• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.270-276
• /
• 2000

Hard turning has the potential to replace grinding process and to achieve significant reduction in production time and cost. The main applications for hard turning is finishing process, namely grinding process. Therefore, it must be able to satisfy high surface integrity of the workpiece. This paper discusses surface quality in terms of residual stress and damaged layer with respect to cutting parameters in an intermittent hard turning. Damaged layer experiment is carried out orthogonal array. From that is based on the orthogonal array. From the response table, cutting parameters are analyzed from the view point of the damaged layer and residual stress. From this experimental results, even though in the intermittent hard turning, surface integrity turns out be good enough for replacing grinding process.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.547-554
• /
• 1994

This study was carried out in order to find out the soft tissue profile changes associated with maxillary incisor retraction in Angle's class I malocclusion patients. For this study fifty two female adult patients (Maximum Retraction Group 23, Minimum Retraction Group 29) who received orthodontic treatment were chosen. Following conclusions were obtained by analysing the changes of soft tissue and hard tissue before and after treatment. 1. When considering the mean changes of soft tissue and hard tissue, UP, LIP, Ls, Li (p<0.001), Point B, Si (p<0.01), Point A, Ss (p<0.05) were significant posterior movement in Maximum Retraction Group and UIP (p<0.001), LIP, Ls, Li (p<0.01), Point B, Si (p<0.05) were significant posterior movement in Minimum Retraction Group. 2. When considering the correlations between hard tissue and soft tissue changes, greater correlations were found in Minimum Retraction Group between UIP and Ls (p<0.01), Point A and Ss, UIP and Li, Point B and Si (p<0.05) than Minimum Retraction Group. 3. Correlations (p<0.01) were found between upper incisor retraction and posterior movement of the upper and lower lip in Thin Lip-Thickness Group, whereas no significant correlations were found in Thick Lip-Thickness Group. 4. Mean changes of the soft tissue thickness subsequent to incisor retraction were increased (p<0.01) in upper lip (Ls-Ls'), whereas no changes were found in lower lip.

• 한국가구학회지
• /
• 제23권2호
• /
• pp.122-129
• /
• 2012

This article was intended as fundamental materials to recognize the current status of furniture hard ware in Korean market and to fix the identity of Korean furniture, by investigating and comparing the furniture hard ware used in the Joseon era and in modern times by type, function, shape and material. The analysis of furniture hard ware of the Joseon era and modern times from the view of functional aspects was oriented to the hard ware necessary to open and close the door & drawer on one side, and to that being attached to the main body of furniture not to scratch the wood by another wood on the other side, and from this the following conclusion was drawn. First of all, "Gwangdoojung" - a kind of spike- and metal decoration on the edge of the furniture disappeared, while the function-oriented hard wares have been diversified in modern times, from the perspective of the change of kinds. Second, the functional aspect of the furniture hard ware was emphasized in modern times than the Joseon era. In other words, the hard wares of the Joseon era came into view due to their strong appeal to decoration, whereas those of modern times were mostly hidden or moderated, keeping the function substantially. Third, the hard wares from the Joseon era were shown in concrete and detailed shape motivated by natural objects and furthermore even gloriously, but the modern hard wares are simple & basic geometry, from a formative point of view. Fourth, the material aspects present that the Joseon era's hard ware was mainly cast iron, whereas that of modern times shows the diversification from metal to even plastic. Finally, the recent trend in naming of the hard wares is the words of foreign origin. This resulted from that the foreign names of hard wares are valid also after import process in Korean market, so the domestic development of hard ware as the essential factor for the furniture design is urgently necessary to establish the identity of Korean modern furniture.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권6호
• /
• pp.457-463
• /
• 2011

Introduction: This study evaluate the soft tissue changes to the upper lip and nose after Le Fort I maxillary posterosuperior rotational movement. Materials and Methods: Twenty Skeletal class III patients, who had undergone bimaxillary surgery with a maxillary Le Fort I osteotomy and bilateral sagittal split ramus osteotomy, were included in the study. The surgical plan for maxilla was posterosuperior rotational movement, with the rotation center in the anterior nasal spine (ANS) of maxilla. Soft and hard tissue changes were measured by evaluating the lateral cephalograms obtained prior to surgery and at least 6 months after surgery. For cephalometric analysis, four hard tissue landmarks ANS, posterior nasal spine [PNS], A point, U1 tip), and five soft tissue landmarks (pronasale [Pn], subnasale [Sn], A' Point, upper lip [UL], stomion superius [StmS]) were marked. A paired t test, Pearson's correlation analysis and linear regression analysis were used to evaluate the soft and hard tissue changes and assess the correlation. A P value <0.05 was considered significant. Results: The U1 tip moved $2.52{\pm}1.54$ mm posteriorly in the horizontal plane (P<0.05). Among the soft tissue landmarks, Pn moved $0.97{\pm}1.1$ mm downward (P<0.05), UL moved $1.98{\pm}1.58$ mm posteriorly (P<0.05) and $1.18{\pm}1.85$ mm inferiorly (P<0.05), and StmS moved $1.68{\pm}1.48$ mm posteriorly (P<0.05) and $1.06{\pm}1.29$ mm inferiorly (P<0.05). The ratios of horizontal soft tissue movement to the hard tissue were 1:0.47 for the A point and A' point, and 1:0.74 for the U1 tip and UL. Vertically, the movement ratio between the A point and A' point was 1:0.38, between U1 tip and UL was 1:0.83, and between U1 tip and StmS was 1:0.79. Conclusion: Posterosuperior rotational movement of the maxilla in Le Fort I osteotomy results in posterior and inferior movement of UL. In addition, nasolabial angle was increased. Nasal tip and base of the nose showed a tendency to move downward and showed significant horizontal movement. The soft tissue changes in the upper lip and nasal area are believed to be induced by posterior movement at the UL area.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권8호
• /
• pp.3366-3383
• /
• 2020

