• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.371-378
• /
• 2014

Manual materials handling tasks are the main risk factors for the work-related musculoskeletal disorders. Many assistant tools for manual materials handling are being used in various kind of industries. One of them is a 4-wheeled cart which is widely used in manufacturing factories, hospitals, etc. The major force required to control the 4-wheeled cart is pushing and pulling. There are two types of handles being used for the 4-wheeled cart : vertical type (two vertical handles), and horizontal type (one horizontal handle). This study tried to investigate the pushing forces and subjective discomforts (hand/writst, shoulder, low back, and overall) of the two handle types with different handle height and distance conditions. Twelve healthy male students (mean age = 23.4 years) participated in the experiment. The independent variables were handle angle (horizontal, vertical), handle height (low, medium, high), and handle distance (narrow, medium, wide). The full factorial design was used for the experiment and the maximum pushing forces were measured in 18 different conditions ($2{\times}3{\times}3$). Analysis of variance (ANOVA) procedure was conducted to test the effects of the independent variables on the pushing force and discomfort levels. Handle height and angle were found to be the critical design factors that affect the maximal pushing forces and subjective discomfort. In the middle height, subjects exerted higher pushing forces, and experience lower discomfort levels compared to the high, and low height. There was no statistical influence of the handle distance to the pushing forces and subjective discomfort levels. It was found out that the effects of the handle angle (horizontal and vertical) on both pushing force and subjective discomfort were statistically significant (p < 0.05). The vertical handle revealed higher pushing force and lower discomfort level than the horizontal handle. The reason for that was thought to be the different postures of the hand when grasping the handles. The horizontal handle induced pronaton of the hand and made hand posture more deviated from the neutral position.

• 한국안전학회지
• /
• 제27권2호
• /
• pp.84-91
• /
• 2012

This study evaluated three forces (lifting, pushing and twisting) required to maneuver the single-wheel barrows according to handle height, width, horizontal angle and vertical angle. The four independent variables were varied in two levels. Handle height was varies in two levels : 'knuckle height (KH)' and 'KH + 0.1 ${\times}$ stature'. The two handle widths were '1.5 ${\times}$ shoulder width (SW)' and '1.75 ${\times}$ SW'. Two angles of $0^{\circ}$ and $15^{\circ}$ were used for horizontal and vertical angles. The 24 factorial design was used in the experiment. Twelve healthy male students (undergraduate and graduate) participated in the experiment. Subjects exerted three forces (pushing, lifting, and twisting clockwise) in each experimental condition. The order of 16 treatment conditions was determined randomly. Results showed that the effects of the four factors were different according to three forces. While lifting and twisting forces were higher in 'knuckle height', the pushing force was higher in 'KH + 0.1 ${\times}$ stature' (p < 0.05). Lifting and pushing forces showed higher values in the horizontal angle $0^{\circ}$ than in $15^{\circ}$. Handle width and vertical angle showed no statistically significant main effects on three forces (p > 0.05). Results of this study could be used as basic data for the ergonomic design of handle variables of one- or two-wheel barrows.

• 한국안전학회지
• /
• 제18권2호
• /
• pp.119-124
• /
• 2003

Despite rapid technological advance and increased automation facilities, many jobs and activities in our living require manual materials handling(MMH). These include wide variety of activities such as moving things, lifting bags. boxes or cartons, etc. Many studies found that handle could affect on maximum acceptable weight of lifting, but there were few studies f3r the effects of work posture and coupling in lifting tote box. This study performed that ten male college students were required to lift a tote box with and without handle for three postures (bending, straight, right angle posture). From the experiment, following results were obtained. (1) MVC reduced maximum 23% by type of handle. (2) MVC was highest in straight posture, but was lowest in right angle posture. (3) As a result of ANOVA, MVC paid attention to posture and coupling. (p<0.01) (4) To all handle types, biceps brachii activity was increased in right angle posture. but reduced in straight posture. (5) To all posture, biceps brachii activity was most lively in no handle. The results of MVC measurement, subjective rating, EMG analysis, statistic analysis showed that maximum acceptable weight of lifting was influenced by type of handle and straight posture was more comfortable than other postures. Based on these results, it was concluded that acceptable weight of lifting has to differ for work posture and coupling.

