• 제목/요약/키워드: Hand exposure

검색결과 501건 처리시간 0.028초

지역 병원에서 동상 환자에 대한 역학에 관한 연구 및 최근 치료 (Epidemiologic Study of Frostbites and Its Current Managements in Community Hospital)

  • 김동철;민병덕;김지훈;정창은;이종건;유성훈
    • 대한화상학회지
    • /
    • 제24권2호
    • /
    • pp.21-29
    • /
    • 2021
  • Purpose: Frostbite is a hazard to people exposed to cold environments. With the progression of modern industrial development and change of leisure behavior encountering cold environments, frequent accidental exposure to frostbite injury during work and human behavior is increasing, and the predisposing factors of frostbite were greatly changed than before. The purpose of this study was to make epidemiological analysis, and to review the treatment outcomes of frostbite. Methods: From March 2010 to February 2021, this study has included 27 patients with second- to third-degree frostbite injuries in Advanced Burn Reconstruction Center, Bundang Jesaeng Hosptial. A retrospective study was made about the distribution of age, gender, predisposing factors, prevalent area, type of managements, and the length of treatment period. Results: In our institution, acute management of frostbite patients has included rewarming, anticoagulation therapy (acetylsalicylic acid), and agents to improve vascular perfusion (lipo-prostaglandin E1 [Eglandin®]). The 25 frostbite patients with second-degree frostbite (92.6%) were successfully managed by the conservative treatment alone with a mean of 20.3 days healing time. Two patients with third-degree frostbite (7.4%) also showed good outcomes after surgical reconstruction with a mean of 59 days healing time. In our clinical experiences of third-degree frostbite, definitive surgical reconstruction should be recommended to wait for more than 4~6 weeks for identification of clear demarcation of necrotic tissue caused by frostbite. In this study, 43 frostbite injuries site in 27 frostbite patients occurred. Among them, 15 patients (55.6%) had multiple-site frostbite injury. The most common predisposing cause of frostbite was refrigerant gas accidents (44.4%), followed by outdoor activity in cold environments (40.8%), misapplying ice pack for treatment purposes (7.4%), barefoot walking on the cold ground (3.7%), and loss of consciousness in cold grounds (3.7%). The most prevalent sites of frostbite injuries revealed as the hand (58.1%), followed by the foot (32.6%), face (7.0%), and abdomen (2.3%). And in the winter season from the November to March, the incidence rate of frostbite injuries was high at 74.1%. Conclusion: This study included 27 frostbite patients with 43 frostbite sites since last decade in a single institution at the community hospital. The frostbite patients with second-degree frostbite (92.6%) were successfully healed by the conservative treatment alone with a mean of 20.3 days healing time. The most common predisposing cause of frostbite was refrigerant gas accidents (44.4%), followed by outdoor activity in cold environments, etc. The most prevalent site of frostbite injuries was the hand (58.1%). And the most prevalent seasonal incidence of frostbite was from November to March (74.1%).

폐상피세포 장벽에 대한 $H_2O_2$의 영향 (Effect of $H_2O_2$ on Alveolar Epithelial Barrier Properties)

