• 한국의류학회지
• /
• 제13권2호
• /
• pp.109-116
• /
• 1989

Korean clothings are admired for their beauty and traditional value. On the other hand, many of Korean women complain of chest restriction. Korean skirts may give high garment pressure to the wearers because the Korean skirt-band do not resolve physical tensions in size or in stretch. This paper aims at the identification of the garment pressure caused by the Korean skirt-band and the cardiopulmonary change caused by garment pressure. The Korean skirt-band were made in 3 kinds of size, and 21 women were selected for wearing test. The garment pressure was measured in front, side, and back parts of the body. The measured cardiopulmonary parameters were vital capacity, respiratory rate, heart rate, and blood pressure. The results were as follows: 1. The smaller the size of the Korean skirt-band, the greater the garment pressure. The pressure during inspiration was significantly greater than the pressure during expiration. 2. The pressure in side part was the greatest of the three measurements and the pressure in back part was the smallest. 3. The small size of the Korean skirt-band revealed low vital capcity and great respiratory rate. 4. As the small size grement was dressed, the respiratory rate and the heart rate during walking and rest after walking were significantly high. 5. Subjects felt uncomfortable when they wore small sized garment.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.502-507
• /
• 2019

Macro-porous carbon foams are fabricated using cured spherical phenolic resin particles as a matrix and furfuryl alcohol as a binder through a simple casting molding. Different sizes of the phenolic resin particles from 100-450 ㎛ are used to control the pore size and structure. Ethylene glycol is additionally added as a pore-forming agent and oxalic acid is used as an initiator for polymerization of furfuryl alcohol. The polymerization is performed in two steps; at 80℃ and 200℃ in an ambient atmosphere. The carbonization of the cured body is performed under Nitrogen gas flow (0.8 L/min) at 800℃ for 1 h. Shrinkage rate and residual carbon content are measured by size and weight change after carbonization. The pore structures are observed by both electron and optical microscope and compared with the porosity results achieved by the Archimedes method. The porosity is similar regardless of the size of the phenolic resin particles. On the other hand, the pore size increases in proportion to the phenol resin size, which indicates that the pore structure can be controlled by changing the raw material particle size.

• 대한가정학회지
• /
• 제44권10호
• /
• pp.145-154
• /
• 2006

The purpose of this study was to examine how the garment sizes by junior brand manufactures reflect Tween Generation's (ages from 5th grade to 9th grade) actual body sizes. They have diverse clothing preferences in styles and fitting levels as well as diverse body sizes and shapes. The subjects of this study were 520 students (the 5th and 6th grades in elementary schools, the 1st, 2nd and 3rd grades in middle schools) who lived in Jeonju. A questionnaire was used in this study. The data were analyzed by frequency, means, t-test and $\chi^2$. The results were as follows. In the selection of garment size, both the girl and boy students most preferred selecting garments after trying them on by themselves. Boy students tended to select garment size according to their mothers' advice. On the other hand, elementary school students showed a tendency to select garment size with their mothers. In fitting sizes, middle school girls wanted the size to fit tightly rather than loosely on their bodies much more than elementary school girls. Junior brand manufacturers produced sizes that well reflected actual body sizes of elementary and middle school girls. Specifically, the pants best covered their body sizes.

• 한국표면공학회지
• /
• 제46권4호
• /
• pp.175-180
• /
• 2013

Carbon nanofilaments (CNFs) could be synthesized using $C_2H_2/H_2$ as source gases and $SF_6$ as an incorporated additive gas under thermal chemical vapor deposition system. Ni powders were used as the catalyst for the formation of the CNFs. During the initial deposition stage, the initiation of the CNFs on the Ni catalyst was investigated. The geometries of the as-grown CNFs on Ni catalyst were strongly dependent on the size and/or the shape of Ni catalyst. Small size catalyst (<150 nm in diameter) gives rise to the unidirectional growth of the CNFs. On the other hand, large size catalyst (150~500 nm), the bidirectional growth of the CNFs could be observed. Particularly, the well faceted parallelogram-shaped Ni catalyst could give rise to the bidirectional growth of the CNFs having the symmetrically opposite direction. Eventually, these bidirectional growths of CNFs were understood to form the well-developed carbon microcoils (CMCs). Based on these results, the optimal shape and the size of the Ni catalyst to form the CMCs were discussed.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.76-84
• /
• 2003

Stereolithography is the technique using a laser beam to cure a liquid resin, a photopolymer, with three dimensional computer-aided design (CAD) data. The build parameters of stereolithography such as beam size, scan velocity. hatch spacing, layer thickness and etc. are determined by the accuracy of prototype, the build time and the cured properties of the resin. In particular, beam size is important processing parameter fur the other parameters. Therefore, this study observed the cured property to beam size. For this purpose, according to hatch spacing and beam size, the cure width and depth were measured on single cured line. Also, the cure width and depth were measured at single cured layer As a result of experiments. cure depth which varied from 0.23mm to 0.34mm was directly proportioned to beam radius. on the other hand, cure width which varied from 0.42mm to 1.07mm was inversely proportioned to beam radius. Surface roughness varied from 1.12 to 2.23 m for the ratio of hatch spacing to beam radius.

