• 보존과학회지
• /
• 제34권2호
• /
• pp.97-106
• /
• 2018

회곽묘는 조선시대의 대표적인 묘제로서 당시 사회와 장례문화 이해에 중요한 자료이다. 궁리유적에서 발굴한 회곽묘를 제작방식에 따라 분류하여 초음파속도와 반발경도 측정을 통해 물성을 평가하였다. 층벽식으로 제작한 회곽묘의 강도는 측정방법에 따라 차이가 있다. 초음파속도와 반발경도를 통해 산출한 층벽식 회곽묘의 압축강도는 각각 4.0~355(평균 43.6) $kgf/cm^2$ 및 18.8~538(평균 245.2) $kgf/cm^2$의 범위를 보였다. 이 회곽묘는 발굴과 이장과정에서 벽체에 충격이 발생한 상태로, 벽체의 고유물성에 비해 낮은 초음파속도가 산출된 것으로 보인다. 반면 통벽식으로 제작한 회곽묘의 압축강도는 초음파속도 및 반발경도 측정방법에 따라 각각 5.7~793(평균 281.6) $kgf/cm^2$와 4.5~551(평균 172.4) $kgf/cm^2$로 나타났다. 이처럼 압축강도 값의 차이는 있지만 경향성이 유사한 것으로 보아, 초음파속도와 반발경도 측정을 통한 물성평가는 통벽식 회곽묘에서 더욱 효과적인 것으로 판단된다. 또한 측정면적이 작은 반발경도법이 초음파법보다 더욱 일정한 강도를 보였다.

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.359-364
• /
• 2008

To satisfy the demand of higher cutting performance, mechanical properties with tungsten carbide (WC-Co) tool materials were investigated. Hardness and transverse rupture strength with WC grain size, Co content and density were measured. Compared to H, K, and S manufacture maker as tungsten carbide (WC-Co) tool materials were used for high-speed machining of end-milling operation. The three tungsten carbide (WC-Co) tool materials were evaluated by cutting of STD 11 cold-worked die steel (HRC25) under high-speed cutting condition. Also, tool life was obtained from measuring flank wear by CCD wear measuring system. Tool dynamometer was used to measure cutting force. The cutting force and tool wear are discussed along with tool material characteristics. Consequently, the end-mill of K, H manufacture maker showed higher wear-resistance due to its higher hardness, while the S maker endmill tool showed better performance for high metal removal.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.382-385
• /
• 2011

There is an immense need to obtain nanometric surface finish on optical glass owing to the advantage of improved performance of the components. But owing to brittleness and hardness, optical glass is one of the materials that is difficult to ultra-precision turning. According to the hypothesis of ductile mode machining, regardless of their hardness and brittleness, will undergo a transition from brittle to ductile machining region below a critical undeformed chip thickness. Below this threshold, it is suggested that the energy required for plastic formation. Thus, plastic deformation is the predominant mechanism of material removal in machining these materials in this mode. An experimental study is conducted diamond cutting for machining BK7 glass. The investigation presents the feasibility of achieving nanometric surface and the understanding the mechanism of cutting glass, proving the cutting edge radius effect.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.516-521
• /
• 2002

A study was carried out to grow an understanding of the microstructural development of friction stir welds on an AZ91D magnesium alloy, and to evaluate the mechanical properties of the welds. AZ91D plates with the thickness of 4mm were used, and the microstructural development of the weld zone was investigated using optical and scanning electron microscopes. Square butt welding joint with good quality was obtained at the conditions of under 187mm/min of travel speed with 1100 to 1250 rpm of tool rotation speed. The microstructure within the weld region consisted of fine equiaxed grains with no evidence of the original dendritic structure. The hardness tests showed slightly increased harness in the weld region, and the minimum hardness measured is in that of the parent material. Tensile strength of the weld zone was remarkably improved due to very fine recrystallized structure. XRD pattern of weld zone revealed the removal of $\beta$ intermetallic compounds, $Mg_{17}$Al$_{12}$, which had been distributed in the base metal.l.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.35-42
• /
• 2004