  • 서덕준;조세헌;강창운
    • Tuberculosis and Respiratory Diseases
    • /
    • 제40권3호
    • /
    • pp.236-249
    • /
    • 1993
  • 연구배경 : 정상 폐상피세포에서는 항상 생성되고 있는 활성산소(oxygen radical)에 의한 유해작용에 노출되어 있고, 이들 유해 산소들은 폐기종과 같은 폐질환의 원인 기전으로 생각되고 있다. 본 연구에서는 이 방법을 이용하여 만든 폐상피세포 단일막에서 전기생리학적인 관점에서 물질의 이동지표인 short-circuit current(Isc)와 조직저항(R)에 대한 활성산소의 하나인 $H_2O_2$(hydrogen peroxide)가 어떤 영향을 미치는지를 연구함으로서 세포생리학적 기전을 구명하고자 한다. 방법 : Tissue culture-treated polycarbonant membrane filter 에서 배양시킨 쥐 제 2 형 폐상피세포 배양 단일막에서 $H_2O_2$의 능동적 이온 이동 (Isc) 과 수동적 용질이동에 대한 조직저항(R)에 미치는 효과를 관찰하였다. 배양 제 3 일과 제 4 일째 단일막을 수정된 Ussing chamber에 설치하고 막 양측에 HEPES-buffered Ringer 용액으로 incubation 하였다. 외부에서 0~100 mM 농도의 $H_2O_2$를 apical 또는 basolateral side에 작용시켜 Isc와 R의 변화를 관찰하였다. 폐상피세포 장벽이 외부의 $H_2O_2$에 대하여 방어작용을 가지는 세포내 catalase 활성도를 측정하고, catalase 억제제인 aminotriazol(ATAZ) 20 mM의 효과도 함께 관찰하였다. 결과 : 이 단일막은 형태학적으로 보아서 in vivo 에서의 포유류 제 1 형 폐상피세포 장벽의 특성을 나타내고 세포들 사이는 tight junction을 이루며(조직저항 R: 2,000 ohm-$cm^2$ 이상) sodium ion의 능동적 이동 (Isc: 5 ${\mu}A/cm^2$)을 보였다. $H_2O_2$는 dose-dependent 양식으로 Isc와 R 모두 감소시켰다. Apical side에 작용하는 $H_2O_2$에 있어서는 60분에 50% 억제하는 농도인 $ED_{50}$는 Isc와 R은 약 4mM 이었으나 basolateral side의 경우는 약 0.04mM 로서 그 작용 강도는 apical에 비하여 약 100배 정도 더 컸다. ATAZ 존재시 apical side의 $ED_{50}$는 0.4mM로 감소하였으나 basolateral side의 경우 변화가 없었다. $H_2O_2$의 제거율은 apical 또는 basolateral side 어느 쪽에 존재하든 같았으며, 세포내 catalase 활성도는세포배양기간이 길어짐에 따라 증가함을 보였다. 결론 : 이상의 실험결과는 basolateral side에 작용하는 $H_2O_2$는 세포내 막구성성분 중 basolateral 측에 존재하는 곳에(예, $Na^+,\;K^+$-APTase) 직접 장애를 미칠 것으로 생각된다. 한편 apical side에 작용하는 $H_2O_2$는 막성분에 도달하기 전에 세포내에 존재하는 catalase에 의하여 대부분 그 작용을 잃게 된다. 결론적으로 Isc와 R로 측정된 폐상피세포 장벽의 특성은 $H_2O_2$에 의하여 손상을 받고 apical side 보다는 basolateral side 측정이 더 손상을 잘 받게 된다.

  • PDF

조직배양(組織培養) 방법(方法)을 이용(利用)한 제초제(除草劑) 작용성(作用性) 및 제초제(除草劑) 저항성(抵抗性) 검정방법(檢定方法) 연구(硏究) (Tissue Culture Method as a Possible Tool to Study Herbicidal Behaviour and Herbicide Tolerance Screening)

