• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.795-800
• /
• 2014

In this paper, a vibrotactile pad system, T-mobile, is developed to provide vibrotactile cues for hand-held devices. A grooved and slim design is adapted to the back-side plane of the T-mobile, and the contact part consists of 12 vibrotactile panels which can operate independently and separately. To be isolated among vibrotactile actuators, the surface of the cover is divided into several pieces. Each vibrating module consists of a linear resonant actuator, a section of covering surface, and a vibration isolator. In order to provide spatial and directional information, sensory saltation and phantom sensation are applied to the T-mobile. To evaluate the developed device, two experiments were conducted to test whether directional information and spatial information can be successfully displayed by the device. Additionally, in order to find optimal stimulation by sensory saltation, an empirical test was conducted. As a result, spatial and directional information would be useful for displaying intuitive information for hand-held devices with vibrotactile feedback and reasonable near-optimal value for sensory saltation was obtained.

• Journal of the HCI Society of Korea
• /
• v.11 no.1
• /
• pp.29-38
• /
• 2016

Mobile tour guide applications help tourists to search for and visit their surrounding POIs(Points of Interest) of their locations and to obtain their guide information. With the development of wearable devices like smart watches and wearable glasses, people using multiple mobile devices are increasing; a tourist may use a hand-held device, a wearable device or both to obtain tour information. However, most mobile tour guides using mobile devices provide the tour information with little consideration of their hand-held and wearable characteristics. In particular, a tourist with multiple mobile devices who search for the tour information from multiple mobile devices must input their intention separately to each device. To alleviate these problems, we propose a mobile tour guide system with the following features: one is to reduce redundant user input by sharing the touring context between hand-held and wearable devices; the other is to present tour information according to capabilities and usage pattern of the devices. The proposed system guides tourists by complementing disadvantage of the devices and also minimizes user interaction between applications and tourists.

• The Journal of Information Systems
• /
• v.18 no.3
• /
• pp.27-46
• /
• 2009

Korean society frenzy about ubiquitous computing is in a rapid change into so called 'Nomadic' information environment. In many previous studies, a number of intrinsic and extrinsic motivation factors were empirically found to affect users' continuance to use mobile hand-held devices. However, the role of device attachment, a new intrinsic motivation factor with which users are known to care about their own mobile devices personally, in determining users' post-adoption behavior was not explored yet to the full scale. To fill the research void like this, this study proposes a new research model in which device attachment as well as perceived value are positively linked to satisfaction and continuance to use. The statistical results obtained by applying PLS to the valid 137 questionnaires showed that the device attachment has stronger positive influence on satisfaction and continuance to use than the perceived value. Therefore, a practical implication is suggested thai the mobile devices need 10 be designed in a way of arousing users' device attachment more strongly.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.2
• /
• pp.54-63
• /
• 2002

Recently, many web-enabled personal devices are becoming available for connecting to the internet, and there are many use]-s who access the internet from hand-held devices such as PDAs, cell phones. Most pages on the world wide web are designed for displaying on desktop computers with color monitor having at least 640$\times$480 resolution. But these devices do not have the same rendering capabilities as desktop computer, so the same web content needs to be rendered differently on hand-held devices. Therefore, there have been a variety of web transcoding techniques proposed to solve the problem between the web contents and hand-held devices. In this paper, we propose a web transcoding system(WebPrism) for real-time information providing using the semi-automatic transcoding method. The semi-automatic web transcoding method is a good solution when if mobile users access the limited number of web pages which layout is not changed frequently, also WebPrism is implemented as a desktop PC and experimental result shows that the proposed system generates the best looking document for a given display size of PDA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.113-118
• /
• 2015

