• Journal of the Korean Electrochemical Society
• /
• 제17권3호
• /
• pp.164-171
• /
• 2014

A highly sensitive and selective non-enzymatic glucose sensor has gained great attention because of simple signal transformation, low-cost, easily handling, and confirming the blood glucose as the representative technology. Until now, glucose sensor has been developed by the immobilization of glucose oxidase (GOx) on the surface of electrodes. However although GOx is quite stable compared with other enzymes, the enzyme-based biosensors are still impacted by various environment factors such as temperature, pH value, humidity, and toxic chemicals. Non-enzymatic sensor for direct detecting glucose is an attractive alternative device to overcome the above drawbacks of enzymatic sensor. Many efforts have been tried for the development of non-enzymatic sensors using various transition metals (Pt, Au, Cu, Ni, etc.), metal alloys (Pt-Pb, Pt-Au, Ni-Pd, etc.), metal oxides, carbon nanotubes and graphene. In this paper, we show that Ni-based nano-particles (NiNPs) exhibit remarkably catalyzing capability for glucose originating from the redox couple of $Ni(OH)_2/NiOOH$ on the surface of ITO electrode in alkaline medium. But, these non-enzymatic sensors are nonselective toward oxidizable species such as ascorbic acid the physiological fluid. So, the anionic polymer was coated on NiNPs electrode preventing the interferences. The oxidation of glucose was highly catalyzed by NiNPs. The catalytically anodic currents were linearly increased in proportion to the glucose concentration over the 0~6.15 mM range at 650 mV versus Ag/AgCl.

• Journal of Korean Society of Environmental Engineers
• /
• 제28권10호
• /
• pp.1009-1015
• /
• 2006

The elcetrodewatering filter press(EDFP) which had anode and cathod plates to be set between filter plates was built for reducing the waterworks sludge and improving performance of dewatering equipment. Several tests to compare the dewaterability with conventional mechanical filter press dewatering(MDEP) and EDFP was conducted through this equipment. As test results, filtration amount discharged from EDFP measured 43.2 kg which increased against MDFP, and cake weight measured 4 kg which was two times against MDFP. The water content of dewatered cake from EDFP was 55wt% and dewatering velocity was 2.3 $kg/m^2{\cdot}cycle$. This water content decrease 20% and dewatering velocity increased 30% with compare to the MDFP. That is to say, EDFP constructed from electrodewatering mechanism increase filtrate discharging amount, which make dewatering velocity increase and produce the low water content dewatered cake against MDFP. Energy consumption of EDFP is analysed to 400 kwh/DS ton. The results to analysis the economical aspect considering the power consumption and the handling cost decline as sludge volume reduction due to producing the low water content cake showed that expenses to handle sludge of 1 ton by dry solid base cut down on 20,000 won. If considering several test aspects, it was analysed that EDFP was excellent in the side of performance as well as economical suitability.

• Journal of Korean Society of Environmental Engineers
• /
• 제27권5호
• /
• pp.491-498
• /
• 2005

J sewage treatment plant (WWTP) in Busan has used methanol as an external carbon source for the biological denitrification process. Methanol is widely used. but rather expensive and very dangerous in handling. Therefore, it has been required that the economic alternative carbon source must be developed. By-product from a fine chemical industry can be Purified by removing high molecular weight substances using the ultrafilter membrane separation process and RBDCOD fraction becomes $98{\sim}99%$ of COD substances in the purified by-product. The purified by-product containing three types of alcohols, methanol, prophylenglycol and methoxypropanol; showed similar chemical characteristics to the methanol, a main external carbon source, in biodegradation pathway. Shown above, the compatibility between main and alternative carbon sources has been achieved. Also very short or no adaptation period is necessary in the case of exchanging these carbon sources. The compatibility between external carbon sources is an essential element for stabilizing WWTP operations. During the full-scale application test of the by-product, the alternative carbon source line got on par with the treatment efficiency of the methanol line. With the test result, J-WWTP changed methanol to a fine chemical by-product, in two out of three J-WWTP lines. Moreover, it is expected that 55.4% of the external carbon source cost reduction can be achieved in the alternative carbon source applied lines.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제24권5호
• /
• pp.919-929
• /
• 2014

