• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.173-182
• /
• 2014

The structured singular value (${\mu}$) analysis based method has many advantages for the robust stability analysis of missiles with uncertain parameters. Nevertheless, the present linear fractional transformation (LFT) modeling process, which is the basis of ${\mu}$ analysis, is complex, and not suitable for automatic implementation; on the other hand, ${\mu}$ analysis requires a large amount of computation, which is a burden for large-scale application. A constructive procedure, which is computationally more efficient, and which may lead to a lower order realization than existing algorithms, is proposed for LFT modeling. To reduce the calculation burden, an analysis method is developed, based on skew ${\mu}$. On this basis, calculation of the supremum of ${\mu}$ over a fixed frequency range converts into a single skew ${\mu}$ value calculation. Two algorithms are given, to calculate the upper and lower bounds of skew ${\mu}$, respectively. The validity of the proposed method is verified through robust stability analysis of a missile with real uncertain parameters.

• 한국조경학회지
• /
• 제25권2호
• /
• pp.73-81
• /
• 1997

The main purpose of this study was to develop a new method for evaluation of stream naturalness in order to appraise and prescribe for streams effectively in the process of ecological restoration of stream corridors. The results are as follows : 1) For this purpose six factors were selected on considering the spatial axes of stream corridor variation and total 20 descriptors about the physical structure were selected. 2) The calculation of S.N.I. for each segment was consisted of three steps, such as calculation of S.N.I.s of the individual descriptors, averaging all the descriptors's for each factor, and finally averaging the factors's for the Total S.N.I. 3) The evaluation unit was decided to be 100m size. The score system ranging 1~5 was adopted. Weighting parameters of factors were unified with each other. 4) A GIS model was adopted for classification, calculation, querying, analysing, and presenting S.N.I. information. And the format of S.N.I. maps including statistical graphs and other spatial watershed information was designed for the GIS odel. The naturalness of stream corridor was was investigated by the naturalness of habitat, and assessed by the descriptors focused on physical structure, therefore the S.N.I. can manifest prescriptions for restoration of the stream corridor. On the other hand because some evaluation factors such as water quality, water volume, fauna, flora, functions of stream exosystem has been excluded, S.N.I. could have some limits on representing the full aspects of stream naturalness. This evaluation method is hypothetical one, so it would be investigated through iterative applicatons.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.785-794
• /
• 2005

Modern ship hulls of large oil carriers and container carrers have become more flexible with scantling optimization and increase in ship length. On the other hand. as the demand for power has increased with the ship size. shaft diameters have become larger and stiffer. Consequently. the alignment of the propulsion system has become more sensitive to hull girder deflections. resulting in difficulties in analyzing the alignment and conducting the alignment procedure. Accordingly. the frequency of shaft alignment related bearing damages has increased significantly in recent years. The alignment related damages are mostly attributed to inadequate analyses. changes in the design of the vessel. shipyards' practices in conducting the alignment. and a lack of well defined analytical criteria. The hull deflections should be considered at the design stage to minimize the bearing damage caused by hull deflection. Hull deflections can be estimated by analytical approach and reverse calculation using the measured data. The hull girder deflection analysis using the reverse calculation will be introduced in this paper.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.159-166
• /
• 2016

Purpose: The architectural structures in the engineering field include more than one material, and the heat transfer through these multiple materials becomes complicated. More or less, the analytic solutions obtained by the hand calculation can provide the limited information of heat transfer phenomena. However, the engineers have generally been forced to obtain reliable results than those of the hand calculation. The numerical calculation such as a finite volume methods with the unstructured grid system is only the suitable means of the analysis for the complex and arbitrary domains that consists of multiple materials. In this study, a new numerical code is developed to provide temperature distributions in the multiple material domains, and the results of this code are compared with the validation cases in ISO10211. Method: Finite volume methods with an unstructured grid is employed. In terms of numerical methods, the heat transfer conduction coefficient is not defined on the surface of the cell between different material cells. The heat transfer coefficient is properly defined to accurately mimic the heat transfer through the surface. The boundary conditions of heat flux considering radiation or heat convection are also developed. Result: The comparison between numerical results and ISO 10211 cases. We are confirmed that the numerical method provides the proper temperature distributions, and the heat transfer equation and its boundary conditions are developed properly.

• 에너지공학
• /
• 제16권3호
• /
• pp.103-112
• /
• 2007

국내 1970년대에 설계 및 건설된 원자력발전소에 대해 침수분석을 수행한 결과 기기냉각수펌프 및 열교환기 건물, 주/보조건물, 중간건물 주증기 헤더 격실, 중간건물 주급수관 지역 및 하부층 등이 침수사고에 매우 취약하며 발전소 안전정지능력을 저해할 정도로 침수 영향이 심각한 것으로 판명되었다. 이들 지역에서의 침수원은 주급수관 파단이다. 현재 원자력발전소 내환경기기검증에서 주급수관 파단 방출량 계산은 수계산(Hand calculation)방법으로 Henry-Fauske 임계유량 모델 사용하고 있다. 이 방법은 배관파단 위치에서의 차압으로 계산되며, 실제 원자력발전소의 각종 제어로직에 의한 격리신호를 반영하지 못하므로 지나치게 보수적으로 파단 방출유량이 계산된다. 이러한 문제점을 개선하기 위해 원자력발전소 열수력계통 해석 전산코드인 RETRAN을 사용하여 원자력발전소 일/이차측 계통과 제어로직을 모사하고, 주급수관 파단 방출량 분석을 위한 입력가정과 해석방법을 개발하였다. 침수위 분석은 웨스팅하우스형 원자력발전소 격납건물 외부 하부격실에 대해 적용하였다. 전산코드 해석에서 각종 제어계통과 로직을 고려하였으며, 가장 제한적 사고조건을 계산하기 위해 노심출력, 파단형태, 면적, 위치 등의 조합으로 구성된 18개 사고 사례를 분석하였다. 그 결과 가장 제한적 사례 분석에서는 기존 수계산 분석에서보다 파단 방출유량이 크게 줄었고, 하부격실의 침수위도 상당히 낮아졌다.

