• Journal of the Korean Home Economics Association
• /
• v.23 no.3
• /
• pp.63-73
• /
• 1985

This study was conducted to investigate the effects of fermentation time and the proportion of wheat flour to rice flour on Jeung-Pyun's texture. Textural characteristics were examined through sensory Evaluation and Instron Universal testing machine. The properties examined through sensory evaluation were grain, softness, sourness, chewiness and overall quality. Wigh Instron, hardness, cohesivenessm elasticity, gumminess and chewiness were measured. RESULTS : 1. Sensory evaluation data indicated that Jeung-Pyun containing 25% wheat flour and fermented 2 hrs were obtained higher scores than any other Jeug-Pyuns in the grain, softness and overall quality. 2. pHs of Jeung-pyundough and Jeung-Pyun containing 100% rice flour were lower than pHs of those with wheat flour added. 3. Volume of Jeung-Pyun increased as the proportion of wheat flour to rice flour and the length of fermentation time increased. 4. Instron measurement indicated that the hardness of Jeung-Pyun with 50% wheat flour added and 2hrs fermentation time was higher than of others.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.238-239
• /
• 2019

In this study, it was intended to confirm the possibility of using the Durometer in estimating the setting time by comparing the Proctor penetration resistance with the Durometer type A of hardness in concrete substituting CBS Dust. With the hardness of Durometer type A, it is expected to be used conveniently in the field of practice as it is determined to be about 18 HD for the initial determination and 31 HD for the end measurement.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.138-143
• /
• 2004

Recently there has been a great world-wide interest in developing and characterizing new nano-structured materials. These newly developed materials are often prepared in limited quantities and shapes unsuitable for the extensive mechanical testing. The development of depth sensing indentation methods have introduced the advantage of load and depth measurement during the indentation cycle. In the present work, ZnO thin films are prepared on Si(111), Si(100) substrates at different temperatures by pulsed laser deposition(PLD) method. Because the potential energy in c-axis is low, the films always show c-axis orientation at the optimized conditions in spite of the different substrates. Thin films are investigated by X-ray diffractometer and Nano indentation equipment. From these measurements it is possible to get elastic modulus and hardness of ZnO thin films on Si substrates.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.642-648
• /
• 2008

In order to analyze the causes of fossil power plant facilities due to a degradation and corrosion, artificial degraded materials composed of the facilities were manufactured. Various experiment were performed based on mechanical test, microstructure observation, hardness test, electrochemical potentiokinetic reactivation test(EPR) and corrosion scale thickness measurement test. The master curves were write out using Larson-Miller parameter to evaluate the degree of degradation with the above diagnosis methods. These data were applied to materials database of fossil power plant diagnosis. Finally expert system on the fossil power plant diagnosis was developed using the master curves and diagnosis algorithms.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.27-35
• /
• 2001

For the purpose of healing the degradation part, $CO_2$ laser beam was irradiated with different irradiation condition (porer, diameter, velocity and beam type) to find out optimum irradiation condition. The test series of hardness, residual stress measurement, and fatigue were carried out after the irradiation. Experimental results show that micro-hardness values on the surface of the irradiated specimens m approximately 2.5 times higher than those of un-irradiated ones. Fatigue tests show that the fatigue life was improved by the compressive residual stress after laser beam irradiation. However, some specimens with different conditions show the shorter fatigue life. It means that laser beam irradiation with optimum irradiation condition and optimum absorb energy, Q can improve the fatigue strength.

• Korean journal of food and cookery science
• /
• v.21 no.4 s.88
• /
• pp.528-535
• /
• 2005

This paper aims to compare and evaluate the quality of beef jerky made with Korean beef meat, Korean beef cattle and imported beef meat from Australia and New Zealand through sensory evaluation, measurement of hardness, thickness and contents of the moisture and crude lipid, and microscopic texture observation (SEM). According to the sensory evaluation, beef jerky made with Korean beef meat recorded the highest score in overall acceptability; New Zealand beef meat, the lowest. The preference of beef jerky made with Korean beef meat was shown in the appearance, smell, and texture, and especially in the taste. Whereas Korean beef jerky scored highest in color, glaze and palatability, New Zealand beef meat showed the lowest score. Korean beef meat showed the lowest in hardness, but New Zealand beef meat showed the highest as shown in the result of technical evaluation through rheometer. The evaluation through colormeter concluded that New Zealand beef meat had the highest scores in L and a values, but that Korean beef meat showed the lowest score. When it comes to the color difference compared with Korean beef meat, New Zealand beef meat showed the biggest difference. Although the moisture contents of jerky made with different beef meat showed little difference, the content of the crude lipid of jerky made with Korean beef meat and Australian beef meat was lower than that of Korean beef cattle and New Zealand beef meat. When the beef jerky is dry, fat contained in the beef meat is dissolved, which causes the glaze on the outside. Scanning electron micrographs showed that Korean and Australian beef jerky had larger gaps than Korean beef cattle and New Zealand beef jerky. It was concluded that this affected the hardness of beef jerky.

