• 한국항만경제학회지
• /
• 제26권2호
• /
• pp.82-98
• /
• 2010

본 연구에서는 첫째, 퍼지DEA모형을 해운항만분야에 이용한 국내외 기존연구들을 간략하게 검토하였으며, 둘째, Campos and Gonzalez(1989), 임성묵(2008)의 평균지수변환모형을 이론적으로 소개하였으며, 셋째, 국내 26개항만을 대상으로 2개의 투입요소(접안능력, 하역능력), 2개의 산출요소(화물처리량, 입출항척수)를 이용하여 평균지수변환모형에 의거하여 효율성을 분석하고 해석하였다. 실증분석결과를 요약해 보면 다음과 같다. 첫째, 일반 투입지향 CCR모형에서는 통영, 고현, 옥포, 속초항이 효율적이었으며, 여수항이 90% 후반의 효율성을 보였다. 둘째, 퍼지DEA 평균지수변환모형에서는 고현, 속초항이 가장 효율적이었으며, 옥포, 여수항은 람다값이 커질수록 효율성이 증가되었다. 또한 완도, 여수, 서귀포항은 람다값이 높아질 수록 효율성수치도 높아졌다. 셋째, 일반적인 투입지향 CCR 모형의 효율성 수치와 평균지수변환법에 의한 효율성수치의 평균순위는 거의 일치하였다. 본 논문이 갖는 정책적인 함의는 국내항만의 정책입안담당자들은 투입요소와 산출요소의 값을 정확히 알지 못하고 애매모호한 수준에서 알고 있을 때, 본 논문에서 사용한 퍼지 DEA 평균지수모형을 이용할 필요성이 있다는 점이다.

• 한국항해항만학회지
• /
• 제33권3호
• /
• pp.199-206
• /
• 2009

2007년 초 1만1천TEU 엠마머스크호의 첫 등장을 필두로 향후 5년 이내 1만5천TEU급의 극초대형선 등장이 예견됨에 따라 항만관련 기술들의 고생산성화, 첨단화, 자동화, 효율화는 필수적으로 동반되는 미래의 요구사항으로 대두되고 있다. 이러한 급격한 항만환경변화에 대응하기 위해 세계 선진항만운영사와 기업들은 항만산업시장 선점과 기술개발경쟁을 치열하게 벌이고 있다. 국내에서는 기존에 체계적, 분석적, 세부적인 항만기술개발 로드맵이 없어 국가적 항만기술개발 정책의 효율적 추진과 국내 항만관련 산업의 활성화를 이루지 못하고 있다. 따라서 본 연구에서는 세계 항만환경변화 추세를 바탕으로 분야별 국내 항만기술의 개발과제 도출과 개발우선순위를 분석하였고, 분야별/기술별 개발시점에 따른 거시적 로드맵 및 분야별 개발기술에 대한 제품개발과의 연관 로드맵을 수립하였다.

• 한국대기환경학회지
• /
• 제22권1호
• /
• pp.35-41
• /
• 2006

The steel foundries with electric arc furnaces handling metal scraps have recently gained an attention as a potential source of dusts. The present study focuses on the analysis of dust emissions and removals during furnace charging and melting processes by commercial CFD software named FLUENT. A body fitted grid system consisting of 880,000 meshes was first generated by Gambit for the electric arc furnace with the capacity of 60 ton/cycle and then FLUENT was invoked to solve the corresponding NavierStokers equation for the momentum, temperature and dust concentration. The entire processes from metal charging to metal melting were simulated to investigate the unsteady behaviors of fluid flows and dust concentrations. The model simulation results showed that as the top of the electric arc furnace opened for metal charging, hot plumes bursted out from the furnace rose strongly by buoyance and escaped mostly through the main hood. Therefore, the capacity of main hoods determined the vent efficiency in the metal charging process. As the furnace was closed after the metal charging and the metal melting processes was followed, the hot flow stream stretching from the furnace to the main hood was dissipated fast and the flow from the inlet of the bottom of the left hand side to the main and monitoring hoods constituted the main stream. And there was only a slow flow in the right hand side of the furnace. Therefore, the dust concentrations were calculated higher in the left hand side of the furnace, which was consistent with observations.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.220-237
• /
• 2004

China, as a developing country with a great number of population and relatively less energy resources, reasonably emphasizes the nuclear energy utilization development. For the long term sustainable energy supply, as for nuclear application the basic strategy of PWR-FBR-Fusion has been settled and envisaged. Due to the economy and experience reasons the nuclear power and technology development with a moderate style are kept in China up to now. In China mainland apart from two NPPs with the total capacity of 2.1 GWe in operation, four NPPs are under construction and two NPPs are planned for the Tenth Five Year Plan(2001-2005). Also another one or two NPPs are still in discussion. It could be foreseen that the total nuclear power capacity will reach 8.5GWe before the year 2005 and 14-15 GWe before 2010 respectively. As the first step for the Chinese fast reactor engineering development the 65MWt China Experimental Fast Reactor(CEFR) is under construction. The main components of primary, secondary and tertiary circuits and of fuel handling system have been ordered. The reactor building under construction has reached the top namely 57m above the ground. More than one hundred components and shielding doors have been installed. It is planned that the construction of reactor building with about 40,000$m^2$ floor surface will be completed in the end of the year 2002 and envisaged that the first criticality of the CEFR will be in the end of 2005. The second step of the Chinese fast reactor engineering development is a 300MWe Prototype Fast Breeder Reactor which is only under consideration up to now. Some important technical selections have been settled, but its design has not yet started.

