서는 구축된 RTDS 기반의 HILS 시스템 및 시험 결과를 소개하였다.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.435-440
• /
• 2013

In this paper, a design method of the simulation program for HILS(Hardware-In-the-Loop Simulation) system is proposed. The present method consists of definition of requirements for HILS, development of specifications, and implementation of the program to satisfy the specifications. In the implementation of the program, the application of hardware interface and the concept of structural modularization are proposed to satisfy the specifications. The concepts of CSCI(Computer Software Configuration Item) and encapsulation are used for structural modularization. The proposed method was practically applied to the development of the simulation program for the efficient operation in HILS of an anti-ship missile system.

• Journal of Astronomy and Space Sciences
• /
• 제26권1호
• /
• pp.99-110
• /
• 2009

이 연구의 목적은 편대비행위성의 항법 및 궤도제어를 위한 실시간 Hardware-In-the-Loop(HIL) 시뮬레이션 테스트베드를 개발하는데 있다. HIL 시뮬레이션 테스트베드는 실제와 비슷한 하드웨어 환경을 구성하여 주어진 편대비행임무 요구조건에 따른 새로운 개념의 알고리즘을 테스트할 수 있는 시뮬레이터이다. HIL 시뮬레이션 테스트베드는 실제의 인공위성 시스템 인터페이스와 최대한 유사하게 설계되었으며 환경 컴퓨터, GPS 시뮬레이터, GPS 수신기, 비행제어 컴퓨터, 시각화 컴퓨터 등 총 5개의 독립적인 시스템으로 구성되어 있다. Spirent Communication사의 GSS6560 다중패널 RF 시뮬레이터와, (주)세트렉아이에서 제작한 우주용 GPS 수신기를 사용하여 실제와 유사한 GPS 관측데이터를 사용한다. GPS 수신기로부터 획득한 관측데이터는 비행제어 컴퓨터 시스템으로 전송되고 이를 통해 편대비행위성의 절대위치 및 상대위치결정을 수행하였다. 또한 이 결과를 바탕으로 비행제어 컴퓨터 시스템은 궤도조정에 필요한 제어값을 계산하여 환경 컴퓨터 시스템으로 전송한다. 이렇게 5개의 독립적인 시스템을 유기적으로 통합하여 폐순환반복(closed-loop) HIL 시뮬레이션 테스트베드를 설계하였다. 이 논문에서는 편대비행 위성의 항법 및 제어 알고리즘 테스트를 위한 실시간 HIL 시뮬레이션 테스트베드의 전반적인 구성방법과 세부적인 구성요소에 대해 설명하였다 저궤도 편대비행위성의 편대유지 임무에 대한 가상의 시나리오를 설정하여 위성 편대비행의 항법 및 궤도제어 알고리즘을 실험적으로 검증하였다.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.181-188
• /
• 2011

A simulation technique, which simulate dynamic motion and communication environments of ship in the lab, is needed in order to reduce the testing cost when we evaluate the transfer alignment performance of shipboard INS. Hardware-In-the-Loop Simulation(HILS) can be used as an effective test method for those system because it can provide flexible and realistic simulation environments, various test scenario, and repeated test environment in the lab without additional cost and person. This paper presents the methods for implementing the real time HILS environment for testing transfer alignment performance of shipboard INS. It includes real time executive for controlling realtime simulation and calculating the ship motion, communication method for interfacing between the systems, and coordinate transformation method for converting real ship coordinate attitude data to lab coordinate attitude data.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.201-208
• /
• 2004

Response characteristics of the CVT system for a parallel hybrid electric vehicle (HEV) are investigated. From the experiment, CVT ratio control algorithm for the optimal engine operation is obtained. To investigate the effect of the CVT system dynamic characteristics on the HEV performance, a hardware in the loop simulation (HILS) is performed. In the HILS, hardwares of the CVT belt-pulley and hydraulic control valves are used. It is found that the engine performance by the open loop CVT ratio control shows some deviation from the OOL in spite of the RCVs open loop control ability. To improve the engine performance, a closed loop control of the CVT ratio is proposed with variable control gains depending on the shift direction and the CVT speed ratio range by considering the nonlinear characteristics of the RCV and CVT belt-pulley dynamics. The HILS results show that the engine performance is improved by the closed loop control showing the operation trajectory close to the OOL.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1334-1337
• /
• 1997

A spacecraft attitude control ground hardware simulator development is discussed in the paper. The simulator is called KT/KARI HILSSAT(Hardware-In-the Loop Simulator Single Axis Testbed), and the main structure consists of a single axis bearing and a satellite main body model on the bearing. The single axis tabel as ans experimental hardware simulator that evaluates performance and applicability of a satellite before evolving and/or confirming a mew or and old control logic used in the KOREASAT is developed. Attitude control of spaceraft by using reaction wheel is performed.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.688-694
• /
• 2021

The aim of this work is the analysis, design and hardware implementation of the fractional-order point kinetics (FNPK) model along with its closed-loop controller. The stability and closed-loop control of FNPK models are critical issues. The closed-loop stability of the controller-plant structure is established. Further, the designed PI/PD controllers are implemented in real-time on a DSP processor. The simulation and real-time hardware studies confirm that the designed PI/PD controllers result in a damped stable closed-loop response.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.203-209
• /
• 2007

As the vehicle electronic control technology quickly grows and becomes more sophisticated, a more efficient means than the traditional in-vehicle driving test is required for the design, testing, and tuning of electronic control units (ECU). For this purpose, the hardware-in-the-loop simulation (HILS) scheme is very promising, since significant portions of actual driving test procedures can be replaced by HIL simulation. The HILS incorporates hardware components in the numerical simulation environment, and this yields results with better credibility than pure numerical simulations can offer. In this study, a HILS system has been developed for ESP (Electronic Stability Program) ECUs. The system consists of the hardware component, which that includes the hydraulic brake mechanism and an ESP ECU, the software component, which virtually implements vehicle dynamics with visualization, and the interface component, which links these two parts together. The validity of HIL simulation is largely contingent upon the accuracy of the vehicle model. To account for this, the HILS system in this research used the commercial software CarSim to generate a detailed full vehicle model, and its parameters were set by using design data, SPMD (Suspension Parameter Measurement Device) data, and data from actual vehicle tests. Using the developed HILS system, performance of a commercial ESP ECU was evaluated for a virtual vehicle under various driving conditions. This HILS system, with its reliability, will be used in various applications that include durability testing, benchmarking and comparison of commercial ECUs, and detection of fault and malfunction of ESP ECUs.

• 한국정밀공학회지
• /
• 제32권5호
• /
• pp.447-454
• /
• 2015

Design and application of hardware-in-the-loop simulation (HILS) for design of CNC-controlled machine tool feed drives is discussed. The CNC machine tool is a complex mechatronics system where the complexity results from the software-based controller composed of a variety of functionalities and advanced control algorithms. Therefore, using a real CNC controller in the control simulation has merits considering the efforts and accuracy of the simulation modeling. In this paper challenges in HILS for a CNC controlled feed drive, such as minimization of time delay and transmission error that are caused by discretization of the feed drive model, is elaborated. Using an experimental HILS setup of a machine tool feed drive applications in controller gain selection and CNC diagnostics are presented.