  • 김순철;이수관;정근식
    • 한국잡초학회지
    • /
    • 제6권2호
    • /
    • pp.174-190
    • /
    • 1986
  • 조직배양(組織培養) 방법(方法)을 이용(利用)하여 제초제(除草劑)의 작용성(作用性) 및 제초제저항성(除草劑抵抗性) 검정방법(檢定方法)의 개선(改善)의 가능성(可能性)을 검토(檢討)하기 위해 1985년(年)~1986년(年)까지 2개년(個年)에 걸쳐 영남작물시험장(嶺南作物試驗場) 온실(溫室) 및 조직배양실험실(組織培養實驗室)에서 일련(一連)의 시험(試驗)을 진행(進行)하였던 결과를 요약(要約)하면 다음과 같다. 1) 제초제(除草劑) 작용성(作用成)을 연구(硏究)하는 데 사용(使用)되는 배지조건(培地條件)으로서는 기존의 MS, $N_6$, $N_6-Y_1$ 등(等)의 배지(培地)는 벼 자체(自體)의 생육(生育)을 50%이상(以上) 억제(抑制)하므로 현미배양배지(玄米培養培地)로서는 적합(適合)하지 않았으며, 생장조절제(生長調節劑)가 첨가(添加)되지 않은 순수한천배지(純粹寒天培地)를 이용(利用)하는 것이 바람직하였다. 2) 현미배양방법(玄米培養方法)에 있어서 제초제(除草劑)의 농도반응(濃度反應)을 뚜렷이 밝힐 수 있었으며, 대부분(大部分)의 수도용제초제(水稻用除草劑)은 지상부생육(地上部生育)보다 지하부생육(地下部生育) 억제정도(抑制程度)가 더 큰 것으로 나타났고, 광(光)의 유무(有無), 제초제(除草劑) 흡수부위(吸收部位)에 따라 작용성(作用性)의 차이(差異)를 보였는데 butachlor, 2,4-D, propanil은 광(光)이 있는 상태(狀態)에서, 그리고 DPX-F5384와 CGA 14264는 광(光)이 없는 상태(狀態)에서 생육억제(生育抑制) 영향(影響)이 컸다. 그리고 흡수부위(吸水部位) 반응(反應)에 있어서는 butachlor, chlornitrofen, oxadiazon, BAS-514는 근부(根部)와 유아부(幼芽部)를 동시(同時)에 제초제(除草劑)에 접촉(接觸)됨으로서 벼에 대(對)한 약해정도(藥害程度)가 증가(增加)되었고, 그 외(外) 제초제(除草劑)는 두 접촉방법간(接觸方法間)에 큰 차이(差異)를 보이지 않았다. 한편 피(E. crusgalli)의 경우도 비슷한 경향(傾向)이었으나, 전반적(全般的)으로 벼보다는 생육억제(生育抑制) 정보(程度)가 월등(越等)히 높았으나 butachlor, 2,4-D, chlornitrofen, oxadiazon, pyrazolate 및 BAS-514는 근부(根部)만 접촉(接觸)시켜도 피의 엽록소(葉綠素) 생합성(生合性)을 억제(抑制)시킬 뿐 아니라 생육(生育)이 거의 진전(進展)되지 않았으며, 그 외(外) 제초제(除草劑)들은 근부(根部)와 유아부(幼芽部)를 함께 접촉(接觸)시켜 주는 것이 바람직하였다. 3) 수도품종(水稻品種)의 제초제저항성(除草劑抵抗性)은 검정방법간(檢定方法間)에 다소차이(多少差異)를 보였는데 유묘검정(幼苗檢定)의 경우는 기존(旣存) 제초제(除草劑)인 butachlor, pretilachlor, thiobencarb, perfluidone, oxadiazon, 등(等)에 있어서는 일본형(日本型) 품종(品種) > 통일형(統一型) 품종(品種) > 인도형(印度型) 품종(品種)의 순(順)으로 제초제저항성(除草劑抵抗性)이 높았으나 DPX-F5384, NC-311, pyrazolate, pyrazoxyfen에 대(對)해서는 오히려 일본형품종(日本型品種)이 가장 낮은 저항성(抵抗性)을 보였으며, 현미검정(玄米檢定)의 경우 butachlor, propanil, chlornitrofen, oxadiazon, 등(等)에 있어서는 유묘검정(幼苗檢定)과는 달리 일본형품종(日本型品種)이 통일형품종(統一型品種)이나 인도형품종(印度型品種)보다 저항성(抵抗性)이 낮게 나타났다. 4) 동일품종(同一品種) 유형내(類型內)에서도 제초제저항성(除草劑抵抗性)의 품종간차이(品種間差異)를 보였는데 유묘검정(幼苗檢定)이나 현미검정(玄米檢定)에서 다같이 상대적(相對的)으로 저항성(抵抗性)을 보인 품종(品種)은 통일형(統一型)의 경우는 밀양(密陽)42호(號), 청청(靑靑)벼, 삼강(三綱)벼가 일본형(日本型)의 경우는 섬진벼가 낙동(落東)벼보다 인도형(印度型)의 경우는 IR50이 IR36보다 높은 저항성(抵抗性)을 보였다. 5) 현미배양방법(玄米培養方法)과 callus 배양방법(培養方法) 다같이 제초제(除草劑) 종류(種類)에 관계(關係)없이 제초제(除草劑) 농도(濃度)에 따른 벼 생육반응(生育反應)이 비슷하였는데, callus 생육반응(生育反應)이 더욱 민감(敏感)하였다. 6) 제초제(除草劑)에 대(對)한 callus 생육반응(生育反應)은 벼 뿐만 아니라 피 (E. crusgalli)에 있어서도 대단히 예민(銳敏)한 반응(反應)을 보였는데, $10^{-9}{\sim}10^{-8}M$의 저농도(低濃度)에서 제초제(除草劑) 종류간(種類間)의 차이(差異)가 뚜렷이 나타났으며, $10^{-7}M$ 이상(以上)의 농도(濃度)에서는 제초제성질(除草劑性質)에 관계(關係)없이 모든 제초제(除草劑)가 피의 callus 생육(生育)을 크게 억제(抑制)시켰다. 공시제초제(供試除草劑) 중(中)에서 BAS-514가 가장 낮은 농도(濃度)에서도 피의 callus 생육(生育)을 뚜렷이 억제(抑制)시켜 피에 대(對)한 살초력(殺草力)이 탁월(卓越)함을 알 수 있었다. 한편 제초제(除草劑)에 대(對)한 callus 생육반응(生育反應)은 광(光)의 유무(有無)에는 큰 영향(影響)을 받지 않았다.

