• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.13-18
• /
• 2004

It is important to estimate the distribution of intensity of a magnetic field for application of magnetic method to industrial nondestructive evaluation. Magnetic camera provides the distribution of a quantitative magnetic field with homogeneous lift-off and same spatial resolution. Leakage magnetic flux near the crack on the specimen could be amplified by 3-dimensional magnetic fluid and zoom in and out of measurement area. This study introduces the experimental consideration of the effects of lens for concentrating of magnetic flux. The experimental results showed that the magnetic fluid has sufficient lens effect for magnetic camera and effect of improvement in probability of detection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8306-8313
• /
• 2015

Open-type current sensors have been commonly used for DC motor controller, AC variable controller and Uninterruptible Power Supply. Recently they have begun to be used more widely, as the growth of renewable energy and smart-grid in power system. Considering most of the open-type current sensors are imported, developing the core technology needed to produce open-type current sensors is required. This paper describes the development and test results of open-type current sensors. Design of C type magnetic core, selection and test of a Hall sensor, design of current source circuit and signal conditioning circuit are described. 100A class DIP(Dual In-line Package) type and SMD(Surface Mount Devide) type open-type current sensors was made and tested. Test results show that the developed open-type current sensor satisfies the accuracy requirement of 2% and linearity requirement of 2% at 100 A of DC and AC current of 60Hz. Temperature compensation was carried out by using a temperature compensation circuit with NTC(Negative Temperature Coefficient) thermistor and the effect of the temperature compensation are described.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.914-919
• /
• 2004

When the motor is rotating, the torque and rpm are varying as the loads or the driving status connecting through reduction units are changing. On the contrary, one can monitor the changes of the loads or the driving status in the manner of measuring motor torque and rpm. There is a torque measuring method using the strain gauge and bridge circuit. But, because this is the contact method, it has the life time which is dependent on rotating velocity and used time. So this system demands on replacement of some Parts or whole system itself for maintenance. And this system is also relatively big and expensive, requiring preceding annoying process. In this paper, we are going to suppose non-contact method to measure torque and rpm using the Hall effects sensor For this we have made the planetary geared reduction motor with Hall sensors and with the monitoring system. The monitoring system displays the sensing data(torque, rpm) and calculated data( power) and also has the network capability with Bluetooth protocol. Our solution is much more inexpensive ;md simple method to measure torque and rpm than before.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.4
• /
• pp.78-87
• /
• 1997

In machine tools, frictional force exists between the table and the guideways, and in ballscrews. In this paper, feed motor current measured by a hall sensor is used to calculate the motor torque. Some frictional phenomena are studied in feed drive systems, such as the relationship between feedrate and frictional torque, and chip cover effects on frictional torque. Considering frictional phenomena, the relation- ship between the feed froce and the feed motor current id obtained. Feed force can be well estimated by feed motor current measurement considering frictional behavior. The relationship between the cutting force and the feed motor current is slightly different between up milling and down milling due to the effect of y direc- tional cutting force on frictional torque.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.201-204
• /
• 2004

감속기가 사용되어지는 경우 부하의 변동이나 구동부의 상태변화에 따라 모터의 토크, 회전수 등이 변하는데 이러한 값들을 모니터링 하면 부하의 변동이나 구동부를 진단할 수 있다. 본 논문은 유성기어를 이용한 기어드 모터를 제작하고, LCD를 포함하는 간단한 사용자 인터페이스를 통해 전달 Torque, 전달회전수(rpm), 전달동력을 확인할 수 있는 소형의 표시기가 있는 감속기에 관한 것이다. 일반적으로 전달 토크를 측정하는 장비는 크기가 크고 고가이며 계측기를 연결하고 측정하는 과정이 매우 번거로울 뿐만 아니라 지속적인 유지보수가 필요한 단점이 있다. 본 논문에서 제안하는 유성기어를 사용하면 간단히 모터의 토크 및 회전수를 측정할 수 있고 측정값을 표시하는 표시기를 모터에 부착할 수 있다. 측정 및 표시기는 기존 가격에 비해 매우 값싸게 제작할 수 있고 유지보수가 필요 없으며 검출 값을 시스템 제어부에 피드백 시키면 자기진단이 가능해진다. 특히 블루투스를 이용한 무선 통신기능을 부과하면 원격 모니터링이 가능하고 복수 모터유닛의 네트워크 구성이 용이하며 인터넷을 통한 데이터 통신으로의 확장이 가능하다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.979-982
• /
• 2003

