• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.89-96
• /
• 2006

Purpose: To study effectiveness of heterogeneity correction of internal-body inhomogeneities and patient positioning immobilizers in dose calculation, using images obtained from CT-Simulator. Materials and Methods: A water phantom($250{\times}250{\times}250mm^3$) was fabricated and, to simulate various inhomogeneity, 1) bone 2) metal 3) contrast media 4) immobilization devices(Head holder/pillow/Vac-lok) were inserted in it. And then, CT scans were peformed. The CT-images were input to Radiation Treatment Planning System(RTPS) and the MUs, to give 100 cGy at 10 cm depth with isocentric standard setup(Field Size=$10{\times}10cm^2$, SAD=100 cm), were calculated for various energies(4, 6, 10 MV X-ray). The calculated MUs based on various CT-images of inhomogeneities were compared and analyzed. Results: Heterogeneity correction factors were compared for different materials. The correction factors were $2.7{\sim}5.3%$ for bone, $2.7{\sim}3.8%$ for metal materials, $0.9{\sim}2.3%$ for contrast media, $0.9{\sim}2.3%$ for Head-holder, $3.5{\sim}6.9%$ for Head holder+pillow, and $0.9{\sim}1.5%$ for Vac-lok. Conclusion: It is revealed that the heterogeneity correction factor calculated from internal-body inhomogeneities have various values and have no consistency. and with increasing number of beam ports, the differences can be reduced to under 1%, so, it can be disregarded. On the other hand, heterogeneity correction from immobilizers must be regarded enough to minimize inaccuracy of dose calculation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.1-7
• /
• 2018

The gases emitted from internal combustion engines using fossil fuels are causing many social problems, such as environmental pollution, global warming, and adverse health effects on the human body. In recent years, the demand for renewable energy has increased, and government policy support and research and development are also active. In the collecting part of a solar energy system, which is widely used at home, propylene glycol (PG) (anti-freeze), as a heating medium, is mixed with water at a fixed value of 50%, and the heat is transferred to the collecting part at subzero temperatures. On the other hand, when leakage occurs in the heat medium in the heat collecting part, supplemental water is supplied to the solar heat collecting part due to the characteristics of the solar heat system, so that the concentration of antifreeze in the replenishing water becomes low. As a result, the temperature of the solar heat collecting part is lowered resulting in a frost wave, which causes economic damage. The purpose of this study was to develop a device capable of controlling the antifreeze concentration automatically in response to a temperature drop to prevent freezing of the heat collecting part generated in the solar energy system. The electrical conductivity of the H2O component was larger than that of PG, and the resistance increased with decreasing temperature. The PG concentration control values of 40, 50, and 60% should be controlled through calibration with a PG concentration of 39.6, 50.7, and 60.1%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.197-202
• /
• 2018

This study was conducted to evaluate the distortion and data accuracy that may occur depending on the methods employed by the oral scanner (intra-oral scanner). Deseutap 3D models employing a plaster model used clinically as a scanner to create a standard scan data using the same model, separated by oral scanners in three different ways (AS Group, ZS group, OS group) How to scan each 5 times made the scan data for each group, it shows the 0.121 mm, 0.172 mm AS group, OS group 0.423 mm accuracy in ZS group. The ZS group showed the highest accuracy, with maximum error values of 0.113 mm, 0.169 mm and 0.246 being observed for the ZS, AS and OS group, respectively. The three scanning methods showed a clear differences in accuracy and reproducibility and also appeared to be meaningful in clinical practice.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2011

The functional loot orthoses, when wearing shoes, are in the direct contact with bottom of foots to improve and recover the correctness of abnormal lower limb musculoskeletal imbalance and the primary role of foot and also, it can act to keep the balance and weight of body and support the weakened region, so that it is very helpful to keep body balance for the standing position. In this paper, it was researched that foot orthoses which is accommodable for the function of impact absorption including the gait stability affect on the balanced performances of body in according to the formation and the material of foot part. Taking into account the balanced performances by using the sway velocity, the estimation and comparison of the effects on the balanced performances by each formation and material for foot orthoses was evaluated into significant values(p<0.006) in only the eye-opening posture with Firm state, In this posture, the static process performed by each foot formation reveals in order of normal foot(p<0.010), flat foot(p<0.000) and hollow foot(p<0.003) and then, on the base of each formation of foot part, the result that analyze the effects of the materials of foot orthoses on the balance performance appeared showing that soft materials is more effective on the normal foot and, on the other hand, rigid materials is more effective in balancing on flat foot and hollow foot.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.49-57
• /
• 1999

