• 동아시아식생활학회지
• /
• 제17권6호
• /
• pp.816-821
• /
• 2007

The physical properties and sensory characteristics of acorn starch gels (Dotori Mook), which were gamma-irradiated up to 3 kGy, were evaluated during storage at $4^{\circ}C$. Even at the dose of 2 kGy, the gamma irradiation decreased total bacteria in the Dotori Mook during 5 days of storage, to lower than the detection limit $(10^2CFU/g)$. The hardness of the control sample increased according to the days of storage, while the gamma irradiated samples had decreased hardness according to the irradiation dose. The sample irradiated at 3 kGy maintained the same hardness as the control at day 0 of storage. Irradiation did not affect the Hunter color values. No significant differences were observed in off-odor, color, springiness, and overall acceptability (p<0.05) at the irradiation dose of 2 kGy. It can be concluded that the irradiation of Dotori Mook, up to 2 kGy, does not affect the quality of the Mook during storage, with regard to texture and sensory characteristics. Moreover, the irradiated Mook was superior in maintaining hardness and had prolonged shelf-life time by sanitation.

• 한국식품저장유통학회지
• /
• 제15권5호
• /
• pp.682-686
• /
• 2008

매실의 과육부를 건조하여 분말형태로 만들어서 보다 다양한 형태의 식품 개발에 활용하기 위한 시도의 하나로 매실분말을 0.5%, 1.0% 및 2.0% 첨가한 식빵을 각각 제조하였으며, 매실농축액을 첨가한 식빵도 만들어 매실분말을 첨가한 식빵과의 특성을 비교하였다. 대조구의 호화개시 온도가 $62.3^{\circ}C$인데 비하여 매실분말 및 매실농축액 첨가구는 $58.5{\sim}62.2^{\circ}C$로 낮았다. 또한 매실분말 및 매실농축액의 첨가량이 증가함에 따라 호화개시 온도가 낮아지는 것으로 나타났다. 식빵의 부피와 용적비는 대조구와 매실농축액 0.5% 첨가구가 5.4로 가장 높았다. 또한 매실분말 및 매실 농축액의 첨가량이 증가함에 따라 식빵의 부피와 용적비가 작아지는 것으로 나타났다. 색도에 있어서 대조구의 명도(L)값은 78.70이었으나 매실분말 및 매실농축액의 첨가량이 증가함에 따라 점차 감소하였으며, 매실분말 및 매실농축액 2.0% 첨가구는 각각 74.61 및 64.95였다. 또한 대조구의 황색도(b)값은 9.06이었으나 매실분말 및 매실농축액 첨가량이 증가함에 따라 점차 증가하였으며, 매실분말 및 매실농축액 2.0% 첨가구는 각각 15.10 및 18.55였다. 매실분말 및 매실농축액을 첨가한 식빵은 대조구에 비하여 대체적으로 경도(hardness)가 높은 것으로 나타났다. 매실농축액 0.5% 첨가구는 색도 및 맛에서 대조구보다 높은 점수를 얻었고, 매실분말 0.5% 첨가구는 대조구에 비하여 점수는 낮았으나 유의적인 차이를 보이지는 않았다.

• 동아시아식생활학회지
• /
• 제23권3호
• /
• pp.349-356
• /
• 2013

When making a yellow layer cake, an existing chemical leavening agent, sourdough starter powder, was used instead of using baking powder in order to produce batter where the acid agent in the baking powder was reduced using baking soda. The control group had the lowest share of the batter and therefore had the highest specific volume. In a test group, the share of SP4 was low and therefore, the specific volume was high. In terms of physiochemical characteristics, the volume, symmetry and uniform index was high in SP4 in the test group. The control group had the highest moisture content followed by SP4. In terms of texture, the control group had the lowest hardness and highest springiness. In the test group, SP4 had the lowest hardness and highest springiness. The result of the sensory evaluation indicates that SP4 had the best taste and flavor. In terms of overall preference, SP4 showed significantly higher preference overall. However, it did not show any significant difference compared to the control group.