Recently, organizational efforts to adopt ISMS(Information Security Management System) have been increasingly mandated and demanded due to the rising threat and the heavier cost of security failure. However there is a serious gap between awareness and investment of information security in a company, hence it is very important for the company to control effectively a variety of information security threats within a tight budget. To phase the ISMS, this study suggests the priorities based on evaluating the Importance of 13 areas for the ISMS by the information security experts and then we attempt to see the difference between importance and investment through the assessment of the actual investment in each area. The research findings show that intrusion incident handling is most important and IT disaster recovery is the area that is invested the most. Then, information security areas with the considerable difference between priorities of importance and investment are cryptography control, information security policies, education and training on information security and personnel security. The study results are expected to be used in making a decision for the effective investment of information security when companies with a limited budget are considering to introduce ISMS or operating it.

• Archives of design research
• /
• 제19권2호
• /
• pp.207-216
• /
• 2006

Even though the notion exists that wall paper has got a short durability for interior decoration in terms of paper's nature, it can be the most important element among the modern dosing wall papering because of the variation of the walls visual effect. Wall paper hasn't been preserved well according to the paper's character and official records haven't been done well. So, by studying a case in which a room is maintained well, seeing various commercial samples which were used for an advertisement and reading several booklets it is possible to study historical evidence. In regard to wall paper and Papering. data, the commercial historic nature of the traditional wall papering has been recognized again in order to study the root of the technical and commercial background. In theory, the historic background research of traditional wall paper in the past is said to have established its theoretical system and the development of modern wall papering in the middle of Britain in 18th century. Through the theoretical study of wall papering, the following things have been researched: handling don the method of the traditional wall papering and lining paper, stylization of pattern by using the method of continual linking, subdivision of commercial cost and specialization of wallpaper, handing down the past traditional adhesion method, the origin of string wallpaper, utility of traditional wallpaper and its various abilities, the change from the face to face linking to duplicated linking, the development of DIY products by women's wallpaper selections. Put against other materials, wallpaper remains the most popular and preferable product for managing a wall and provides a decorative, wall dosing technique. This study can estimate the source of wallpapering history in order to create a systemic approach towards the future's wallpaper industry. This is very important data in order to establish a theoretical system of traditional wallpapering according to its historical research about wallpapering skills and its commercial aspect.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제10권11호
• /
• pp.2091-2098
• /
• 2006

In this paper, it proposes a protocol of resource adaptive data dissemination for sensor nodes in a wireless sensor network. In general, each sensor node used in a wireless sensor network delivers the required information to the final destination by conducting cooperative works such as sensing, processing, and communicating each other using the battery power of a independent sensor node. So, a protocol used for transferring the acquired information to users through the wireless sensor network can minimize the power consumption of energy resource given to a sensor node. Especially, it is very important to minimize the total amount of power consumption with a method for handling the problems on implosion. data delivery overlapping, and excessive message transfer caused by message broadcasting. In this paper, for the maintaining of the shortest path between sensor nodes, maximizing of the life time of a sensor node and minimizing of communication cost, it presents a method for selecting the representative transfer node for an event arising area based on the negotiation scheme and maintaining optimal transfer path using hop and energy information. Finally, for the performance evaluation, we compare the proposed protocol to existing directed diffusion and SPIN protocol. And, with the simulation results, we show that the proposed protocol enhances the performance on the power consumption rate when the number of overall sensor nodes in a sensor network or neighbor sensor nodes in an event area are increased and on the number of messages disseminated from a sensor node.

• The Journal of Engineering Research
• /
• 제4권1호
• /
• pp.5-22
• /
• 2002

With the rapid advance of internet service and the corresponding migration of service environment from the text-based one to WWW (World Wide Web) environment, the number of internet users is growing rapidly due to its easy usage. Accordingly, usage of internet as services for sending electronic mails to the other party over the network is becoming increasingly prevalent. Web-based electronic mailing system is comprised of a server and a client. The former provides the users with e-mail accounts and services, while the latter serves as a user interface. In other words, it enables those public users who dos not own e-mail accounts on the existing mail server to have an access to the mailing service through the web. In this paper, we designed a effective web-based electronic mailing system which is based on the internet explorer and linux operating system, which overcomes limitations of the existing e-mail systems and meets the need of a cost-efficient alternative. Our electronic mailing system also supports the convenience of users through appropriate handling of preregistered spam e-mails and multiple e-mails, and this facilitates the development of a stable e-mail system by being able to avoiding the low system performance due to the bursty characteristics of e-mail messages and the increasing number of users