In CLO2 delignification and bleaching process, formation of chlorate corresponds to a loss of 20-36% of the original CKO2 charge. Because chlorate is inactive and harmful to environmental, it will be of benefit to find methods that can reduce the formation of chlorate during chlorine dioxide bleaching. Chlorate is mainly formed by the reaction HCIO +ClO2 $\longrightarrow$H+ + Cl_ +ClO3-2 On the other hand, AOX in chlorine dioxide bleacing is formed also due to the in-situ produced hypochlorous acid. THus both AOX and chlorate could be reduced by addition of hypochlorous acid. Some paper son the reduction of AOX by additives appeared , but systematic data on chlorate reduction as well as pulp and effluent properties are not available. THus this paper of focused on the effects on the reduction of chlorate and chlorine dioxide bleachability. The additives, fulfamic a챵, AMSO, hydrogen peroxide, oxalic acid were found to eliminate chlorine selectively in chlorine and chlorine dioxide mixture.However, when they were added to bleaching process, sulfamic acid and DMSO showed significant reduction of chlorate formation but hydrogen peroxide and oxalic aicd did not, and significant amount ofhydrogen peroxide was found resided in the bleaching effluent , In addition, sulfamic acid and DMSO decreased the bleaching end ph values while hydrogen peroxide and oxalic acid did not, which also indicated that hydrogen peroxide and oxalic acid were ineffective. The difference might be ascribed to the competitives of hypochlorous acid with lignin, chlorite (CKO2) and additives. Sulfamic acid and DMSO showed better pulpbrightness development but less alkaline extraction efficiency than hydrogen peroxide , oxalic acid and control, which means that insitu hypochlorous acid contributes to the formation of new chromophore structures that can be easily eliminated by alkaline extraction. DMSO decreased the delignification ability of chlorine dioxide due to the elimination of hypochlorous acid, but sfulfamic acid did to because the chlroinated sulfamic acid had stable bleachability. In addition, sulfamic acid, and SMSO shwed decreased color and COD of bleaching effluents, hydrogen peroxide decreased effluent color but not COD content, and oxalic acid had no statistically significant effects. No significant decreases of pulp viocosity were found except for hydrogen peroxide. Based on our results , we suggest that the effectiveness of hydrogen peroxide on the reduction of AOX in literature might be explained by other mechanisms not due to the elimination of hypochlorous acid , but to the direct decomposition of AOX by hydrogen peroxide.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.433-442
• /
• 2017

As a result of the Four-River Restoration Project in Korea, the habitat of endangered plant species of Aster altaicus var. uchiyamae and Polygonatum stenophyllum, which had been natively grown in the riparian zone of Namhan River, was destroyed and artificial replacement habitats were created. In this study, Habitat Suitability Index (HSI) was used to determine whether the replacement habitats are suitable for each species or not. From October 2015 to July 2016, Habitat Evaluate Procedures (HEP) were conducted on two replacement habitats of A. altaicus var. uchiyamae (Gangcheonsum and Sum-River) and on two replacement habitats of P. stenophyllum (Gangcheonsum and Youngjuk) in the Namhan River watershed. As evaluation parameters for A. altaicus var. uchiyamae habitat, habitat matrix (ratio of unburied gravel), height above the ordinary water level, soil nutrients, and light conditions were selected and for P. stenophyllum habitat, soil texture, light conditions, and coverage of companion species were selected. HSI was applied to evaluate the suitability of each replacement habitat. According to the result of the evaluation, replacement habitats of A. altaicus var. uchiyamae and P. stenophyllum located in Gangcheonsum have relatively high HSI values as 0.839 and 0.846, respectively. On the other hand, replacement habitats of A. altaicus var. uchiyamae in Sum-River and P. stenophyllum in Youngjuk zone have HSI value of 0, indicating unsuitable habitats for these species. This is the first attempt to apply HSI for plant species in Korea and proved the usefulness of HSI on plants.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.760-763
• /
• 2012