The Poisson point process (PPP) is widely used in wireless network modeling and performance analysis because it can provide tractable results for heterogeneous cellular networks (HetNets) analysis. However, it cannot accurately reflect the spatial distribution characteristics of the actual base stations (BSs). Considering the fact that the distribution of macro base stations (MBSs) is exclusive, the deployment of MBSs is modeled by the Matérn hard-core point process (MHCPP), and the deployment of pico base stations (PBSs) is modeled by PPP. This paper studies the performance of multiantenna HetNets and improves the energy efficiency (EE) of HetNets by optimizing the transmit power of PBSs. We use a simple approximate method to study the signal-to-interference ratio (SIR) distribution in two-tier MHCPP-PPP HetNets and derive the coverage probability, average data rate and EE of HetNets. Then, an optimization algorithm is proposed to improve the EE of HetNets. Finally, three transmission technologies are simulated and analyzed. The results show that multiantenna transmission has better system performance than single antenna transmission and that selecting the appropriate transmit power for a PBS can effectively improve the EE of the system. In addition, two-tier MHCPP-PPP HetNets have higher EE than two-tier PPP-PPP HetNets.

• 대한전자공학회논문지TC
• /
• 제44권8호
• /
• pp.62-67
• /
• 2007

센서네트워크 중에는 센서노드들이 넓은 지역에 걸쳐 정해진 위치에 산재되어야 하는 경우가 있다. 이런 경우 센서노드들을 interconnect하기 위한 최소개수의 연결노드들을 추가하는 문제가 대두되며, 이는 The Minimum number of Steiner Points라는 추상화된 문제로 귀결된다. 이 문제는 NP-hard 문제이므로, 본 논문에서는 문제가 내포하는 기하학적인 성질을 이용하여 연결노드의 최소개수에 근접하는 방안을 제시한다. 센서네트워크에서 노드의 개수를 줄임으로써 네트워크 내부에서 오가는 메시지의 교환량이 대폭 감소하게 된다.

• Elastomers and Composites
• /
• 제25권1호
• /
• pp.13-19
• /
• 1990

The purpose of this study is to estabilish the synthetic condition of polyurhethane elastomer for excellent properties. Polyurethane elastomer which have different NCO percentage and hard segment contents was synthesized by casting method. And the effects of hard segment contents were investigated by analytical methods such as IR, DSC, etc. [NCO]/[OH] ratio was proper at the range $1.02{\sim}1.05$. By IR absorption peak($1250cm^{-1}$) which indicate interurethane hydrogen bond it was confirmed that hard segment were crystallized. Melting point that was determined by DSC showed the effects of hard segment contents, phase mixing and crystalline size.

• Journal of Ship and Ocean Technology
• /
• 제2권1호
• /
• pp.1-12
• /
• 1998

A method to predict the dynamic roll stability of hard-chine planing craft is presented. Starting with the equation of motion, an equation governing small roll perturbations is developed. The roll restoring moment acting on the hull is evaluated by considering “static”and dynamic contributions. The contribution of rudders and skegs, which is significant for this type of craft, is also determined. A worked example is presented to show how the method can be used to find the maximum center of gravity height for transverse stability.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.247-259
• /
• 1996

Kinematic design sensitivity analysis for vehicle in suspension systems design is performed. Suspension systems are modeled using composite joins to reduce the number of the constraint equations. This allows a semi-analytical approach that is computerized symbolic manipulation before numerical computations and that may compensate for their drawbacks. All the constraint equations including design variables are derived in symbolic equations for sensitivity analysis. By directly differentiating the equations with respect to design variables, sensitivity equations are obtained. Since the proposed method only requires the hard point data, sensitivity analysis is possible in suspension design stage.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.190-197
• /
• 2000

A graphic vehicle modeling pre-processing program and a visualization post-processing program have been developed for AutoDyn7, which is a special program for vehicle dynamics. The Rapid-App for GUI(Graphic User Interface) builder and the Open Inventor for 3D graphic library have been employed to develop these programs in Silicon Graphics workstation. A Graphic User Interface program integrates vehicle modeling pre-processor, AutoDyn7 analysis processor, and visualization post-processor. In vehicle modeling pre-processor, vehicle hard point data for a suspension model are automatically converted into multibody vehicle system data. An interactive graphics capabilities provides suspension modeling aides to verify user input data interactively. In visualization post-processor, vehicle virtual test simulation results are animated with virtual testing environments.