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.51-57
• /
• 2019

A plant layout problem has a large impact on the overall construction cost of a plant. When determining a plant layout, various constraints associating with safety, environment, sufficient maintenance area, passages for workers, etc have to be considered together. In general plant layout problems, the main goal is to minimize the length of piping connecting equipments as satisfying various constraints. Since the process may suffer from the heat and friction loss, the piping length between equipments should be shorter. This problem can be represented by the mathematical formulation and the optimal solutions can be investigated by an optimization solver. General researches have overlooked many constraints such as maintenance spaces and safety distances between equipments. And, previous researches have tested benchmark processes. What the lack of general researches is that there is no realistic comparison. In this study, the plant layout of a real industrial C3MR (Propane precooling Mixed Refrigerant) process is studied. A MILP (Mixed Integer Linear Programming) including various constraints is developed. To avoid the violation of constraints, penalty functions are introduced. However, conventional optimization solvers handling the derivatives of an objective functions can not solve this problem due to the complexities of equations. Therefore, the PSO (Particle Swarm Optimization), which investigate an optimal solutions without differential equations, is selected to solve this problem. The results show that a proposed method contributes to saving the capital expenditures.

• Journal of Internet of Things and Convergence
• /
• 제8권6호
• /
• pp.55-63
• /
• 2022

In recent years, with the rapid development of large and medium-sized urban rail transit in China, the total operating mileage of high-speed railway and the total number of EMUs(Electric Multiple Units) are rising. The system complexity of high-speed EMU is constantly increasing, which puts forward higher requirements for the safety of equipment and the efficiency of maintenance.At present, the maintenance mode of high-speed EMU in China still adopts the post maintenance method based on planned maintenance and fault maintenance, which leads to insufficient or excessive maintenance, reduces the efficiency of equipment fault handling, and increases the maintenance cost. Based on the intelligent operation and maintenance technology of PHM(prognostics and health management). This thesis builds an integrated PHM platform of "vehicle system-communication system-ground system" by integrating multi-source heterogeneous data of different scenarios of high-speed EMU, and combines the equipment fault mechanism with artificial intelligence algorithms to build a fault prediction model for traction motors of high-speed EMU.Reliable fault prediction and accurate maintenance shall be carried out in advance to ensure safe and efficient operation of high-speed EMU.

• Safety and Health at Work
• /
• 제13권2호
• /
• pp.163-169
• /
• 2022

Background: It is estimated that about 13 million artisanal and small-scale miners carry out their activities under harsh, precarious, unfriendly, and risky conditions. Yet, our understanding of the extent to which these workers use personal protective equipment (PPE) and navigate through the various risks and hazards they face is still limited. This article has two main objectives. First, it explores the extent of usage of PPE among artisanal and small-scale miners for the prevention of hazards and risks. Second, it examines the coping strategies used by these miners as a response to experiences of occupational injuries and risks Methods: A cross-sectional survey of small-scale miners was conducted in six communities across three districts in Ghana, West Africa. The mixed methods approach was adopted. A total of 148 small-scale miners participated in the study. Six focus group discussions (FGDs) were held across the six communities. The data were analysed using descriptive statistics. Chi-square tests were used to analyse the relationship between some socio-demographic characteristics (sex, age, and educational background) and the usage of PPE. Open-ended questions and responses from FGDs were analysed based on the content and verbatim quotations from miners. Results: Findings suggest that 78% of the miners interviewed do not use the appropriate PPE citing reasons such as cost, and their personal discomfort associated with use of PPE. There was no significant relationship between socio-demographic characteristics (i.e., sex, age, education and major mining activity) and the usage of PPE. The study further revealed four main coping strategies used by miners to handle the risks. These are rest, taking unprescribed medication and hard drugs, registration with health insurance scheme and savings and investments. Conclusion: This study shows that very few artisanal miners use PPE despite the significant hazards and risks to which they are exposed. The study recommends to the government to put in place measures to ensure that miners adhere to health and safety regulations before undertaking mining activities. This means that health and safety plans and use of PPE should be linked to the license acquisition process for miners.