• 한국의류학회지
• /
• 제9권2호
• /
• pp.27-34
• /
• 1985

Cotton, P/C and polyester fabrics were laundered and treated with 4 kinds of aftertreating agent(antistatic and softening agents) on marketing. Some treating condition:. which include agent concenteration, treating time and rinsing extent after laundering, were varied. And then the effects of agents with each treating condition-handle value, charged voltage and half-life, and crease recovery etc.-were determined and discussed about their change. The improvement of handle and antistatic properties by treatment were indicated remarkably for cotton fabric and P/C and polyester fabrics respectively. Generally, the handle value of cotton was decreased and then increased again, and the charged voltage and half-life of P/C and polyester fabrics were decreased with increase of concenteration of agents. The effect of antistatic improvement for P/C fabric was larger than polyester fabric at even lower concenteration of agents. The effects were increased with treating time and rinsing extent. In particular, those of short time(1 minute) treatment were very small.

• Clinics in Shoulder and Elbow
• /
• 제6권1호
• /
• pp.80-84
• /
• 2003

We report a patient with an anterior dislocation of the shoulder with uncommon bucket handle type fracture of the anterior glenoid fossa with intact glenoid labrum. The fracture fragment was displaced into the posterior aspect of the glenohumeral joint resulting in prevention of reduction of the shoulder. Excellent fixation was obtained with suture anchors and bioabsorbable interfragmentary screws. This allowed stable range of motion exercises, optimizing the patient's functional outcome.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.169-176
• /
• 1998

This paper presents the vibration characteristics of a motorcycle body frame. In order to study the excitation mechanism. for example, of handle vibration, discrete models and finite element model are developed for the calculation of natural frequencies and mode shapes of the driveline and body. which can lead to the resonances. Experiments are also conducted to compare with the analytical results From the various kinds of vibration reduction methods, the technical realizable one is presented to reduce the handle vibration responses at the start of driving.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.103-108
• /
• 2002

The gas injection molding technique(GIT) is a special injection molding process and has been an established and acknowledged process technique for many years. GIT has proved successful in cases where warpage has to be minimized, sink marks avoided and material input reduced. The classic field of application for GIT, however, is the production of thick-walled, rod shaped parts or hollow articles. Through this application, the handle part for automobile is molded and this part is consequently used as a insert for the additional injection molding process encapsulated with PVC.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.39-40
• /
• 2006

The operation of wheel-loader is mainly divided into steering and excavating. The existing wheel-loader is used by handle for steering operation and by joystic for excavating operation. When we do steering and excavating operation simultaneously, we feel so uncomfortable because we have to use handle and joystic simultaneously. Therefore, we need to develop eletro-joystic steering system instead of hydraulic-handle steering system. So we can improve driving convenience in industrial field. This paper analyze spool of steering wheel and joystic and drive open area diagram. As a result, we can know characteristics of each valve before developing new electro-joystic steering system for wheel-loader.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.5-12
• /
• 2004

A human-friendly interactive system that is based on the harmonious symbiotic coexistence of human and robots is explored. Based on this interactive technology paradigm, a robotic cane is proposed for blind or visually impaired travelers to navigate safely and quickly through obstacles and other hazards faced by blind pedestrians. The proposed robotic cane, "RoJi,” consists of a long handle with a button-operated interface and a sensor head unit that is attached at the distal end of the handle. A series of sensors, mounted on the sensor head unit, detect obstacles and steer the device around them. The user feels the steering command as a very noticeable physical force through the handle and is able to follow the path of the robotic cane easily and without any conscious effort. The issues discussed include methodologies for human-robot interactions, design issues of an interactive robotic cane, and hardware requirements for efficient human-robot interactions.ions.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.792-800
• /
• 1996

The shape retention finishing provides a fabric for easiness of no-ironing after laundering. In spite of the obvious importance of the new finishing treatment, few systematic studies have been performed on the handle of the fabrics finished by the durable press process. The purpose of this research is to investigate the relationships among the mechanical properties, durable press conditions, primary hand values and the total hand value of the fabrics finished by shape retention process. In this experiment, durable press grade of unfinished fabrics decreased below 2.5, but those of finished fabrics maintained above 4, but the mechanical properties of finished fabrics did not change significantly after laundering. In finished fabrics, D.P. value were correlated with mechanical properties, but had little effects with H.V. and T.H.V. Since the evaluation of the effect of durable press process was done with the naked eyes and standard sample, we could not know exactly change o( mechanical properties, but trace the change of mechanical properties which gave influences on the durable press effects by using KES-FB System.

• 감성과학
• /
• 제11권1호
• /
• pp.123-129
• /
• 2008

본 연구에서는 PET 직물의 물성개선과 품질의 향상을 위해 직물 제조 공정 중 제직준비공정인 ITY, P/W, 2-for-1공정에서 여러 가지 공정인자의 변화를 주어 염색 가공 공정을 거친 최종 11가지 직물의 역학적 특성치 및 각 공정별 시료의 물성을 측정하여 직물의 감성특성인 Handle, 의복성능 및 봉제성을 평가하여 직물 제조 공정특성이 직물 감성에 미치는 영향에 대해 분석하였다.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.1-8
• /
• 2012

This study investigates stress and deformation due to static and dynamic vibration analysis about various types of bike handles installed with smart phone depositories. When force is applied on the side of handle at the models of type 1, 2, 3 and 4, the maximum equivalent stress is highest at type 2. The stress or deformation becomes lowest among these 4 model types. At vibration analysis, type 1 becomes safest within the range of 500Hz and type 3 becomes stable within the range of 100Hz. The result of this study can be applied with the design of bike handle installed with smart phone depository. The damage or deformation due to vibration can be prevented when the bike falls down. This result can be widely utilized to investigate and predict the durability.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.1-7
• /
• 2019

Most of people are riding on their own bicycle due to the health and environmental pollution problems. The weight must be light in order to run farther and easier by bicycle. The durability will be reduced due to the light weight of tubes and handles at bicycle. To solve this problem, the three bicycle handle models 1, 2 and 3 were compared with each other for structural analysis. The structural analysis was carried out in this study. Among three models, model 2 and model 3 had the highest and lowest strengths at the structural analysis results, respectively. At this study result, model 1 is thought to be the balanced excellent model with no defect among three models.