• 동아시아식생활학회지
• /
• 제22권3호
• /
• pp.378-385
• /
• 2012

This study carried out to investigate the effects of yacon powder on yellow layer cake made with weak flour. After making yellow layer cake with yacon powder, water activity, crumb texture, crumb color, and sensory characteristics were investigated. After 1 day of storage, Aw value of control cake with weak flour did not show any significant differences, whereas those with 2, 4, and 6% yacon powder showed a significant increase in Aw. During storage, the Aw values of yellow layer cakes containing yacon powder decreased. Hardness and gumminess of yellow layer cakes containing yacon powder decreased compared to those of control, whereas springiness and cohesiveness of yellow layer cakes increased compared to those of control. Hardness, springiness, cohesiveness, and gumminess all increased with storage time. Further a higher percentage of yacon powder was associated with lower L and b values as well as a higher a value. The micrographs of yellow layer cakes with yacon powder showed slightly coarser porosity than that of control. The results of the sensory test showed that the overall acceptability of 2% yacon powder cake was the highest.

• 한국식품조리과학회지
• /
• 제18권3호
• /
• pp.280-289
• /
• 2002

The quality characteristics of breads with different concentrations(2%, 4%) of Paecilomyces japonica (J2, J4) and Cordyceps militaris (M2, M4) powder were compared in terms if sensory and mechanical properties. In the sensory test, J2 and M2 groups gained good scores in taste, texture and odor acceptance as control grourp. Paecilomyces japonica-added group showed higher moisture and bigger volume than that of control group, and Cordyceps militaris group showed lower moisture content and decreasing volume. 'L' values of J and M groups was lower than control, and the longer the storage period, the lower the lightness. The more Paecilomyces japonica was added, the higher the 'a' value was, but Cordyceps militaris showed an opposite trend. The hardness of the bread was the lowest in J2 group and the highest in M4 group, and the longer tile storage period. the higher the hardness was (p＜.001). Overall, the addition of 2% Paecilomyces japonica showed a similar tendency with control group, and showed good scores especially in acceptance, moisture and volume. Paecilomyces japonica appeared to be more desirable than Cordyceps militaris.

• 한국수산과학회지
• /
• 제48권3호
• /
• pp.293-300
• /
• 2015

We sought to extend the shelf-life of Alaska pollack Theragra chalcogramma sikhae while maintaining quality. We compared the chemical, microbiological, and organoleptic characteristics of sikhae prepared under four different conditions. Control fish were fermented at ambient temperature ($21{\pm}2^{\circ}C$); other samples were stored at $5^{\circ}C$ after fermentation at ambient temperature for 36 h (A1), 60 h (A2), and 84 h (A3). Volatile basic nitrogen and amino-nitrogen levels, and total acidity increased with fermentation time in all samples, but the pH fell, attaining a relatively lower level in the control than in other samples. Over 90% of all viable cells were lactic acid-producing bacteria; this proportion did not change significantly during fermentation. In terms of texture, only hardness was affected by fermentation. The hardness of the control fell more rapidly than did that of the other samples. In terms of sensory evaluation (the acceptance test and quantitative descriptive analysis [QDA]), A2 was superior to other samples after fermentation for different times; A2 maintained limited salability (6 points on the relevant index) for up to 17 days of storage.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.270-277
• /
• 2013