  • PDF

저선량에서의 TrueX 재구성 방법에 의한 유용성 평가 (The Evaluation of TrueX Reconstruction Method in Low Dose)

  • 오세문;김계환;김승정;이홍재;김진의
    • 핵의학기술
    • /
    • 제15권2호
    • /
    • pp.83-87
    • /
    • 2011
  • 최근 진단분야에서 PET/CT는 종양학 분야뿐만 아니라 심장 신경 등 여러 가지 분야에서 널리 활용되고 있다. PET/CT의 중요성이 높아지면서 영상의 질과 관련된 재구성 방법에 대한 연구도 활발히 진행되고 있다. 이 중 Siemens사의 TrueX 재구성 방법을 phantom 실험을 통해 Iterative 2D 재구성 방법과 비교 평가하여 임상적 유용성을 높이고자 하였다. 선량에 따른 영상을 비교 평가하기 위해 contrast ratio와 FWHM을 측정하였고 Biograph 40 True Point PET/CT (Siemens, Germany)를 사용하여 실험을 실시하였다. Contrast ratio를 구하기 위해 NEMA IEC PET body phantom (Data Spectrum Corp.)을 이용하였고, FWHM을 측정하기 위해 capillary tube를 사용하였다. 모든 영상은 10분씩 획득하였고, 영상 재구성은 현재 사용하고 있는 TrueX와 기존에 사용하던 Itertive 2D 알고리즘을 사용하였다. Iterative 2D는 임상에 적합한 parameter 조건을 적용하고 TrueX는 Siemens에서 권고하는 parameter를 적용하여 실험하였다. Capillary tube를 사용하여 FWHM을 측정한 결과, TrueX가 Iterative 2D 방식보다 낮게 나왔다. 저선량일수록 FWHM의 차이가 점점 커졌다. NEMA IEC PET body phantom을 사용하여 contrast ratio를 구한 결과, TrueX가 Itertive 2D보다 좋은 양상을 보였다. 그러나 선량에 따른 차이는 보이지 않았다. 본 연구에서는 영상 분석을 통해 TrueX가 Itertive 2D보다 contrast ratio와 spatial resolution이 높게 나타났다. 또한 TrueX를 통한 재구성 결과 저선량일수록 기존의 Iterative 2D보다 resolution은 좋은 양상을 보였고 contrast ratio는 큰 변화를 보이지 않았다. 즉 PET/CT에서 TrueX 재구성 기법이 환자의 피폭도 절감하고 질적으로 우수한 영상을 구현할 수 있어 임상적 이용가치가 높다고 생각된다.

  • PDF

$Cd^{2+}$이 북방산개구리의 난자성숙과 배아발달에 미치는 영향 (Effect of $Cd^{2+}$ on the Oocyte Maturation and Developmental Stages of Brown Frog Embryo, Rana dybowskii in vitro)