• 대한인간공학회지
• /
• 제27권2호
• /
• pp.49-57
• /
• 2008

This study aims to investigate the effect of handle angles of pliers on performance, wrist motion and subjective rating of satisfaction. An experiment was conducted, in which handle angle of pliers was used as independent variable and 14 subjects participated. Based on the literature survey, plier handles angled at 0$^{\circ}$, 10$^{\circ}$, 20$^{\circ}$, 30$^{\circ}$ and 40$^{\circ}$ were adopted in the experiment. The subjects were instructed to bend iron plates by 90$^{\circ}$ and to cut wires as soon as possible. The results revealed that 1) handle angles of pliers have significant effect on wrist motion and satisfaction(p<0.0001); 2) handle angles of pliers did not affect performance of completing tasks irrespective of types of tasks done in the study; 3) in the initial stage of windup, plier with handle angled at 20$^{\circ}$ produced the least wrist motion of deviation in task of bending iron plates, while plier with handle angled at 40$^{\circ}$ did in task of cutting wires; 4) degree of satisfaction was maximized when handle of pliers was bent by 20$^{\circ}$ in both tasks. On the basis of the results, it is recommended that handle of pliers be bent by 20-30$^{\circ}$ for reducing musculoskeletal disorders related to pliers.

• 한국안전학회지
• /
• 제26권1호
• /
• pp.58-64
• /
• 2011

This study evaluated the effects of the handle width(shoulder width, 1.25${\times}$shoulder width, 1.5${\times}$shoulder width), height(3 levels : knee, medium, knuckle) and horizontal angle($0^{\circ}$, $10^{\circ}$) on the pushing, lifting, and twisting strengths which were required for carrying single or two wheel barrows. Twelve healthy college students(male) participated in the experiment. In each experimental condition($3{\times}3{\times}2$=18), the subjects exerted three forces(pushing, lifting, and twisting clockwise). The experimental conditions and three forces were tested in random order, and a minimum 2 minutes of rest was provided between exertions. Results showed that the mean and maximum pushing forces showed greater values when the horizontal angle was $0^{\circ}$ than $10^{\circ}$(p=0.016). However, the three independent variables had no statistically significant effects on the lifting forces(p>0.1). The mean and maximum twisting forces increased as the handle width became larger(p<0.05). Also, there was a marginal effect of the horizontal angle(p=0.065) on the twisting force. From the results of this study, the horizontal angle of $0^{\circ}$ and the wider handle width were suggested for the design of single-wheel barrows.

• 한국정보통신학회논문지
• /
• 제16권2호
• /
• pp.266-272
• /
• 2012

본 논문에서는 차량 정보를 이용한 멀티뷰 주차 보조 시스템을 제안한다. 제안한 시스템은 운전자에게 차량 주변의 세 방향의 영상을 제공한다. 평행주차나 주차장에서 주차를 할 때 사각지역을 줄이고, 편안하고 안전한 주행을 위해 핸들 조정에 따라 와이드 앵글의 CCD 카메라 영상을 출력한다. 핸들 조향각과 기어 위치는 차량의 ABS ECU에서 OBD-II 포트를 통해 획득한다. 제안한 시스템은 차량 실험을 통해 성능을 확인하였다.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.33-39
• /
• 2023

The ball end mill is a type of cutting tool that is widely used to process complex mold shapes including aspheric surfaces. Unlike the flat end mill in which the cutting edge is formed on the cylindrical handle, the cutting edge is formed from the cylindrical handle to the hemispherical shape, which is advantageous for processing curved shapes. However, since the cutting speed continuously changes during machining due to the helix angle of the cutting edge or the machining inclination angle, it is difficult to obtain a precise machined surface. Therefore, in this paper, machining was performed while changing the helix angle of the ball end mill and the angle of the machining slope under the same cutting conditions for STD 11 material, which is widely used as a mold material. Through this, the effect of the two variables on the roughness of the machined surface was analyzed. As a result, if the helix angle was 0 degrees, it showed the best surface roughness of Ra. 0.16 ㎛. When the helix angle was 20 degrees, the best surface roughness of Ra. 0.18 ㎛ was occurred.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.235-236
• /
• 2008

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.135-138
• /
• 1996

A wide angle propagation techinque is formulated through an expansion of the Holmholtz operator followed by a Pade expansion and factorization of the resulting polynomials. Its accuracy is checked through the successful modeling of integrated waveguide turning mirrors, indicating that 6-th order polynomial can handle as large as 55$^{\circ}$tilt angle very accurately.