• 한국물환경학회지
• /
• 제33권4호
• /
• pp.487-493
• /
• 2017

This study was conducted to propose measures of water quality management as the water criteria for waterscape facilities which have been highlighted as alternatives to wading pools in summer season was legislated. The number of public waterscape facilities has reached 290 sites in Gyeounggi province and 971 sites in South Korea in 2017. The water tank capacity of 80.3 % public waterscape facilities was less than $100m^3$. Facilities with disinfection system were only 6.5 % and facilities with filtration function were also very low at 6.9 %. Most of the waterscape facilities, about 93%, are expected to be vulnerable to complying with revised water quality criteria because they have to be disinfected by handling. Chlorine disinfectants, which are more persistent than ozone or ultraviolet sterilization methods, are more preferred. However, care should be taken when adding disinfectans because hypochlorous acid, which is an effective component of chlorine disinfectant, remains after the disinfection, but it is easily decomposed with time. For this study, ${\bigcirc}{\bigcirc}$ park floor fountain with a capacity of $63m^3$ was selected and the amount of free residual chlorine concentration was measured by injecting a certain amount of chlorine bleach. As a result, it took 5 hours to decrease from the water quality standard of 4 mg/L to 0.04 mg/L. If the waterscape facility is operated for 7 to 8 hours, the chlorine bleach should be re-injected after 5 hours. In addition, the problem of pH increase due to the input of chlorine disinfectant is expected, and the neutralization method using vinegar was proposed.

• 한국항만경제학회지
• /
• 제17권1호
• /
• pp.27-51
• /
• 2001

The purpose of this paper is to investigate the productive efficiency of world container ports by using the DEA (Data Envelopment Analysis) method and raw data from previous research in measuring the international competitiveness of world container ports. Ports have to cope with rapid changes in shipping environments. In order for a port to compete in the global market, it must provide port services promptly and accurately. Basically, there are two approaches to measuring the international competitiveness of a container port. First, there is the traditional productivity analysis method, which analyzes productivity based on the container port's facilities (efficiency, selectivity, land availability), and by its general capacity (handling ability, storage capacity, terminal productivity). Second there is multi-attribute utility analysis, which considers several elements including the reasons for selecting particular container ports and factors determining international competitiveness. This paper follows the first method (traditional productivity analysis) and extends the limitation of previous studies by using the DEA method newly, and suggesting: the relative productive efficiency of container ports. The main results of this paper are as follows: First, the results of the DEA analysis in terms of world container ports matches that of a previous study (Jun et al., 1993) at a level of 35%. The low ratio is due to the constrained set of input-output elements, the result of only twenty container ports being analyzed in this paper. Second, the result of the DEA analysis in terms of North-East Asia's container ports matches with that of a previous study (Ha, 1996) at a level of 100 percent. Therefore we can conclude that the DEA analysis is the best measurement method for international competitiveness. Policy implications for this study are as follows: First, when port authorities want to measure the international competition power of container ports and enhance their productive efficiency, they should consider the traditional method and newly introduce the DEA method. Second, according to the analysis results of the DEA method, pen authorities should recommend benchmarking ports as reference ports in order to enhance the productive efficiency of container ports that show an efficiency score of below 1.

• 한국축산식품학회지
• /
• 제39권6호
• /
• pp.888-902
• /
• 2019

Our aim was to investigate the effects of bromelain embedded in double emulsion (DE) on physicochemical properties of pork loin. We evaluated DE characteristics such as size, zeta potential, and microscopy after fabrication. We marinated meat with distilled water (DW), 1% (w/v) bromelain solution, blank DE, and 1% (w/v) bromelain loaded in double emulsion (DE E) for 0, 24, 48, and 72 h at 4℃, and prepared raw meat for control. The marinated samples were assessed for color, water holding capacity, cooking loss, moisture content, pH, protein solubility, Warner-Bratzler shear force (WBSF) and gel electrophoresis. The droplet size of 1% (w/v) bromelain embedded in DE was increased compared with blank DE (p<0.05) and values of zeta potential decreased. The increase in lightness and color difference range of the DE-treated group was lower than that of the DW-treated group (p<0.05). Moreover, treatment by immersion in 1% (w/v) DE E resulted in the highest water holding capacity values (p<0.05) and lower cooking loss values than water base treatment (p<0.05). Results for myofibrillar protein solubility and WBSF showed a similar trend. 1% (w/v) DE E showed degradation of myosin heavy chain after 48 h in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Thus, bromelain-loaded DE is useful for controlling and handling enzyme activity in food industry.

