• Journal of Korean Institute of Industrial Engineers
• /
• v.13 no.2
• /
• pp.17-34
• /
• 1987

Modern telecommunication switching systems are SPC (Stored Program Control) machines handling voice, data and other kinds of traffic, in an environment which tends to be fully digital switching and transmission. The throughput of such systems is determined by the real time capacity of its centralized or distributed control processors and by the traffic capacity of the switching network. Designers must verify the traffic and call processing capacity of the switching system and check its performance under traffic load before it is put into service. Verification of traffic and call processing capacity of switching systems is one of the problems treated by teletraffic studies; teletraffic studies are based on stochastic process, queueing theory, simulations and other quantitative methods of decision making. This paper reviews the general methodologies to evaluate the throughput and performance of the digital switching system. TDX-10, which is a fully digital switching system under development in ETRI, is employed to give illustrative examples of the methodologies discussed in this paper.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.10 no.3
• /
• pp.8-16
• /
• 2014

Heating and hot water supply energy consumption of medium and multi boiler systems applied to military officer housing are compared with in-situ experiment and TRNSYS dynamic simulation program. In a multiple boiler system, small capacity boilers are connected in parallel to meet the required capacity. For handling partial loads, medium capacity boiler relies on on-off control, while multi boiler adopts PI control. Since multi boiler has higher efficiency and better control strategy, the results show that energy consumption can be reduced significantly with the multi boiler system.

• Geomechanics and Engineering
• /
• v.33 no.3
• /
• pp.231-242
• /
• 2023

This paper represents a comparative study in which Gene Expression Programming (GEP), Group Method of Data Handling (GMDH), and multiple linear regressions (MLR) were utilized to derive new equations for the prediction of time-dependent bearing capacity of pile foundations driven in cohesive soil, technically called pile set-up. This term means that many piles which are installed in cohesive soil experience a noticeable increase in bearing capacity after a specific time. Results of researches indicate that side resistance encounters more increase than toe resistance. The main reason leading to pile setup in saturated soil has been found to be the dissipation of excess pore water pressure generated in the process of pile installation, while in unsaturated conditions aging is the major justification. In this study, a comprehensive dataset containing information about 169 test piles was obtained from literature reviews used to develop the models. to prepare the data for further developments using intelligent algorithms, Data mining techniques were performed as a fundamental stage of the study. To verify the models, the data were randomly divided into training and testing datasets. The most striking difference between this study and the previous researches is that the dataset used in this study includes different piles driven in soil with varied geotechnical characterization; therefore, the proposed equations are more generalizable. According to the evaluation criteria, GEP was found to be the most effective method to predict set-up among the other approaches developed earlier for the pertinent research.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.3
• /
• pp.393-401
• /
• 2007

This study was performed to investigate the antioxidant activity of Korean ginseng using an ORAC(Oxygen Radical Absorbance Capacity) assay. Four fractions each (80% ethanol, ethyl acetate, water saturated 1-butanol, and water) were obtained from different ginseng samples (White Ginseng: ; 6 yrs-., 5 yrs-., ; Cork Ginseng: ; 5 yrs-., 4 yrs-.). The saponin content of each fraction was quantified by LC/MS, and the antioxidant capacity of the ginseng was measured by the ORAC assay. The ORAC method, which was recently validated using automatic liquid handling systems, has been adapted for manual handling with the use of a conventional fluorescence microplate reader. Furthermore, the ORAC assay provides a direct measure of hydrophilic chain-breaking antioxidant capacity against peroxy radical, which is the exiting and emission of 2,2'-Azobis (2-methylpropionamidine)-dihychloride (AAPH). As a result of our experiments, ginsenosides Rg1 and Rb1 were the two major saponins found in the ginseng samples, and Rc, Rb2, Re, Rd, Rg3, and Rh1 were detected in a small quantities. For the antioxidant capacities of the fractions (80% ethanol, ethyl acetate, butanol, and water), we found that the organic solvent fraction had similar antioxidant capacities, and were higher than the capacity of the water fraction. When determining the similarities in each fraction, only the ethyl acetate fraction showed similarity compared to other fractions (p>0.05). The antioxidant capacity of ginseng may come from phenolic compounds and some nonpolar saponins. However, based on the results of this study, we hypothesize that some acidic polysaccharides and other biological components may contribute to its antioxidant capacity. Additional research is required to determine other possible biological response modifiers that contribute to the antioxidant capacity of ginseng.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.403-408
• /
• 2007