• Earthquakes and Structures
• /
• 제11권1호
• /
• pp.1-23
• /
• 2016

Numerous buildings have been damaged or destroyed in previous earthquakes by developing soft storey. Almost all the seismic codes have provisions to prevent soft storey in structures, most of them have recommended the ratio of stiffness between adjacent storeys, but none of them has proposed the method to calculate the storey stiffness. On the other hand a great number of previous researches on stiffness have been focused on approximate methods and accurate methods by using analytical softwares have been almost neglected. In this study, six accurate methods for calculating the storey stiffness have been studied on 246 two-bay reinforced concrete frames. It is shown with the results of the statistical study and structural analysis that method 3 in which there is no modification of the original model and the forces with triangular distribution similar to seismic forces are applied to the center of mass of all storeys has acceptable accuracy and desirable efficiency for designing and controlling structures.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1223-1231
• /
• 2018

The direct torque control (DTC) scheme features a simple structure thanks to stator flux-oriented control. It has the advantage of robustness against motor parameters variation since only the stator resistance is involved in the control scheme. On the other hand, the disadvantage of DTC is large torque ripple. To reduce the torque ripple, many studies on DTC-space vector modulation (DTC-SVM) schemes, which modulate the duty ratio with a fixed switching cycle, have been proposed. However, there is the difficulty in obtaining the duty ratio for DTC-SVM. Hence, this paper proposes a new duty ratio selection and stator flux calculation methods for reducing torque ripple. Simulations and experiments were carried out to determine the validity of the proposed method. The proposed scheme has simplified the duty ratio command and achieved the same control performance as the conventional duty ratio modulation method without using the information of motor parameters.

• 한국광물학회지
• /
• 제3권2호
• /
• pp.89-97
• /
• 1990

To examine how London energy controls the c-dimensions of phyllosilicates, London energy, as well as Coulomb and Pauli repulstion energy was calculated as a function of d(001) for 1M and d(002) for 2M 1 phyllosilicates. London and Pauli repulstion energy calcualtion use a direct interaction calculation method and Coulomb energy calculation adopts Fourier synthesis method. The energy calculations show that Coulmb and Pauli repulsion energy dominantly control the c-dimensions of phyllosilicates having the interlayer cationss, i.e., the layer charges. On the other hand, if phyllosilicates have no interlayer cations, London energy is solely responsible for holding the layers and maintain the c-dimensions. The significance of London energy in determining the c-dimensions of phyllosislicates de-creases as the layer charge increases. When the layer charge is lower than one equivalent on the basis of Oη(OH)2 formula, London energy plays an important role in determing the c-dimensions. however, if the layer charge is higher than one equivalent, London energy becomes insignifi-cant in determining the c-dimension.

• 한국해양공학회지
• /
• 제19권5호
• /
• pp.1-15
• /
• 2005

The motion behaviors including hydrodynamic interaction and mechanical coupling effects on multiple-body floating platforms are simulated by using a time domain hull/mooring/riser coupled dynamics analysis program. The objective of this study is to evaluate off-diagonal hydrodynamic interaction effects and mechanical coupling effects on tandem moored FPSO and shuttle taker motions. In the multiple-body floating platforms interaction, hydrodynamic coupling effects with waves and mechanical coupling effects through the connectors should be considered. Thus, in this study, the multiple-body platform motions are calculated by Combined Matrix Method (CMM) as well as Separated Matrix Method (SMM). The advantage of the combined matrix method is that it can include all the 6Nx6N full hydrodynamic and mechanical interaction effects among N bodies. Whereas, due to the larger matrix size, the calculation time of Combined Matrix Method (CMM) is longer than the Separated Matrix Method (SMM). On the other hand, Separated Matrix Method (SMM) cannot include the off-diagonal 6x6 hydrodynamic interaction coefficients although it can fully include mechanical interactions among N bodies. To evaluate hydrodynamic interaction and mechanical coupling effects, tandem moored FPSO and shuttle tanker is simulated by Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The calculation results give a good agreement between Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The results show that the Separated Matrix Method (SMM) is more efficient for tandem moored FPSO and shuttle tanker. In the numerical calculation, the hydrodynamic coefficients are calculated from a 3D diffraction/radiation panel program WAMIT, and wind and current forces are generated by using the respective coefficients given in the OCIMF data sheet.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1997년도 한국감성과학회 연차학술대회논문집
• /
• pp.57-62
• /
• 1997

The purposse of this study is to evaluate the effect of mechanical properties on handle of fabrics for some of the korean women's clothes, 160 different kinds of commercial silk and polyester fabrics were used for this study. Mechanical properties were measured by the KES-FB fabric testing systems and six hand judgements. and also, the technique of stepwise-block-regression method was applied to investigate relationship between sensory and mechanical properties. Finally, we have obtained useful formulas for calculation the hand valuer of fabrics for korean clothes.