• 제목/요약/키워드: Hand piece

검색결과 93건 처리시간 0.027초

배터리 구동방식 정형외과용 핸드피스 개발에 대한 연구 (A study about development of hand-piece for orthopedic surgery drived by battery)

  • 손창우;장성희;장영주;서태일
    • Design & Manufacturing
    • /
    • 제9권1호
    • /
    • pp.31-35
    • /
    • 2015
  • Recently, life expectancy increased in the development of medicine, the need for health has increased. Market for medical equipment is growing rapidly to an increase in the interest in health and aging worldwide. It is a device intended for ultra sensitive cleavage process of bone during joint replacement surgery on a technical advanced surgery, finishing, and hole. Domestic demand of the hand piece is a necessary condition on an ongoing basis. However, hand piece was made on the basis of the experience of many years in the country Japan, Germany, and the United States has spread to more than 90% domestic market. Feel the need for the development of the hand piece in the country, many companies are trying to in-house production hand piece. In an attempt to solve the problems with the hand piece of the present, in this paper, it was supposed to be a study of rechargeable hand piece to replace the existing pneumatic.

  • PDF

광선추적법을 이용한 핸드피스용 광섬유 광학계 시뮬레이션 및 특성 평가 (Simulation and evaluation of fiber optics for hand-piece using ray tracing method)

  • 박진홍;김휘;양병춘;이병호;유영종;김대욱;이창원;안세영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 C
    • /
    • pp.1962-1963
    • /
    • 2002
  • The hand-piece fiber optics is applied to medical appliances such as glaucoma theraphy to focus semiconductor laser on the affected parts efficiently. In this paper, we evaluate optical properties such as beam power and radius of a hand-piece probe by experiments and we also simulate the hand-piece optics by ray tracing method in order to study major parameters to optimize focalization ability. As results, we show experimental and simulation results of the hand-piece optics and also summarize several requirements that have to be considered in optimizing the hand-piece optics.

  • PDF

치과 치료기기용 에어 모터 핸드피스의 성능에 관한 수치 해석적 연구 (A COMPUTIONAL STUDY ON PERFORMANCE OF THE DENTAL AIR MOTOR HAND-PIECE)

  • 성용준;임설;송동주
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2010년 춘계학술대회논문집
    • /
    • pp.277-282
    • /
    • 2010
  • Imported vane type air motor and-piece is used widely in the domestic dental services. The imported hand-pieces are more than 90 percent in the domestic market. The air-motor unit of the hand-piece had not been developed inside of the country yet. Therefore it needs some research works. Purpose of this study is to design the air motor of the hand-piece for better performance. The geometry of the air-motor is based on product of NSK Company. The airflow of the air motor unit is simulated by Computational Fluid Dynamics. The performance analysis of the air motor units is investigated. ANSYS 12.0 CFX is used to analysis of the flowfield. Torque changes depends on spin calculated by the immersed solid method.

  • PDF

UV 레이저응용 마이크로 다공성 EPP 기판의 치과용 핸드피스 흡음성능에 관한 기초연구 (Fundamental study on sound absorption of a dental hand piece using micro-porous EPP substrate processed by UV laser)

  • 유동빈;신명호;변효진;최도정;성규원;마용원;신보성
    • 융합정보논문지
    • /
    • 제9권5호
    • /
    • pp.158-164
    • /
    • 2019
  • 최근에는 환자의 귀에 거슬리는 소음을 발생시키는 치과 용 핸드 피스의 소음을 줄이기 위한 많은 연구가 주목 받고 있습니다. 일반적으로 배기 밸브, 기계 또는 자동차의 공기 펌프 내부에 흡음재를 추가하는 방법이 기계적 소음을 줄이는 최적의 방법으로 널리 보고됩니다. 본 논문에서는 EPP 기판의 미세 다공성 구조를 이용한 새로운 UV 레이저 가공 및 흡음 효율 향상을 위한 치과 용 핸드 피스의 제조 방법을 연구 하였다. 슬라이스 된 EPP 기판의 표면에 UV 레이저 가공으로 다수의 미세 크기 기공이 만들어졌다. 본 실험에서 다양한 휴대용 기계에 적용할 수 있는 우수한 잠재력을 가진 마이크로 다공성 EPP 기판은 치과 용 핸드 피스 내부의 마이크로 머플러의 흡음 구조에 적용되었고 핸드피스의 소음을 측정한 결과 적용전의 핸드피스에 비해 약 4dB의 흡음효과를 나타내었다.