PURPOSE. This study was aimed to determine the effect of two chemically distinct denture cleansers and water on the surface hardness of acrylic and silicone based soft denture liners at various time intervals. MATERIALS AND METHODS. Two commonly used commercial resilient liner material were selected based on their chemical composition (silicone- and acrylic-based soft liners) for this investigation. 120 cylindrical specimens were made of $15mm{\times}10mm$ dimensions (according to ASTM: D-2240-64T) in a custom made metal mold. All specimens were stored in artificial saliva throughout the study. Forty specimens were cleansed daily in 0.5% sodium hypochlorite solution; forty were cleansed in sodium perborate and remaining forty specimens were daily rinsed in water. Testing was done at 1 week, 1 month, 3 months and 6 months for surface hardness using a Shore A Durometer. A mean of 3 reading for each sample was subjected to one-way ANOVA, Post Hoc test and pair-t test for statistical analysis. P values of less than 0.05 were taken as statistically significant. RESULTS. Surface hardness of all the samples was significantly higher after a period of 6 months irrespective of the cleansing treatment. Minor changes were observed between control, sodium hypochlorite and sodium perborate groups with time. Greater change was observed in surface hardness of acrylic-based soft denture liners as compared to silicone-based soft liners for all groups, as time progressed. CONCLUSION. Silicone-based soft denture liners performed significantly better in all cleansing treatments than acrylic-based soft denture liners.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.1081-1086
• /
• 2012

본 논문에서는 품질 검사 방법론이 적용된 계장화 압입시험을 수행하여 점용접부의 경도를 평가하였다. 먼저 정상 및 불량 용접조건하에서 제작된 점용접 샘플에 대해 로크웰 경도 및 계장화 압입시험을 실시하였다. 계장화 압입시험을 통해 구한 압입하중-변위선도를 이용하여 계산된 경도를, 동일한 조건의 동일위치에 대한 압입경도시험을 통하여 측정된 로크웰 경도와 확률론적 방법론을 이용하여 비교평가 하였다. 또한 계장화 압입시험을 통하여 추정한 경도 및 이에 대한 확률론적 해석을 수행하여 점용접부의 신뢰성 기반 품질 관리 기준 설정 가능성을 평가하였다.

• Nutrition Research and Practice
• /
• 제16권3호
• /
• pp.354-365
• /
• 2022

BACKGROUND/OBJECTIVES: Understanding the mechanism of chewing and swallowing food is important when creating a proper diet for older adults. This study investigated whether texture-modified model foods can reduce the difference in chewing and swallowing parameters between healthy community-living young and older adults. SUBJECTS/METHODS: In total, 35 older and 20 young adults (mean age: 75 and 25 years, respectively), matched for sex and number of teeth, were recruited and their unstimulated salivation and tongue pressure were measured. Simultaneous assessment of chewing and swallowing characteristics was conducted using surface electromyography and a videofluoroscopic swallowing study while the participants ingested 8 g of model food with one to four levels of hardness. RESULTS: The average tongue pressure and salivation among older adults were 61% and 49.7%, respectively, of the corresponding values observed in young adults. The older adult group used significantly (P < 0.05) increased muscle force with more chewing cycles (P < 0.05) than the young adult group, which was maintained even when consuming foods with the lowest hardness, although without chewing. However, the age effect on oral processing time existed only for the hardest foods. Swallowing difficulties among older adults were demonstrated by the significant increase in vallecula aggregation time. The total food intake duration was significantly (P < 0.05) longer in older adults than in young adults, regardless of food hardness. CONCLUSIONS: There were measurable differences in the process of chewing and swallowing food between young and older adults, which can be improved with food hardness control. Adjusting food hardness may help food intake in healthy older adults.

• 소성∙가공
• /
• 제31권3호
• /
• pp.129-135
• /
• 2022

The purpose of this study was to quantitatively evaluate the influence of hardness of tool materials on wear resistance in the sheet metal forming process. Punches used in the wear test were made of STD-11 and K340 tool material, and the tempering temperature was set to 530℃ and 500℃, respectively, to control the hardness of the tool materials. The punches mimic the shape of stamping tool of automotive body component to reflect its plastic deformation, and are designed to concentrate wear on the curvature region of punches. Progressive die and coil sheet were used to save time, cost, and raw sheet materials. By quantitatively measuring the wear depth of the punches, the wear behavior and mechanism of the punches were investigated, and characteristics of hardness and wear resistance according to tool materials and tempering temperatures were evaluated. Testing results indicate that the punch made of K340 tool steel with higher hardness had better wear resistance than that of STD-11 tool steel, and the hardness and wear resistance of tool steel were significantly impacted by the tempering temperature.