• 한국분무공학회지
• /
• 제13권1호
• /
• pp.42-50
• /
• 2008

In the present work, atomization characteristics of shear-thinning liquid slurry discharging from fan spray nozzles were studied experimentally for spray painting applications. The effects of solid particle size and concentration on the properties (especially on the viscosity) of suspensions and mean drop size were examined by using model fluids. In the range of low particle concentration (below 3 wt%), the fluid viscosity was primarily determined by the particle size. On the other hand, in the range of high particle concentration (higher than 10 wt%), the agglomeration phenomenon and the oil absorption capability of solid particles played major roles in determining the fluid viscosity. In the high concentration region, which most of the paints belong to, the fluid became more viscous and the shear thinning behavior appeared more prominent as the particle concentration was increased. In this region, mean drop size(SMD) decreased more rapidly with the increase of the injection pressure. Also, SMD became larger with the higher particle concentration and the larger particle size.

• 환경생물
• /
• 제35권4호
• /
• pp.515-520
• /
• 2017

Sexual dimorphism of the mouthpart, antenna and mandible of the Cyllorhynchites ursulus in South Korea was studied with linear measurements. The mouthpart and antenna measurements were conducted with a stereoscopic microscope using 122 specimens (72 males and 50 females). Microscopic observation of the mandible were conducted with a Field Emission Scanning Electron Microscope (FE-SEM) using 103 specimens (73 males and 30 females). Results showed that the size difference between males and females was significant in the size of the mouthpart and antenna. On the other hand, we could not detect sexual size dimorphism in the microstructure of the mandible. The bivariate plots made by the result of Principal Component Analysis (PCA) and Discriminant Analysis (DA) showed a size dimorphism in the size of the mouthpart and the antenna between males and females. Based on our study, sexual dimorphism in the mouthpart and antenna exists in C. ursulus from the South Korean population, and this difference seems to be related to the behavioral differences between males and females.

• 대한물리의학회지
• /
• 제17권1호
• /
• pp.1-9
• /
• 2022

PURPOSE: This study examined the effects of ankle kinesio taping on the balanced control capabilities of normal adults, stroke patients, and musculoskeletal patients. METHODS: One thousand articles were searched, and 100 of them were selected as taping papers. Subsequently, 33 papers classified according to balance, muscle strength and pain were analyzed according to the effect size and age group. RESULTS: The effect of ankle kinesio taping on balance control was examined by dividing the effect size into three groups according to the type of disease. Studies with normal adults had a large effect size of 1.213, whereas the effect size of stroke studies was .377, which was small. Studies on musculoskeletal disorders had a large effect size of 1.429. All three groups did not include 0 in the 95% confidence interval, indicating a significant effect. CONCLUSION: The effect of kinesio taping on balance control was positive in all subjects, including normal adults, stroke patients, and musculoskeletal patients. On the other hand, in terms of the effect size of kinesio taping on balance control, musculoskeletal patients and normal adults had larger effect sizes than stroke patients.

• 한국염색가공학회지
• /
• 제28권4호
• /
• pp.280-289
• /
• 2016

Silica microgel was prepared by sol-gel process and then functional groups, epoxy group and ethoxy group, were introduced on the particle by coupling treatment with 3-glysidoxypropyltrimethoxysilane. The functional silica microgel(functional SiGel) formation was identified using FT-IR spectrometry. Phase stability for DMF solution of functional SiGel, PU resin and pigment was evaluated by Turbiscan Lab. And physical properties of artificial suede including hand values, morphology and dyeing fastness were investigated. The mean particle size and the specific surface area of the functional SiGel were $0.77{\mu}m$ and $380m^2/g$. Mixture containing the functional SiGel, PU resin and pigment was more stable than the functional SiGel-free mixed solution. Artificial suede prepared by the functional SiGel had appearance and feeling close to natural suede. The migration fastness, the solvent wicking fastness and rubbing fastness of the artificial suede were enhanced to 4~5 grades, 4~5 grades and 3~4 grades, respectively.

• 종양간호연구
• /
• 제11권1호
• /
• pp.83-92
• /
• 2011

Purpose: This study was to analyze the characteristics and effect size of intervention studies in reference to cancer pain. Methods: In order to conduct a meta-analysis, a total of 208 studies were retrieved from search engine. And 29 studies published from 2000 to 2010 were selected upon their satisfaction with the inclusion criteria. The data was analyzed by the RevMan 5.0 program of Cochrane library. Results: 1) Intervention studies included 7 studies on reflexology (24.1%), 5 for pain management education (17.2%), 3 studies for each music therapy, spiritual care and hand massage (10.3%, respectively), and 2 studies for each hospice and horticultural therapy (6.7%, respectively). 2) The effect size of the intervention studies were high in hand massage (d=-0.98), reflexology (d=-0.74), spiritual care (d=-0.72), pain management education (d=-0.66), music therapy (d=-0.41), and horticultural therapy (d=-0.32). Conclusion: This study suggest that non-drug therapy can reduce the levels of cancer pain intensity, even though the numbers of intervention studies and randomized controlled trials are very rare.