• 대한토목학회논문집
• /
• 제7권4호
• /
• pp.41-50
• /
• 1987

본(本) 연구(硏究)는 실제(實際) 매립지(埋立地)의 현장조사와 Lab-Lysimeter의 측정(測定)을 실시하여 침출수(浸出水)의 발생량(發生量)과 수질(水質)을 예측하기 위하여 수행되었다. 매립시간(埋立時間)의 경과에 따른 폐기물중(廢棄物中) 휘발성(揮發性) 고형물질(固形物質)(VS)의 함량(含量), 생분해가능물질(生分解可能物質)(biodegradable matter, BDM), 함수율(含水率)(moisture content), 수분저장능력(水分貯藏能力)(field capacity), 건조단위중량(乾燥單位重量)(dry density) 등(等)을 측정분석(測定分析)하여 매립지내(埋立地內)의 폐기물(廢棄物)의 성상(性狀) 및 분해(分解)정도를 파악하고, 매립지(埋立地)의 성상(城上)과 비슷한 Lab-Lysimeter를 제작하여 생폐기물(生廢棄物) 및 분해(分解)가 진행(進行)된 폐기물(廢棄物)을 투입하여 침출수(浸出水)의 발생량(發生量) 및 수질(水質)을 측정분석(測定分析)하였다. 또한 불포화(不飽和)흐름방정식(方程式)에 증발산량(蒸發散量)과 표면유출(表面流出)을 고려한 모델을 만들고, 분해요소(分解要素)를 적용하여 불포화분해이송식(不飽和分解移送式)으로 발전(發展)시켰으며, 유한차분법(有限差分法)(finite difference method)을 이용(利用)하여 computer program을 개발(開發)하였고 폐기물(廢棄物) 매립지(埋立地)에서 지수문학적(地水文學的) 요소(要素)와 폐기물(廢棄物)의 분해요소등(分解要素等)을 고려하여 simulation을 실시하였으며 실험결과(實驗結果)와 비교(比較) 검토(檢討)한 결과(結果), 본(本) 연구(硏究) 모델이 침출수(浸出水)의 발생량(發生量)과 수질(水質)을 예측하는데 적합하다고 판단되었다.

• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.193-212
• /
• 2009

The resilience of a city confronted with a terrorist bomb attack is the background of the paper. The resilience strongly depends on vital infrastructure and the physical protection of people. The protection buildings provide in case of an external explosion is one of the important elements in safety assessment. Besides the aspect of protection, buildings facilitate and enable many functions, e.g., offices, data storage, -handling and -transfer, energy supply, banks, shopping malls etc. When a building is damaged, the loss of functions is directly related to the location, amount of damage and the damage level. At TNO Defence, Security and Safety methods are developed to quantify the resilience of city infrastructure systems (Weerheijm et al. 2007b). In this framework, the dynamic response, damage levels and residual bearing capacity of multi-storey RC buildings is studied. The current paper addresses the aspects of dynamic response and progressive collapse, as well as the proposed method to relate the structural damage to a volume-damage parameter, which can be linked to the loss of functionality. After a general introduction to the research programme and progressive collapse, the study of the dynamic response and damage due to blast loading for a single RC element is described. Shock tube experiments on plates are used as a reference to study the possibilities of engineering methods and an explicit finite element code to quantify the response and residual bearing capacity. Next the dynamic response and progressive collapse of a multi storey RC building is studied numerically, using a number of models. Conclusions are drawn on the ability to predict initial blast damage and progressive collapse. Finally the link between the structural damage of a building and its loss of functionality is described, which is essential input for the envisaged method to quantify the resilience of city infrastructure.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.116-122
• /
• 2016

With the changes of industrial structure, contents and types in hazardous and dangerous works have been changed considerably. However, the hazardous and dangerous works by defined "Regulation for the hazardous and dangerous work employment restriction" and "Special education for safety and health"have not been amended over twenty years. This study aimed to identify the recent trends of the works by analyzing the death accidents cases from 2004 to 2013 and to present the management methods about future hazardous and dangerous works. The results showed that amount of 1,972 cases among 11,513 death accidents were equivalent to the works presented by "Regulation for the hazardous and dangerous work employment restriction". The amount of death accidents in 'Work of using construction equipment following construction machinery management act' was biggest among the death accidents cases and that of 'Work of handling pressure vessels following high-pressure gas safety control act' didn't show up. For the works in "Special education for safety and health"amount of 1,650 death accidents cases were equivalent. The amount of death accidents in 'Work involving a crane with a capacity of 1 ton or more or work which is carried out with a crane or hoist with a capacity of less than 1 ton in a workplace having at least 5 such machines' presented by "Special education for safety and health"was biggest. Also, death accidents case didn't occurred in three works presented by "Special education for safety and health". It was analyzed that works with low death accidents cases should be needed to study thoroughly the whole disaster research involving nonfatal accidents. Through this study, it was expected that regulation can be operated practically in the industrial field. Also, it is considered to increase