At the large-sized mold fer injection molding, the remaining gas in the mold causes some problems with final products. In order to solve these problems, air-bent was drilled on the surface of mold. However, this method leaves the scar on the surface of a product. Therefore, porous material was developed to the removal of remaining gas in this study. Porcerax II, which is a commercialized porous material, were developed in USA. It requires the electric discharge machining(EDM) process to make pores on the surface of the materials. The electric discharge machining (EDM) process, however, cause the increase of the time and cost for the fabrication of the mold. In this study, high speed machining(HSM) process was applied to the fabrication of porous mold without electric discharge machining(EDM) process. Some characteristics of the developed materials machined by high speed machining(HSM) and electric discharge machining(EDM) including air-permeability and porosity were compared with those of Porcerax II. Besides, in order to be applied to the molding process, hardness and tensile ＆ yield strength were compared between Porcerax II and developed materials.

• 한국유기농업학회지
• /
• 제22권4호
• /
• pp.657-665
• /
• 2014

토마토 억제 재배 시 생산비를 절감하고 토마토의 수확시기를 앞당기며 잦은 경운에 의한 토양환경을 보호하고자 가지대목(EG203)을 활용한 딸기후작 토마토 무경운 재배법 연구를 실시하였다. 가지대목(EG203)을 사용하여 토마토 재배를 실시한 결과 풋마름병 발생은 무경운 재배에서 실생은 30%, 가지대목(EG203)은 0%였으며 경운 재배에서는 실생은 25%, 가지대목(EG203)은 0%였다. 가지대목(EG203)을 이용한 경운 및 무경운 재배에서 상품수량은 각각 2,693, 2,657 kg/10a로 유사하였으며 당도 및 경도도 차이를 보이지는 않았다. 따라서 딸기 후작 토마토 재배에서 풋마름병에 대한 안전성을 높이기 위해 가지대목(EG203)을 활용하여 접목을 실시하여야하며 가지대목(EG203)을 이용하여 재배할 경우는 경운과 무경운 재배의 차이가 나타나지 않으므로 경제성 및 환경적으로 무경운 재배가 유리할 것으로 판단된다. 토마토 정식 당일, 10, 20, 30일 후 전작물인 딸기를 제거한 결과 20, 30일 후 제거에서 초장과 절간장은 길었으나 다른 생육에서는 차이를 보이지 않았다. 상품수량은 정식 당일 제거한 것이 1,885 kg/10a로 30일 후 제거 1,678 kg/10a보다 12% 많았으나 전작물인 딸기의 제거 시기는 딸기의 생육과 가격을 토마토의 기대소득과 비교 경제성을 분석하여 결정하여야 할 것으로 생각된다.

• 상하수도학회지
• /
• 제11권1호
• /
• pp.81-87
• /
• 1997

Coagulation is very important process in water works. The subsequent processes are directly affected by this process. Many factors such as turbidity, alkalinity, pH, hardness, total organic carbon(TOC), velocity gradient and flocculation time effect on coagulation process. Among these factors, specially TOC is being concerned target substance to be removed due to trihalomenthanes(THMs) precursor and alkalinity is being one of the major parameter for removing TOC. We have researched the consumption of coagulant with TOC alkalinity concentration of water and removal efficiency of residual TOC and turbidity with alkalinity. Furthermore we have investigated particle size distributions with velocity gradient and alkalinity. The consumption of coagulant was proportionally increased to TOC and alkalinity concentration and the removal of TOC in Nakdong river water was very difficult more than 150 mg/l in alkalinity but large morecular weight organic such as humic acid could be removed easily. Coagulation of low alkalinity water was more rapidly occured than of high alkalinity water by analyzing the particle size distributions. High alkalinity water needed higher mixing energy for a good coagulation within limited flocculation time.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.473-479
• /
• 2018