• Journal of Welding and Joining
• /
• v.28 no.1
• /
• pp.66-71
• /
• 2010

With large specific strength and outstanding corrosion resistance and erosion resistance in sea water, titanium and titanium alloy are widely used in heat exchanger production. In particular, pure titanium demonstrates outstanding molding performance and may be considered optimal for production of heat exchanger. Since titanium is very vulnerable to oxidation and embrittlement during welding, processes with less heat input are widely used, and laser welding is widely applied by considering production performance and shield etc in atmosphere. So far, 1st report and 2nd report compared and analyzed embrittlement degrees by bead colors of weldment through oxygen and nitrogen quantitative analysis and hardness measurement, and evaluated welding performance and mechanical properties of butt welding. This study evaluated field applicability of lap welding to heat exchange plate of LPG re-liquefaction device for ships through tensile stress test, hardness test and internal pressure test etc after deducing optimal weding condition and applying to actual heat exchange plate. In bead overlap area, the experiment produced sound welds with no porosity or defect by increasing and decreasing laser power, and tensile-shear test results indicated virtually the same tension and yield strength as base metal. As a result of measuring hardness at lateral cross section and bead overlap zone of actual heat exchanger welds, hardness difference within 20Hv was produced at base metal, HAZ and weldment, and as a result of pneumatic and hydraulic pressure test, no leakage occurred.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1104-1105
• /
• 2006

Several boride sintered bodies such as $TiB_2$, $ZrB_2$, and $SiB_6$ were previously reported. In the present study, the sinterability and physical properties of chromium boride $(CrB_2)$ containing chromium carbide $(Cr_3C_2)$ sintered bodies were investigated in order to determine its new advanced material. The samples were sintered at desired temperature for 1 hour in vacuum under a pressure by hot pressing. The relative density of sintered bodies was measured by Archimedes' method. The relative densities of $CrB_2$ addition of 0, 5, 10, 15 and 20 mass% $Cr_3C_2$ composites were 92 to 95%. The Vickers hardness of the $CrB_2$ with 10 and 15 mass% $Cr_3C_2$ composites were about 14 and 15 GPa at room temperature, respectively. The Vickers hardness at high temperature of the $CrB_2$ addition of 10 mass% $Cr_3C_2$ composite decreased with increasing measurement temperature. The Vickers hardness at 1273 K of the sample was 6 GPa. The Vickers hardness of $CrB_2$ addition of $Cr_3C_2$ composites was higher than monolithic $CrB_2$ sintered body. The powder X-ray diffraction analysis detected CrB and $B_4C$ phases in $CrB_2$ containing $Cr_3C_2$ composites.

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1991

This study has been performed to find out the effect of austenitizing temperature, austempering temperature and its holding time, and tempering cycle on the mechanical properties such as impact resistance, hardness etc. of AISI $M_2$ Mo series high speed tool steel austempered or tempered after austempering treatment. The results obtained from the experiment are as follows ; (1) Optical micrograph has revealed that the transformation rate of bainite is delayed as the austenitizing temperature increases and that bainite is most apparently transformed at an austempering temperature of $290^{\circ}C$. (2) The amount of retained austenite during austempering has been analysed to be increased by the X-ray diffraction technique as the transformation product of bainite is increased. It has also been shown that the longer the holding time of austempering, the more the transformation quantity of bainite is formed, exhibiting, however, that the rate of bainitic transformation is considerably retarded after a certain period of holding time elapses. (3) Hardness measurement has shown that hardness values obtained after austempering increase with decreasing the amount of retained austenite. (4) The austempering and then tempering cycle has been formed to give hardness values which are more greatly improved as austenitizing temperature is increased. (5) The mechanical property of the specimen primary-tempered for 1 hour at $550^{\circ}C$ after austempering for 2 hours at $290^{\circ}C$ from the austenitizing temperature range of $1180^{\circ}C$ to $1210^{\circ}C$ have been estimated to be good values.

• Journal of Convergence for Information Technology
• /
• v.9 no.7
• /
• pp.94-99
• /
• 2019

Friction stir welding was first reported by TWI(The Welding Institute) in 1991, and this welding method has been rapidly used in various industrial areas such railway, automobile, aerospace and shipbuilding industry. Here, we study core characteristics of friction stir welding (FSW) applied to Al 6005-T6 extruded sheets, which is the typical alloy used for railway car bodies. With the fixed welding speed of 500 mm/min, the rotating tool speed was varied from 600 to 1800 RPM. The results of hardness measurement revealed that the hardness of nugget area is ~70% with respect to the parent material, and for the selected range of rotation speed, no clear dependence was observed and the hardness values close to the parent materials were achieved for the area located 5 mm away from the welding interface. The tension test shows that yield strength and tensile strength were slightly decreased with increasing RPM, with no observed difference for the elongation.