황동과 금형강의 와이어 컷 방전가공을 통한 가공특성 평가 (Evaluation of Machining Characteristics through Wire-Cut EDM of Brass and SKD 11)

  • 김정석
    • 한국생산제조학회지
    • /
    • 제6권4호
    • /
    • pp.130-137
    • /
    • 1997
  • The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

  • PDF

무빙메시를 이용한 치과 치료기기용 에어모터 핸드피스의 선응에 관한 수치해석적 연구 (A COMPUTATIONAL STUDY ON PERFORMANCE OF THE DENTAL AIR MOTOR HAND-PIECE USING MOVING MESH METHOD)

  • 성용준;류경진;송동주
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2011년 춘계학술대회논문집
    • /
    • pp.572-578
    • /
    • 2011
  • The vane type air-motor hand-piece is used widely in the dental services. There are a lot of experimental studies about air-motor but eccentrically off not many numerical studies by using Computational Fluid Dynamics. An air-motor has rotor which rotates at the center of inner housing. The retractable vanes are installed on the rotor. As the rotor of the air-motor rotates, vanes move up and down straightly in the radial direction along the guide. Therefore we have to analyze the unsteady flow field by accurate time dependent marching technique. ANSYS 12.0 CFX is used to analyze unsteady vane-motor flow field Analysis of the changing control volume inside air-motor is implemented by user-defined functions and moving mesh options. Rotational speed of the rotor is approximately 23,000rpm.

  • PDF

치과용 시술기구(Micro Handpiece)재료의 특성평가 및 표면품질에 대한 연구 (Study on Evaluation of Material Property of Micro Handpiece for dentistry and Surface Quality)

  • 손재환;한창우;최상일;김용중;최창진
    • 한국산업융합학회 논문집
    • /
    • 제9권3호
    • /
    • pp.221-228
    • /
    • 2006
  • As Industrialization gets more and more advanced, human technological medical apparatus for dentistry has been developed. Such a medical apparatus have to let precision revolution and torque control facilitate. Consequently, Development of Micro hand-piece with strong durability should be required. Moreover, It's also very important to evaluate performance of such a Micro hand-piece, Evaluation of Mechanical property of Material and ANOVA have been known as useful methods in the field of Quality Evaluation. For Verification of Quality Evaluation, It has been evaluated by One-way layout ANOVA based on the data of Surface Roughness Test. Anyhow, This test has been respectively carried out by 3 kinds of Test and Superior performance has appeared in the Test result.

  • PDF

고등학교 여학생의 교복 디자인에 따른 교복 만족도 및 맞음새 연구 (A study on students' satisfaction with and perceived fit of high school girls' uniform designs)