Highly toxic gases such as hydrogen sulfide ($H_2S$), carbon dioxide ($CO_2$), and ammonia ($NH_3$) are generated by both nature and human activities and affect human health. In this research, activated carbon combined with $Ca(OH)_2$ and $CaCO_3$ (AC-CO and AC-CC, respectively) were fabricated and applied in absorbing toxic gases from air pollutants. Activated charcoal powder was compressed in the form of pellets and used in the designated conditions. The optimum operating conditions and material properties, such as adsorption capacity, effect of weight ratio of the mixture, and hardness, have been investigated after combining with the calcium derivative. The good performance exhibited in this study suggests that this material is expected to be an effective and economically viable adsorbent for $NH_3$, $CO_2$, and $H_2S$ removal from the air system.

• Applied Biological Chemistry
• /
• 제19권2호
• /
• pp.93-98
• /
• 1976

경북지방(慶北地方)에서 생산(生産)되는 청도반시와 사곡시의 탈삽조건(脫澁條件)을 구명(究明)하고 탈삽중(脫澁中) 전당(全糖), 환원당(還元糖) 및 경도변화(硬度變化)를 조사(詞査)한 과과(果果)과는 다음과 같다. 1) 탈삽경과중(脫澁經過中) tannin변화(變化)는 탄산(炭酸)가스농도(濃度)가 높을수록 감소(減少)가 급격(急激)히 일어났으며 낮을수록 완만하였다. 2) 산소농도(酸素濃度)가 탈삽(脫澁)에 미치는 영향(影響)에 있어서, 청도반시는 탄산(炭酸)가스농도(濃度)가 높을 때는 큰 영향(影響)이 없었으며 저농도(低濃度)일 때는 영향이 있었는데 특(特)히 사곡시에서는 현저(顯著)한 영향이 있었다. 3) 청도반시 및 사곡시의 탈삽(脫澁)에 있어서 적정(適正)가스농도(濃度)는 탄산(炭酸)가스 $60{\sim}70%$, 산소(酸素) $6{\sim}8%$이었으며 탈삽(脫澁) 소요일수(所要日數)가 청도반시 3일 사곡시는 4일이 소요(所要)되었다. 4) 탈삽경과중(脫澁經過中) 전당(全糖)의 변화(變化)는 두 품종(品種) 모두 탄산(炭酸)가스 농도(濃度)에 관계(關係)없이 완만(緩慢)히 감소(減少)하였으며, 산소농도별(酸素濃度別)로는 산소농도(酸素濃度)가 낮을수록 감소(減少)가 심하였다. 5) 탈삽경과중(脫澁經過中) 환원당(還元糖)의 변화(變化)는 품종(品種)에 관계(關係)없이 증가(增加)하였으며 탄산(炭酸)가스농도(濃度)가 높을수록 증가(增加)되었다.

• Tribology and Lubricants
• /
• 제39권2호
• /
• pp.72-75
• /
• 2023

Silicon carbide (SiC) is used as a substrate material for power semiconductors; however, SiC chemical mechanical polishing (CMP) requires considerable time owing to its chemical stability and high hardness. Therefore, researchers are attempting to increase the material removal rate (MRR) of SiC CMP using various methods. Mixed-abrasive CMP (MAS CMP) is one method of increasing the material removal efficiency of CMP by mixing two or more particles. The aim of this research is to study the mathematical modeling of the MRR of MAS CMP of SiC with SiO₂ and TiO₂ particles. With a total particle concentration of 32 wt, using 80-nm SiO₂ particles and 25-nm TiO₂ particles maximizes the MRR at 8 wt of the TiO₂ particle concentration. In the case of 5 nm TiO₂ particles, the MRR tends to increase with an increase in TiO₂ concentration. In the case of particle size 10-25 nm TiO₂, as the particle concentration increases, the MRR increases to a certain level and then decreases again. TiO₂ particles of 25 nm or more continuously decreased MRR as the particle concentration increased. In the model proposed in this study, the MRR of MAS CMP of SiC increases linearly with changes in pressure and relative speed, which shows the same result as the Preston's equation. These results can contribute to the future design of MAS; however, the model needs to be verified and improved in future experiments.