This study was conducted to investigate foliar treatment effects of organic agricultural materials for the environmentally-friendly cultivation of grape. The organic materials applied were chitosan, wood vinegar (pyroligneous acid), amino acid solution, and ginkgo leaf extract. All the organic materials were relatively strong acidic ranging lower than pH 4.6. when comparing with other organic materials, amino acid solution contained relatively high contents of selected plant nutrients, such as N, P, K, Ca, Mg, Cu, Fe, Mn, and Zn. As comparison of selected soil properties in the grape cultivating field, soil pH values were lower at the harvest stage than at the first stage of grape growing (before treating the organic materials), and electrical conductivity (EC) and soil organic matter content were higher at the harvest stage in the all plots. The concentrations of available phosphorus increased in most of the plot soils except in control plot (conventional treatment). The concentrations of exchangeable K decreased in the plot treated with ginkgo leaf extract and the control plot. The exchangeable Mg concentrations decreased in soils of all the plots. On the other hand, the concentrations of N and K in the grape leaves were higher with the treatments of chitosan and amino acid solution, P concentrations were higher with the applications of chitosan, wood vinegar and amino acid solution, and Ca and Mg concentrations were higher with chitosan and amino acid solution treatments, respectively, than with others. The yields of grape were higher, $1,581{\sim}1,583kg\;10a^{-1}$, in the control and wood vinegar treatment plots than others. Sugar contents of grape were not different among all the plots.

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.495-501
• /
• 2016

Seok-jang is one of traditional seasonings prepared by solidification of the mixture of say sauce and salt for long period of aging time. In this study, the physiochemical properties of Seok-jang were investigated for the substitution of solar salt. Seok-jang exhibited highest mineral (P, Na, Fe, Mn, and Al) contents than those of solar salt and soy sauce, while showed lower soluble solids content than that of soy sauce. Seok-jang also exerted the highest pH value 7.70 compared to solar salt and soy sauce. Whereas magnesium and calcium contents of solar salts were 2.90 and 0.26 ppm, which were significantly higher than those of Seok-jang. In color values, $L^*$ value was highest in solar salt and lowest in say sauce, While the highest $a^*$ and $b^*$value were 6.19 and 18.2 observed in Seok-jang followed by a solar salt and soy sauce. On the other hand, less amount of insoluble solid and sand powder content were 0.03 and 0.07% found in Seok-jang, respectively. In conclusion, Seok-jang was suitable for the potentional substitution of natural salt ingredient.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.577-588
• /
• 1995

The chemical constituents for the seawater and sediment were measured to evaluate pollution in the sea around Pusan Harbor in winter, n992. The average value of trophic state index (TSI) was 19.4 at the outside of Buk Harbor, 50,4 at the inside of Buk Harbor, 56,3 at the Nam Harbor and 5,0 at the Kamchun Harbor. The high correlation found in salinity-nutrients diagram with AOU suggested that the enrichment of nutrients in Pusan Harbor during winter was mainly due to the influx of terrestrial effluents and partially by regenerated nutrients from suspended organic matters in the water column. The mean values of total ignition loss (TIL), COD and total sulfide in the surface sediments were$12.1\%$, 17.5 mg/g.dry wt. and 1.18 mg/g.dry wt. respectively. The highest level of those parameters was shown mostly at the inside of Buk Harbor. The mean concentration of total organic carbon (TOC), total organic nitrogen (TON), and total phosphorus were 24.9 mg/g.dry wt., 1.3mg/g.dry wt. and 0.69 mg/g. dry wt., respectively, Both of the highest level for TOC and total phosphorus have found at the Nam Harbor. On the other hand, the Highest level for TON was found at the inside of Buk Harbor. The TOC/TON atomic ratio with a range of 10.2-60.2 (mean value of 22.5) strongly indicated the active role of the input from the terrestrial organic pollutants.

• Journal of Korea Water Resources Association
• /
• v.53 no.5
• /
• pp.347-356
• /
• 2020

The main objective of the study is to propose the most efficient SWAT model calibration method using SWAT-CUP with less computing time and high performance. In order to achieve the goal, Case1-3 (250, 500, and 1,000 simulation runs) and Case4 (1,000 simulation runs in the first iteration and then 500 simulation runs for the following iterations) were defined to compare the results. When evaluating the values of the objective function, Case2 and Case3 reached the same value after the fourth iteration, and Case1 reached the closed value of Case2-3 after the eighth iteration. However, the final estimates of the parameters had different ranges in Cases1-3, and only the results of Case3 and Case4 converged similarly. Thus, it can be considered that the parameter calibration results are highly affected by the initial number of simulation runs. On the other hand, SWAT simulation results did not show the significant difference after the first iteration, unlike the parameter ranges. From the analysis results, we can conclude that the most suitable and effective method was to repeat one or two times of iterations with a sufficient number of simulation runs, as in Case4.