  • 고선근
    • 한국환경생태학회지
    • /
    • 제20권3호
    • /
    • pp.345-351
    • /
    • 2006
  • 본 연구는 북방산개구리의 난자 및 배아를 활용하여 난자성숙현상과 배아발달과정에 미치는 $Cd^{2+}$의 독성효과를 조사하였다. 결과 $Cd^{2+}$ 0.1ppm에서 난자의 성숙현상을 억제하였으며 $Cd^{2+}$ 작용의 가역성을 조사하기 위해 3시간 동안 난자들을 $Cd^{2+}$에 노출시킨 후 보통배양액으로 옮겨 17시간 배양한 결과 1ppm에서는 가역성을 나타내었으나 2.5ppm에서는 비가역적 인 손상을 주었다. 발달 중인 2세포 배아를 $Cd^{2+}$의 여러 농도에 노출시킨 결과 0.1ppm에서 발달이 억제되었으며 노출시간이 길어진 32세포 시기에는 세포붕괴현상을 유발하였다. 한편, 포배기 배아를 $Cd^{2+}$의 여러 농도에 노출시 켜 96시간 배양한 후 유생의 치사율 및 기형율을 대상으로 probit 분석법으로 조사한 결과 LC50은 0.1ppm, EC50은 0.08ppm, TI는 5.0을 나타내어 $Cd^{2+}$은 높은 치사율을 나타내는 물질로 나타났다. 기형 양상은 척추기형이 0.05ppm에서 14.3%,꼬리기형이 0.1ppm에서 75.0%,복부기형 이 0.01ppm에서 66.7%를 나타내었고 profound형 기형이 0.1ppm에서 25.0%를 각각 나타냈으며 $Cd^{2+}$ 0.1ppm에서 머리에서 꼬리까지의 성장을 억제하였다. 결론적으로 본 연구의 결과들은 $Cd^{2+}$이 난자성숙, 난할 및 배아의 발달과정에 높은 독성의 효과를 가짐을 나타낸다.

서울시(市) 대기오염(大氣汚染)이 시민보건(市民保健)에 미치는 영향(影響)에 관(關)한 조사연구(調査硏究) (Epidemiological Study of Air Pollution and Its Effects on Health of Urban Population)

  • 정규철
    • Journal of Preventive Medicine and Public Health
    • /
    • 제2권1호
    • /
    • pp.5-22
    • /
    • 1969
  • The urban population of our country is rapidly increasing due to many factors of social structure, and sociologists are predicting that the increase rate of the urban population will be over 50% in 1980's. Above all, the population of the capital city of Seoul, is at present more than four millions. Such centring of people in cities, together with the improvement of the standards of living, caused rapid increase in the amount of fuel consumption, and this consumption of fuels became one of the primary sources of the air pollution in cities. Moreover, the heavy traffic, construction of many tall buildings, and the increasing number of new factories due to the industrial development-all these are contributing to make the matter of air pollution worse and worse in the Metropolitan, whose geographical location is quite unfavorable considered from the view point of air pollution. Most homes in Seoul use briquet as fuel, while oils are used in tall buildings. The CO, $SO_2$, and smoke that come from burning of these fuels are a great threat to the health of the urban population. With the purpose of examining the influence of air pollution upon the public health, written inquiries were made upon respiratory diseases, and the carboxyhemoglobin saturation in the blood was measured to determine whether the air pollution may affect the health of the urban population. Method of Health Examination (1) Investigation of Respiratory Diseases Patients' records were examined to figure out the monthly ambulance rate of respiratory patients to the total number of patients treated. On the other hand, by using the questionnaire form approved by the Medical Research Council's Committee on Research into Chronic Bronchitis, investigators interviewed the examinees and inquired into the respiratory symptoms. (2) Measuring of Carboxyhemoglobin Saturation From the ear lobe of the examinees, with the use of the melangeur for the white blood cell counting, blood was taken, and after diluting it ten times with 0.1% $Na{2}CO_{3}$, again diulting it 20 times with 0.5% $Na_{2}\;CO_{3}$, its absorbancy was measured. The following results are obtained from the investigation. (1) It was found out that 7.7% of the total patients under treatment were suffering from upper respiratory infection, acute or chronic bronchitis, bronchial asthma, pulmonary emphysema and bronchiectasis. Of them all, patients with upper respiratory infection numbered the greatest with 4.8% and patients with acute or chronic bronchitis the next with 2.1%, and their monthly ambulance rate was high from December to February during the winter, and from April to May and from September to October during the changeable seasons. (2) The daily ambulance rate of respiratory patients, it was revealed, had a close connection with the concentration of $SO_2$ and CO in the air. (3) It was found out that men were more subject to respiratory disease than women, and both men and women were more liable to the diseases with the advancing of age. (4) People living at Choong-ku with the heavy traffic and in the industrial zones of Yeungdungpo had high frequency of respiratory symptoms. (5) Considered from the view point of occupations, high frequency was found among those without job, with jobs unknown, merchants and intdustrial workers, whose social status was rather low and traffic policemen who were always exposed to the exhaust gas of cars. As for women, the frequency was detected in the order of those from high to low, housewives who were exposed to briquet gas, women with jobs unknown, women without jobs, whose social status was low. (6) Ex-smokers rather than smokers, of both sexes, had higher frequency. As for men, heavy smokers had high frequency, while in women light smokers had rather high frequency which was presumed to be due to their average old age. (7) Men's average of carboxyhemoglobin saturation was 9.48%, while women's was 11.3%, higher than men's. (p<0.05). Age meant no difference in the case of men, but as for women, the saturation was remarkably high between the ages from 20 to 60. (8) No regional difference was detected in the carboxyhemoglobin saturation. (9) The carboxyhemoglobin saturation was found, in the case of men, in the order of office workers, traffic policemen, students, the unemployed, merchants and industrial workers, drivers; and as for women, the order was housewives, office workers, merchants and industrial workers. (10) No significant correlation was found between the carboxyhemoglobin saturation and the concentration of CO detected in kitchens, or between the carhoxyhemoglobin saturation and the passing of time after exposure to briquet gas. No difference of carboxyhemoglobin saturation was detected between smokers and non-smokers, and the degrees of smoking; only, significant negative correlation was found between the passing of time after smoking and the carboxyhemoglobin saturation. It is ture that air pollution causes or aggravates the respiratory diseases, increases the carboxyhemoglobin saturation in the blood, but what seems to be more hazardous to the health is the air polluted by the briquet gas in the kitchens and on-dol rooms rather than the atmospheric air pollution.