High-power semiconductor devices and microprocessors in factory electrical installation so sensitive to power quality measurements such as harmonic currents, voltage fluctuations, flicker, current imbalance. Therefore, the little change of power quality can influences the productivity of factory electrical machines. Troubleshooting these problems requires accurate measurements and analysis of power quality with monitoring instruments that can effectively locate issues and identify solutions. In this paper, the author presents hand-held power quality monitoring system to locate issues and identify solutions. The proposed system consists of two parts, One is to develop hand-held power meters by using NI(National Instrument) DAQ(Data Acquisition) and WLAN. Another is develop power quality monitoring MMI(Man-Machine Interface) using LabView software. To demonstrate the validity of the proposed algorithm, variable tests are carried out.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.357-362
• /
• 2006

This paper describes two kinds of personal hand-held electronic devices to enhance marine leisure safety. The one is Radar response-type safety device triggering by the pulse signal from a commercial 9GHz-band Radar to provide quick search and rescue with combined civilian-government-military fleets. The other one is M-RFID (Marine Radio Frequency IDentification) based safety electronic device using 900MHz Tx/Rx with spread spectrum frequency hopping and GPS. Through the field tests at sea using Korea Coast Guard's warship the operating performances are verified. Further plan for practical use of each device was also discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.728-736
• /
• 2007

The more improved the Internet and the information technology, the stronger cryptographic system is required which can satisfy the information security on the platform of personal hand-held devices or smart card system. This paper introduces a case study of designing an elliptic curve cryptographic processor of a high performance that can be suitably used in a wireless communicating device or in an embedded system. To design an efficient cryptographic system, we first analyzed the operation hierarchy of the elliptic curve cryptographic system and then implemented the system by adopting a serial cell multiplier and modified Euclid divider. Simulation result shows that the system was correctly designed and it can compute thousands of operations per a secdond.

• Journal of Information Processing Systems
• /
• v.6 no.3
• /
• pp.347-358
• /
• 2010

This paper presents a measurement system for 3D hand-drawn gesture motion. Many pen-type input devices with Inertial Measurement Units (IMU) have been developed to estimate 3D hand-drawn gesture using the measured acceleration and/or the angular velocity of the device. The crucial procedure in developing these devices is to measure and to analyze their motion or trajectory. In order to verify the trajectory estimated by an IMU-based input device, it is necessary to compare the estimated trajectory to the real trajectory. For measuring the real trajectory of the pen-type device, a PHANToMTM haptic device is utilized because it allows us to measure the 3D motion of the object in real-time. Even though the PHANToMTM measures the position of the hand gesture well, poor initialization may produce a large amount of error. Therefore, this paper proposes a calibration method which can minimize measurement errors.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.73-83
• /
• 2014

Thanks to the development of diverse audio editing Technology, audio file can be easily revised. As a result, diverse social problems like forgery may be caused. Digital forensic technology is actively studied to solve these problems. In this paper, a hand-held device identification method, an area of digital forensic technology is proposed. It uses the noise features of devices caused by the design and the integrated circuit of each device but cannot be identified by the audience. Wiener filter is used to get the noise sounds of devices and their acoustic features are extracted via MIRtoolbox and then they are trained by multi-layer neural network. To evaluate the proposed method, we use 5-fold cross-validation for the recorded data collected from 6 mobile devices. The experiments show the performance 99.9%. We also perform some experiments to observe the noise features of mobile devices are still useful after the data are uploaded to UCC. The experiments show the performance of 99.8% for UCC data.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.476-479
• /
• 2003

Recently, Bluetooth has been regarded as a new technology for short-range wireless connection. Although initial application of Bluetooth technology has been focused mainly on replacing cables between hand-held devices due to a limited packet size and short-range, general wireless telecommunication such as PAN and Ad hoc networks via Bluetooth-equipped devices is expected to be one of the most popular applications. Wireless equipments have been used to exchange data between host and mobile unit. The exchanging data may be several bytes of control command and the value of sensors with ultra-sonic, vision sensor, and encoder from mobile robot. However, most wireless equipments have some drawbacks such as lack of authentication, large size and high price. On the other hand, the benefits of Bluetooth are small size, low power, low price except short-range. Especially, there are some difficulties when wireless modules are used in indoor environments. In this paper, a method of using wire network in Bluetooth network is investigated as a solution to overcome the short-range problem of Bluetooth and difficulty in indoor environment.