• Design & Manufacturing
• /
• v.9 no.1
• /
• pp.31-35
• /
• 2015

Recently, life expectancy increased in the development of medicine, the need for health has increased. Market for medical equipment is growing rapidly to an increase in the interest in health and aging worldwide. It is a device intended for ultra sensitive cleavage process of bone during joint replacement surgery on a technical advanced surgery, finishing, and hole. Domestic demand of the hand piece is a necessary condition on an ongoing basis. However, hand piece was made on the basis of the experience of many years in the country Japan, Germany, and the United States has spread to more than 90% domestic market. Feel the need for the development of the hand piece in the country, many companies are trying to in-house production hand piece. In an attempt to solve the problems with the hand piece of the present, in this paper, it was supposed to be a study of rechargeable hand piece to replace the existing pneumatic.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1962-1963
• /
• 2002

The hand-piece fiber optics is applied to medical appliances such as glaucoma theraphy to focus semiconductor laser on the affected parts efficiently. In this paper, we evaluate optical properties such as beam power and radius of a hand-piece probe by experiments and we also simulate the hand-piece optics by ray tracing method in order to study major parameters to optimize focalization ability. As results, we show experimental and simulation results of the hand-piece optics and also summarize several requirements that have to be considered in optimizing the hand-piece optics.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.277-282
• /
• 2010

Imported vane type air motor and-piece is used widely in the domestic dental services. The imported hand-pieces are more than 90 percent in the domestic market. The air-motor unit of the hand-piece had not been developed inside of the country yet. Therefore it needs some research works. Purpose of this study is to design the air motor of the hand-piece for better performance. The geometry of the air-motor is based on product of NSK Company. The airflow of the air motor unit is simulated by Computational Fluid Dynamics. The performance analysis of the air motor units is investigated. ANSYS 12.0 CFX is used to analysis of the flowfield. Torque changes depends on spin calculated by the immersed solid method.

• Journal of Convergence for Information Technology
• /
• v.9 no.5
• /
• pp.158-164
• /
• 2019

Recently many studies to reduce the noise of dental hand piece which generate inevitably mechanical sound to offend to the ear of a patient have been spotlighted. Generally, methods of adding a sound absorbing material inside the exhaust valve, air pump of machine or automobile are widely reported as optimal way to reduce the mechanical noise. In this paper we studied a new UV laser aided manufacturing of micro-porous structure of EPP substrate and applied dental hand piece to improve the efficiency of sound absorption. A lot of micro-sized pores were fabricated with UV laser processing on the surface of sliced EPP substrate. From fundamental experiments, more high-performance of micro-porous EPP substrate has finally demonstrated for sound-absorbing structure of the micro muffler inside dental hand piece, which actually has the excellent potential to apply a lot of potable machine.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.572-578
• /
• 2011

The vane type air-motor hand-piece is used widely in the dental services. There are a lot of experimental studies about air-motor but eccentrically off not many numerical studies by using Computational Fluid Dynamics. An air-motor has rotor which rotates at the center of inner housing. The retractable vanes are installed on the rotor. As the rotor of the air-motor rotates, vanes move up and down straightly in the radial direction along the guide. Therefore we have to analyze the unsteady flow field by accurate time dependent marching technique. ANSYS 12.0 CFX is used to analyze unsteady vane-motor flow field Analysis of the changing control volume inside air-motor is implemented by user-defined functions and moving mesh options. Rotational speed of the rotor is approximately 23,000rpm.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.3
• /
• pp.221-228
• /
• 2006

As Industrialization gets more and more advanced, human technological medical apparatus for dentistry has been developed. Such a medical apparatus have to let precision revolution and torque control facilitate. Consequently, Development of Micro hand-piece with strong durability should be required. Moreover, It's also very important to evaluate performance of such a Micro hand-piece, Evaluation of Mechanical property of Material and ANOVA have been known as useful methods in the field of Quality Evaluation. For Verification of Quality Evaluation, It has been evaluated by One-way layout ANOVA based on the data of Surface Roughness Test. Anyhow, This test has been respectively carried out by 3 kinds of Test and Superior performance has appeared in the Test result.