  • PDF

Protoporphyrinogen oxidase (Protox) 저해제 저항성 형질전환 벼의 적응성과 Porphyrin 생합성 경로물질과 관련성 (Relationship of Fitness and Substance of Porphyrin Biosynthesis Pathway in Resistant Transgenic Rice to Protoporphyrinogen Oxidase (Protox) Inhibitor)

  • 윤영범;권오도;백경환;이도진;정하일;국용인
    • 한국잡초학회지
    • /
    • 제31권2호
    • /
    • pp.134-145
    • /
    • 2011
  • Myxococcus xanthus (MX, PX)와 Arabidopsis thaliana (AP37)의 protoporphyrinogen oxidase (Protox)유전자 과다발현 제초제 저항성 형질전환 벼와 비형질전환벼의 생육 및 수량에 관한 적응성 차이와 벼생육시기별 ALA 합성능력, tetrapyrrole 중간물질, 활성산소 발생, 지질과산화 작용 및 항산화효소 능력의 연관성이 조사되었다. Protox 과다발현 형질전환 벼 MX와 AP37의 초장은 이앙 후 43, 50, 65일에 비형질전환벼 비형질전환벼에 비해 유의적으로 적었고, 분얼수는 이앙 후 50일과 65일에 MX와 AP37 뿐만 아니라 PX에서도 비형질전환벼에 비해 유의적으로 적었다. 수확기의 간장과 수량은 MX, PX 및 AP37에서 그리고 고건중은 MX와 AP37에서 비형질전환벼에 비해 유의적으로 적었다. 형질전환벼 계통 MX, PX 및 AP37의 수량감소는 MX의 경우 영화수와 천립중에 의해, PX는 등숙율에 의해, AP37은 영화수, 등숙율 및 천립중에 의해서 기인되었다. 한편, 형질전환벼 계통 MX, PX 및 AP37의 수량감소는 또 다른 년차변이 연구에서도 관찰되었다. 이러한 형질전환벼계통의 생육 감소는 이앙 후 생육기간 뿐만 아니라 이앙 전 육묘기간 동안에서도 발생하여 결과적으로 수량이 감소되는 것으로 생각된다. Tetrapyrrole 중간물질 Proto IX, Mg-Proto IX 및 Mg-Proto IX monomethyl ester의 축적량, 활성산소종($H_2O_2$${O_2}^-$), MDA, 및 항산화효소(superoxide dismutase, caltalase, peroxidase, ascorbate peroxidase, glutathione reductase) 및 엽록소 함량은 Protox 유전자 과다발현형질전환벼 계통과 비형질전환벼간에 유의적인 차이가 없어 이들 porphyrin 대사 경로 물질과 벼 생육 및 수량감소의 연관성은 적은 것으로 사료된다. 그러나 MX, PX, AP37의 ALA 합성능력은 광노출 후 1일과 이앙 후 52일에 비형질전환벼에 비해 유의적으로 감소하여 이 부분에 대한 상세한 연구가 추후에 수행되어야 할 것으로 보인다.