  • 권채령;김동은
    • 복식문화연구
    • /
    • 제24권4호
    • /
    • pp.399-416
    • /
    • 2016
  • The purpose of this study was to investigate students' satisfaction with, perceived ease of movement of, and perceived fit of high school girls' uniforms according to the uniform design. "P" high school, with a one-piece dress-type uniform, and "H" high school, with a two-piece type uniform, were selected for this study. Sixty-five female students from each school participated in the study. The questionnaire was composed of 21 questions about the school uniforms' purchase behavior, design, fit, ease of movement, and modification and participants' demographic information. Students from both schools were generally satisfied with the uniform design. However, in the open-ended response section, many "P" high school students responded that the fact that the one-piece dress pulled up when sitting or raising the hand made it uncomfortable. On the other hand, "H" high school students responded that the skirt was uncomfortable, because it left the body or underwear exposed when the wind blew due to the many pleats in the skirt. In the assessment of the ease of movement, "P" high school students were more likely to describe the uniform as uncomfortable than "H" high school students. Many students responded that they modified their school uniforms, and the length of the skirt and one-piece dress was the main part that was modified. This study suggests that growing female high school students are unsatisfied with the school uniforms' design and fit. Additionally, the perceived fit and satisfaction levels depend on the uniform design.

전통문양을 활용한 현대적 원피스 디자인 개발 연구 - 문양의 배치 및 색채 배색 과정을 중심으로 - (Development of a Modern One-piece Design using a Traditional Pattern - Focusing on the Arrangement and Color-Scheme of the Pattern -)

  • 강민정;조진숙
    • 복식문화연구
    • /
    • 제20권3호
    • /
    • pp.330-346
    • /
    • 2012
  • The purpose of this study is to link traditional patterns to modern clothing. Of all the traditional patterns, the cloud pattern was chosen for use during the development of a modern one-piece dress design. This study is based upon document searches, including research papers. Through these searches, it investigates the symbolic meaning, historical change, and formation of the cloud pattern. Based on this investigation, the study attempts to modernize the cloud pattern and apply the modernized patterns to the design of a one-piece dress. The design procedure includes three sub-processes: selection, arrangement, and color-scheme. The selection process was divided in two: first, the original form of the cloud pattern was hand-drawn using tracing paper: second, the form of the pattern was edited using Adobe Photoshop. The arrangement of the pattern was made through the checklist conception method, containing the following functions: expand, reset, repeat, and overlap. For the color-scheme of the pattern, Roy Lichtenstein's(1923~1997) work was selected, and the colors in his work were adopted when dyeing the rest of the one-piece dress as well as the cloud features. In conclusion, six modern designs of the one-piece dress were created by using one of Korea's traditional patterns - the cloud pattern. Therefore, this study can offer invaluable suggestions for multifaceted research on how to come up with design concepts which apply Korea's traditional patterns to clothing design.

CNC 선반가공(旋盤加工)에서 절삭조건(切削條件)에 따른 알루미늄의 표면(表面)거칠기 변화(變化) (The Surface Roughness of Aluminium Material according to Cutting Conditions in the CNC Lathe Working)

  • 김태욱;손기동
    • 한국산업융합학회 논문집
    • /
    • 제5권3호
    • /
    • pp.201-208
    • /
    • 2002
  • The machine tool which operates by hand is replacing by CNC machine tool to improve the quality of the product and the productivity in modem mechanic industry. The precision of machine part is influenced greatly the surface roughness by cutting condition of machine tool. So this study was performed to examine the aluminium surface roughness of section according to change of strength rating, nose radius, cutting speed, using live center. The results of this study are as follows; 1. In the case of 56mm diameter of test piece(length is below triple of diameter), whether establish the live center or not, doesn't influence to the surface roughness, and it is possible to make product without the live center. 2. The average surface roughness of 42mm diameter(length is quadruple of diameter) is similar to the 56mm diameter in the cutting condition of nose radius 0.8mm and cutting speed 140mm/min, but there are increases and differences in other cutting conditions. 3. In the case of test piece length more 70m/min(140m/mm) and nose radius improved greatly using the live center. 4. In the case of test piece length is quintuple of diameter, the nose radius must choose big tool and increase the cutting speed in preference live center establishment availability to improve that is surface roughness. Conclusively, if aluminum test piece length is fewer than triple of diameter, can process without establishing live center. If aluminum test piece length is more than quintuple of diameter, cutting conditions to improve surface roughness are (1) cutting speed (2) nose radius (3) whether the live center uses or not.

  • PDF