• The Research Journal of the Costume Culture
• /
• v.24 no.4
• /
• pp.399-416
• /
• 2016

The purpose of this study was to investigate students' satisfaction with, perceived ease of movement of, and perceived fit of high school girls' uniforms according to the uniform design. "P" high school, with a one-piece dress-type uniform, and "H" high school, with a two-piece type uniform, were selected for this study. Sixty-five female students from each school participated in the study. The questionnaire was composed of 21 questions about the school uniforms' purchase behavior, design, fit, ease of movement, and modification and participants' demographic information. Students from both schools were generally satisfied with the uniform design. However, in the open-ended response section, many "P" high school students responded that the fact that the one-piece dress pulled up when sitting or raising the hand made it uncomfortable. On the other hand, "H" high school students responded that the skirt was uncomfortable, because it left the body or underwear exposed when the wind blew due to the many pleats in the skirt. In the assessment of the ease of movement, "P" high school students were more likely to describe the uniform as uncomfortable than "H" high school students. Many students responded that they modified their school uniforms, and the length of the skirt and one-piece dress was the main part that was modified. This study suggests that growing female high school students are unsatisfied with the school uniforms' design and fit. Additionally, the perceived fit and satisfaction levels depend on the uniform design.

• The Research Journal of the Costume Culture
• /
• v.20 no.3
• /
• pp.330-346
• /
• 2012

The purpose of this study is to link traditional patterns to modern clothing. Of all the traditional patterns, the cloud pattern was chosen for use during the development of a modern one-piece dress design. This study is based upon document searches, including research papers. Through these searches, it investigates the symbolic meaning, historical change, and formation of the cloud pattern. Based on this investigation, the study attempts to modernize the cloud pattern and apply the modernized patterns to the design of a one-piece dress. The design procedure includes three sub-processes: selection, arrangement, and color-scheme. The selection process was divided in two: first, the original form of the cloud pattern was hand-drawn using tracing paper: second, the form of the pattern was edited using Adobe Photoshop. The arrangement of the pattern was made through the checklist conception method, containing the following functions: expand, reset, repeat, and overlap. For the color-scheme of the pattern, Roy Lichtenstein's(1923~1997) work was selected, and the colors in his work were adopted when dyeing the rest of the one-piece dress as well as the cloud features. In conclusion, six modern designs of the one-piece dress were created by using one of Korea's traditional patterns - the cloud pattern. Therefore, this study can offer invaluable suggestions for multifaceted research on how to come up with design concepts which apply Korea's traditional patterns to clothing design.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.201-208
• /
• 2002

The machine tool which operates by hand is replacing by CNC machine tool to improve the quality of the product and the productivity in modem mechanic industry. The precision of machine part is influenced greatly the surface roughness by cutting condition of machine tool. So this study was performed to examine the aluminium surface roughness of section according to change of strength rating, nose radius, cutting speed, using live center. The results of this study are as follows; 1. In the case of 56mm diameter of test piece(length is below triple of diameter), whether establish the live center or not, doesn't influence to the surface roughness, and it is possible to make product without the live center. 2. The average surface roughness of 42mm diameter(length is quadruple of diameter) is similar to the 56mm diameter in the cutting condition of nose radius 0.8mm and cutting speed 140mm/min, but there are increases and differences in other cutting conditions. 3. In the case of test piece length more 70m/min(140m/mm) and nose radius improved greatly using the live center. 4. In the case of test piece length is quintuple of diameter, the nose radius must choose big tool and increase the cutting speed in preference live center establishment availability to improve that is surface roughness. Conclusively, if aluminum test piece length is fewer than triple of diameter, can process without establishing live center. If aluminum test piece length is more than quintuple of diameter, cutting conditions to improve surface roughness are (1) cutting speed (2) nose radius (3) whether the live center uses or not.