• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.6
• /
• pp.41-50
• /
• 1995

A state-of-the-arts GaAs power metal semiconductor field effect transistor (MESFET) for 3.3V operation digital hand-held phone at 900 MHz has been developed for the first time, The FET was fabricated using a low-high doped structures grown by molecular beam epitaxy (MBE). The fabricated MESFETs with a gate width of 16 mm and a gate length of 0.8 .mu.m shows a saturated drain current (Idss) of 4.2A and a transconductance (Gm) of around 1700mS at a gate bias of -2.1V, corresponding to 10% Idss. The gate-to-drain breakdown voltage is measured to be 28 V. The rf characteristics of the MESFET tested at a drain bias of 3.3 V and a frequencyof 900 MHz are the output power of 32.3 dBm, the power added efficiency of 68%, and the third-ordr intercept point of 49.5 dBm. The power MESFET developed in this work is expected to be useful as a power amplifying device for digital hand-held phone because the high linear gain can deliver a high power added efficiency in the linear operation region of output power and the high third-order intercept point can reduce the third-order inter modulation.

• Journal of Biomedical Engineering Research
• /
• v.32 no.4
• /
• pp.285-288
• /
• 2011

In this study, we developed an optical coherence tomography(OCT) using a sweep-source laser whose center wavelength is 1310 nm and a probe of hand-held type. The developed hand-held probe targets to diagnose the middle ear, so it is miniaturized for ease and convenience of control. For the first time, we performed in-vivo clinical experiments on tympanic membrane(TM) perforation patients not reported from previous studies about OCT. The high-resolution sectional images of tympanic membrane perforation can be obtained. There aren't many studies about diagnostic instrument of the middle ear and diagnosis with sectional image of the middle ear, so the developed OCT system and hand-held probe are applicable to tympanic membrane perforation and other pathologic diagnosis in the middle ear.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.10
• /
• pp.896-908
• /
• 2014

The electrical medical device market have been expanded since the public interest in healthy living that has deepened together with the global health trend of the aging population. The external hand-held ultrasonic probe is a frequently approved medical device and it is commonly used in the clinical field. However, there is no obvious standard or a guideline in Korea on regarding evaluation of performance of such external hand-held ultrasonic probe for approval and quality management. In this study, local and foreign reference standards were reviewed to propose performance test standards and methods after conducting characteristic of probe, market, and permission status. In addition, such proposed test items were validated to develop a draft guideline that is internationally harmonized for performance evaluation. This study is expected not only improve the quality and performance of the external hand-held ultrasonic probe but also contribute to securing consistency of permission and evaluation works for approval.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.52-65
• /
• 1999

This study was performed to evaluate the hand-arm vibration of the steel processing factory workers. Measurement, evaluation and as sessment were based on the International Standard(ISO 5349). The frequency weighted accelerations of the various hand-held tools and total exposure time were measured to assess the periods for the white finger symptom to occur. As a result, it was found that the air angle grinder and the air baby grinder are more harmful than other hand-held tools. It was also found that using various vibratory tools together is more harmful than using a single tool.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.1052-1059
• /
• 2004

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1093-1095
• /
• 2007

This paper reviews the state of the art of critical processes and proposes novel structures of an integrated device comprising LCD and OLED backlight that increases the compactness and decreases the assembly time of hand-held mobile display units like the hand-sets of mobile phones

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.442-447
• /
• 2014

The aim of this study was to analyze perception of risk and using status of hand-held dental x-ray unit among dental hygienists in metropolitan area. This research was based on perception of risk and using status of hand-held dental x-ray unit survey in 257 dental hygienists from July 7 to 31, 2014. Data were analyzed with t-test, one way ANOVA, and multivariable logistic regression analysis using SPSS Windows 21.0 program and significance level was set at p<0.05. The hand-held dental x-ray unit to cover all type patients was 24.8%. The 62.6% of patients and 81.3% of operator doesn't wear lead apron, the experience rate of radiation education was 40.1%. The average of risk perception was 3.08 points. The associated factors of risk perception were career, number of radiation exposure per day, and possession of fixed x-ray unit. The increased of accumulated dose when the occupationally exposed work continues, it is necessary to effort of defense against dental radiation.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.102-106
• /
• 2014

In this paper, we investigate the realistic environment influence on the Hearing-Aid Compatibility(HAC) of the body-held device mock-up with a dual-band antenna. In detail, first, a dual-band internal antenna is designed considering the neighboring objects essential to a real attachable mobile device. This comes to reality by making its mock-up version. Second, the HAC of this device is simulated and measured for 'stand alone', and 'hand-held' cases. Particularly, the electromagnetic simulation of the designed antenna in the real device is verified by the standard measurement. Finally, the evaluated HAC is analyzed in terms of the relations with the bands, the mock-up environment and the hand effect.

• Research in Mathematical Education
• /
• v.8 no.1
• /
• pp.39-58
• /
• 2004

The School of Mathematical Sciences at University Sains Malaysia has offered a laboratory course on the integration of hand-held technology into the teaching and learning of mathematics since the beginning of the 2001/2002 academic year. This inquiry-based course highlights the explorations and application of mathematics in a data rich modeling environment. In addition, the course addresses several issues related to the effective integration of such technology into the mathematics curriculum. This paper discusses the appropriate use of graphing technology to present mathematical concepts and to support student's understanding in a student-centered learning environment, shares knowledge on the new mathematics that was made possible by hand-held technology, and summarizes student reactions to this innovative learning mode.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.4
• /
• pp.393-402
• /
• 2007

Remote sensing data can be integrated into crop models, making simulation improved. A crop model that uses remote sensing data was evaluated for its capability, which was performed through comparing three different methods of canopy measurement for cotton(Gossypium hirsutum L.). The measurement methods used were leaf area index(LAI), hand-held remotely sensed perpendicular vegetation index(PVI), and satellite remotely sensed PVI. Simulated values of cotton growth and lint yield showed reasonable agreement with the corresponding measurements when canopy measurements of LAI and hand-held remotely sensed PVI were used for model calibration. Meanwhile, simulated lint yields involving the satellite remotely sensed PVI were in rough agreement with the measured lint yields. We believe this matter could be improved by using remote sensing data obtained from finer resolution sensors. The model not only has simple input requirements but also is easy to use. It promises to expand its applicability to other regions for crop production, and to be applicable to regional crop growth monitoring and yield mapping projects.