직장인의 직무만족도 관련요인 분석 - NIOSH의 직무스트레스 모형을 적용하여 - (Factors Related with Job Satisfaction in Workers - Through the Application of NIOSH Job Stress Model -)

  • 김순례;이복임;이종은;이경용;정혜선
    • 지역사회간호학회지
    • /
    • 제14권2호
    • /
    • pp.190-199
    • /
    • 2003
  • This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

  • PDF

Progress of Composite Fabrication Technologies with the Use of Machinery

  • Choi, Byung-Keun;Kim, Yun-Hae;Ha, Jin-Cheol;Lee, Jin-Woo;Park, Jun-Mu;Park, Soo-Jeong;Moon, Kyung-Man;Chung, Won-Jee;Kim, Man-Soo
    • International Journal of Ocean System Engineering
    • /
    • 제2권3호
    • /
    • pp.185-194
    • /
    • 2012
  • A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

오리엔탈 나리 '시베리아' 절화의 포장내 건식저장 기간별 수분함량과 품질 변화 (Changes in Moisture Content and Quality of Oriental Hybrid Lily (Lilium oriental cv. Siberia) Cut Flowers during Storage at Cold and Dry Condition and Subsequent Exposure to Ambient Temperature)

  • 이정수;이주희;강윤임;최지원
    • 한국포장학회지
    • /
    • 제23권1호
    • /
    • pp.27-36
    • /
    • 2017
  • 오리엔탈 나리 '시베리아'의 건식저장 기간에 따른 절화 보존 시 수분함량 변화와 절화수명을 구명하고자 하였다. 본 실험에서 저장 기간에 따라 저온 저장($5^{\circ}C$)을 한 다음 절화수명에 관계된 수분 및 품질 변화와 개화 정도를 검토하여 '시베리아' 나리의 절화 수확 후 관리 기술에 관계된 기본적인 자료를 얻고자 하였다. '시베리아' 나리를 채화하여 저온에서 건식저장 기간에 따라 3일, 6일, 12일한 후 절화보존 동안에 생체중 변화, 수분균형, 개화정도 등을 조사하였으며 대조구로서 상온 건식저장과 비교하였다. 저온 건식저장 후에 '시베리아' 나리의 수분함량은 건식저장 기간에 영향을 받아 저장하는 기간이 짧을수록 높아져 저장 3일이 다른 처리구보다 높아지는 경향을 보였다. 꽃의 수분함량은 절화보존 시 지속적으로 증가하는데, 저장 기간이 짧을수록 수분이 높게 유지되었다. 생체중 변화는 건식저장 기간에 영향을 받아 저장 기간이 짧았던 것에서 생체중의 증가 정도가 컸으며 음(-)의 값에 이르는 기간이 늦어지는 것으로 나타났다. 또한 절화보존 시 생체중 변화는 저온 건식저장 3일이 생체중 증가 정도가 완만하게 변하며 수분균형도 8일째에 음(-)의 값에 도달하는 것으로 나타났다. 그러나 저장 온도 차이에 따른 생체중 변화는 상온에서 저장한 절화가 저온저장보다 증감 정도가 더 빠른 것으로 나타났다. 개화정도는 '시베리아' 나리의 건식저장 기간이 길어질수록 개화시기가 빨라지며, 절화가 빨리 시들어 상품으로써 유지 기간이 짧아졌다. 개화상태를 비교해 보면 3일 저온 건식저장이 다른 처리보다 개화하는 속도가 늦었으나 절화수명은 다른 처리구보다 길게 나타났다. '시베리아' 나리의 저온 건식저장은 저장 기간이 짧을수록 저장 후 수분함량이 높고 수분 균형값이 음(-)에 늦게 도달하였으며 개화상태가 좋고 절화수명도 길어지는 것으로 나타났다. '시베리아' 나리는 건식저장을 통한 작물체내 수분 함량 감소가 절화보존 시 개화 특성에도 영향을 미쳐 저장기간이 길수록 절화수명이 감소하여 상품 가치를 떨어뜨렸다. '시베리아' 나리 절화를 소비자가 이용 시, 상품 가치 유지를 위해서는 기존 결과의 6일 동안 저온 건식저장도 절화수명을 단축시키므로 저장 기간을 최소화하는 것이 절화 품질 유지를 위해 바람직하다고 판단된다.