The purpose of this paper is to show a way for measuring the rankings of efficient seaports in Korea by using DEA(data envelopment analysis) and model suggested by Jahanshahloo et al(2006). Two inputs(birthing capacity, and cargo handling capacity) and three outputs(export cargo handling amount, import cargo handling amount, and number of ship calls), and one cross sectional data(2004) for 26 Korean seaports are considered for measuring the efficiencies. An empirical main result indicates that ranking order of efficient seaports are Okpo, Samcheok Ulsan, Daesan, Busan, Gohyun Ports. Samcheok Port is classified as the most strong efficient port among 16 general ports except 10 container ports. The Korean seaport authority can adopt the new measurement way introduced in this paper for measuring the exact ranking order of efficient seaports when it decides the development and investment to each efficient seaport.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.2
• /
• pp.63-72
• /
• 2017

Purpose: The purpose of this study is to review the material handling system of the Airborne Infection Isolation Hospitals which is the one of the key elements of infection control and to improve the basic data for the planning and design of those facilities. Methods: Research was conducted by literature reviews and case studies for the material handling system of domestic and foreign Isolation hospitals. Results: The result of this study can be summarized into three points. First, a general isolation unit and a high level isolated unit need to be distinguished in terms of efficiency and safety. In particular, it is desirable that a high level isolated unit have to completely separate clean and soiled circulations, and soiled corridor should be installed by those means. By doing this, the medical staff can observe patient rooms and supply clean materials directly in the clean zone without wearing PPE, so that safety and work efficiency can be improved at the same time. Second, for the safe disposal of wastes, it is desirable to install a dedicated sterilizer per ward and sterilize it at least in the ward. In addition, It is desirable to install a central waste treatment room and a dedicated soiled corridor in consideration of the inadequate handling capacity and emergency situation. Third, the characteristics of material flow chart in the negative pressured isolation hospitals and the corresponding material handling system have been presented. Implications: Infection control is very important in safety, but it is necessary to respond to the symptoms of the patient.

• The Journal of Bigdata
• /
• v.5 no.1
• /
• pp.181-188
• /
• 2020

As the size of the airport terminal grows in line with the rapid growth of aviation passengers, the advanced baggage handling system that combines various data technologies has become an essential element in order to handle the baggage carried by passengers swiftly and accurately. Therefore, this study introduces the method of analyzing the baggage handling capacity of domestic airports through the latest data analysis methodology from the process point of view to advance the operation of the airport BHS and the main points based on event log data. By presenting an accurate load prediction method, it can lead to advanced BHS operation strategies in the future, such as the preemptive arrangement of resources and optimization of flight-carrousel scheduling. The data used in the analysis utilized the APIs that can be obtained by searching for "Korea Airports Corporation" in the public data portal. As a result of applying the method to the domestic airport BHS simulation model, it was possible to confirm a high level of predictive performance.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.353-359
• /
• 2009

Most domestic container terminals are lack of container storage capacity compared to the throughput of container. The main reason is the difference between the theoretical capacity applied to the development of terminals and the real capacity of a berth Another reason seems to be the increase of the container crane in number per berth to match the need for the getting larger vessel, which is resulted from the increase of the berth capacity from the start. This study, therefore, aims to suggest the economic size of container yard by comparing the existing one. For this the berth capacity was recalculated, the required yard size derived considering up to 10,000TEU vessel and then cost comparison done.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.8
• /
• pp.1599-1605
• /
• 2011

From now on, power line communication was made use of controling using 450 kHz narrow band, but as the PLC technology developing, in the near future get to the commercial step that is broadband PLC upto 30 MHz. In this paper, analyze the possibility of moving picture transmission for adapting surveillance camera which is among of the application of PLC. To analyze characteristics of channel, estimate the noise and impedance of lab, office, home. In case of noise, there is no problem to communicate each other because of 20 ~ 50 dB gain. In case of impedance, average impedance is about 100 ohm, it satisfy standards of designing modem but because max and min values get out of expectation there are some problem to acquire fully capacity of modems. Its condition is the same as transmission of multimedia data. In this test as more packets, as more handling rate, in lab, for the case that transmit 1,518 byte as the speed of 6 Mbps handling rate is upto 100%, it means possibility of moving picture transmission as the 6 Mbps speed. For delayed time there is no relationship about transmitted packets. As a result, there is no problem about applying surveillance camera via the PLC. And more cameras can work within PLC for considering the number of transmitted frames.

• IE interfaces
• /
• v.15 no.3
• /
• pp.316-324
• /
• 2002

Automated Guided Vehicles are widely used as an essential material handling system for FMS to provide flexibility and efficiency. We suggest a new dispatching rule based on priority function which considers urgency and empty vehicle travel time under finite buffer capacity. We evaluate the performance of the proposed rule by comparing the performance of Shortest Travel Time/Distance(STT/D) rule in terms of machine utilization, throughput and WIP level using simulation. The simulation results show that the suggested dispatching rule is robust and provides better machine utilization, throughput with comparable WIP level compared to STT/D rule.