In this study, because of change in electromagnetic force, deformation of the free surface motion of a magnetic fluid is changed. Deformation of the free surface motion of a magnetic fluid for the change in electromagnetic force is discussed and carried out theoretically and experimentally on the basis of Rosensweig Ferrohydrodynamic Bernoulli Equation. Objective of this study explicates free surface motion by electromagnetic force and planes to designed controller. To control free surface of magnetic fluid, it embody designed two-dimensional free surface form of magnetic fluid. By using this characteristics, they applied to oscillator for surface control, flow control, boundary layer control. Strength of magnetic field and height of free surface of magnetic fluid measure as a hall-effect sensor. As performing height control of magnetic fluid, the result will be presented possibility of free surface deformation control.

• Geomechanics and Engineering
• /
• v.23 no.4
• /
• pp.381-392
• /
• 2020

The difficulties, challenges and limitations faced in standard pressuremeter testing in the measurement of low soil deformations led a number of researchers to think about the possible modification of the equipment, and especially the replacement of the volumeter by a Hall Effect sensor. This article is a major contribution in this direction. It makes an attempt to detail the design, manufacture and operation of the new equipment. The calibration of the various components was carried out according to the rules presently in force. This proposal was applied, on an exploratory basis, to the data of a real site located in France. The authors present the preliminary results of some cyclic pressuremeter tests, previously carried out in the laboratory, on a sandy material, and they then provide a basic interpretation of these results. The findings indicated that the proposed apparatus is capable of providing high-quality information about constraints and deformations. Although these tests were performed within the laboratory, it was possible to analyze the power, quality, performance and insufficiencies of the proposed equipment.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.256-258
• /
• 2003

This paper deals with the development of the PMSM(Permanent magnet synchronous motor) system for the electrical actuator, For the high control performance and reliability of PMSM, accurate information of rotor position is essential. Most of PMSM for the position control use the encoder or resolver for the information of rotor position. But these are very expensive. So, in this paper, using of the magnetic and linear hall-effect sensor is proposed. It can reduce the cost of motor systems and get the good performance of PMSM control.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1413-1415
• /
• 1994

A novel magnetotransistor using a separated drift field with the guard ring around the emitter has been designed and fabricated. The operating principle of the proposed magnetic field sensor is based on the emitter injection modulation. The $p^+$ guard ring around the n-type emitter confines drifted electrons in the emitter, hence the induced Hall voltage in the emitter is increased. The measured relative sensitivity of the separated drift magnetotransistor with the guard ring is about 100 times larger than that without the guard ring.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.53-57
• /
• 1992

We report the crystal growth and the electro-optic characteristics of $CdS_{1-x}Se_{x}$ thin films. $CdS_{1-x}Se_{x}$ thin films wire deposited on the alumina plate by electron beam evaporation technique in pressure of $1.5{\times}10^{-7}$ torr, voltage of 4kV, current of 2.5mA and substrate temperature of $300^{\circ}C$. The deposited $CdS_{1-x}Se_{x}$ thin films were proved to be a polycrystal with hexagonal structure through X-ray diffraction patterns. $CdS_{1-x}Se_{x}$ photoconductive films showed high photoconductivity after annealing at $550^{\circ}C$ for 30 minutes. And the films have been investigated the Hall effect, photocurrent spectra, sensitivity, maximum allowable power dissipation and response time.