• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.263-266
• /
• 2004

The stochiometric mix of evaporating materials for the $ZnGa_2Se_4$ single crystal thin films were prepared from horizental furnace. The polycrystal structure obtaind from the power x-ray diffraction was defect chalcopyrite. The lattice costants $a_0\;and\;c_0\;were\;a_0=5.51\;A,\;c_0=10.98\;A$. To obtains the single crystal thin films, $ZnGa_2Se_4$ mixed crystal were deposited on throughly etched Si(100) by the Hot Wall Epitaxy (HWE) system. The temperates of the source and the substrate were $590^{\circ}C\;and\;450^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der Pauw and studied on carrier density and mobility dependence on temperature. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to dark current(pc/dc), maximum allowable rower dissipation(MAPD), spectral response and response time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.381-384
• /
• 2004

The stochiometric nix of evaporating materials for the $AgInS_2$ single crystal thin films were prepared from horizontal furnace. The polycrystal structure obtaind from the power x-ray diffraction was chalcopyrite. The lattice costants $a_0\;and\;c_0$ were $a_0=5.86(5.82)\;A,\;c_0=11.355(11.17)\;A$. To obtains the single crystal thin films, $AgInS_2$ mixed crystal were deposited on throughly etched GaAs(100) by the Hot Wall Epitaxy(HWE) system. The temperates of the source and the substrate were $590^{\circ}C\;and\;450^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der Pauw and studied on carrier density and mobility dependence on temperature. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to dark current (pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.357-362
• /
• 2007

AZO(Aluminum-doped Zinc Oxide) films are attractive materials as transparent conductive electrode because they are inexpensive, nontoxic and abundant element compared with ITO(Indium Tin Oxide). AZO films have been deposited on glass (corning 1737) substrates by RF magnetron sputtering. The AZO film was post-annealed at $600^{\circ}C$ for 2 hr with $N_2$ atmosphere. The AZO films were used as an anode contact to fabricate OLEDs(Organic Light Emitting Diodes). OLEDs with $AZO/TPD/Alq_3/Al$ configuration were fabricated by thermal evaporation. We investigated that the electric, structural and optical properties of AZO thin films, which measured using the methods of XRD, SEM, Hall measurement and Spectrophotometer. The current density-voltage and luminescence-voltage properties of devices were studied and compared with ITO devices fabricated under the same conditions.

• International Journal of Advanced Culture Technology
• /
• 제9권3호
• /
• pp.277-282
• /
• 2021

The generalization of social distancing due to the COVID-19 pandemic has rapidly spread non-face-to-face services, accelerating the speed of non-face-to-face digital conversion technology. The importance of telemedicine, a remote service, has been rekindled in the wearable technology including the medical industry. In a situation where it is not easy for any company to overcome the COVID-19 pandemic, it is a time when collaboration within the industry or between competitors is necessary. In addition to the digital-based online exhibition hall using AR-VR-MR technology, which is a major core technology of the future industry, virtual stores that can receive services such as actual shopping should be actively used. Paradoxically COVID-19 will provide new opportunities to reshape and reconnect the future of the textile and fashion industry. Therefore, the purpose of this study is to investigate the current status of wearable technology products being developed as fashion items for the prevention of COVID-19 and analyze their characteristics. This study results can be used as basic data for future research on the fashion industry and education.

• 인간식물환경학회지
• /
• 제21권6호
• /
• pp.493-500
• /
• 2018

The distribution of standing wreaths has reached about 7.1 million per year and the size of the standing wreath market is estimated to be at least 700 billion won. Among them, 20 to 30 percent are estimated to be reused, resulting in damage to flowerfarms' sales of 110 to 160 billion won per year. Due to the unique characteristics of conventional 3-tier standing wreaths in terms of transportation and installation, companies that lack design expertise have monopolized local distribution markets, and the issue of illegally using standing wreaths has been raised. These issues have highlighted the need for developing new designs and establishing a distribution system to expand the consumption of flowers. This study was carried out to identify consumers' perception of reused standing wreaths and the current systems introduced to prevent the distribution of reused standing wreaths such as the real-name standing wreath production system, the authenticity certificate system, and new standing wreaths. The results of a consumer survey showed that consumers' perception of reused standing wreaths has been high and that reused standing wreaths need to be actively regulated to establish fair trade order and protect consumers' rights. Although the effectiveness of the real-name system, the authenticity certificate system, and new standing wreaths was found to be insufficient, the introduction of these systems was essential and necessary for continuous promotion through broadcasting media.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.33-39
• /
• 2019

We report development of a frequency-stabilized mid-infrared continuous-wave (cw) optical parametric oscillator (OPO) based on a fan-out grating MgO:PPLN crystal pumped at 1064 nm. The OPO resonator was designed as a pump-enhanced standing-wave cavity that resonates to the pump and signal beams. To realize stable operation of the OPO, we applied a modified Pound-Drever-Hall technique, which is a well-known method for powerful laser frequency stabilization. Tuning a poling period of the fan-out grating of the crystal allows wavelength-tunable OPO outputs from 1510 nm to 1852 nm and from 2500 nm to 3600 nm for signal and idler beams, respectively. At the idler wavelengths of 2500 nm, 3000 nm and 3500 nm, we achieved more than 50 mW of output powers at a pumping power of 1.1 W. The long-term stability of the OPO was confirmed by recording the power and wavelength variations of the idler for an hour.

• 한국초등과학교육학회지:초등과학교육
• /
• 제37권4호
• /
• pp.352-362
• /
• 2018

With the advent of the 4th industrial revolution, the educational innovation focusing on the key competencies is occurring in the whole world. In September 2015, the Ministry of Education suggested six key competencies such as self-management competency, knowledge/information processing competency, creative thinking competency, aesthetic sensibility competency, communication competency, and community competency for the 2015 revised national curriculum. Also, this era requires for diverse lessons like subject integrated/converged lesson and intramural/extramural education. Thus, the objective of this study is to research/analyze exhibitions of Busan National Science Museum as extramural educational institute and to relate between the 2015 revised curriculum and exhibitions of science museum. First, the exhibitions of permanent exhibition hall in Busan National Science Museum were researched/analyzed. It analyzed the current status, display type, and explained contents of exhibitions. Second, it analyzed the relations between contents of the exhibition and key competencies in the 2015 revised curriculum. Third, the 2015 revised curriculum for the 3rd and 6th grade related to the selected exhibition contents was analyzed. The analysis on the exhibition contents performed by this study would be helpful for follow-up researches connected to exhibitions of Busan National Science Museum.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.31-35
• /
• 2018

Tungsten disulfide($WS_2$) thin films were directly deposited by direct-current(DC) sputtering and annealed by rapid thermal processing(RTP) to materialize two-dimensional p-type transition metal dichalcogenide (TMDC) thin films on soda-lime glass substrates without any complicated exfoliation/transfer process. $WS_2$ thin films deposited at various DC sputtering powers from 80 W to 160W were annealed at different temperatures from $400^{\circ}C$ to $550^{\circ}C$ considering the melting temperature of soda-lime glass. The optical microscope results showed the stable surface morphologies of the $WS_2$ thin films without any defects. The X-ray photoelectron spectroscopy (XPS) results and the Hall measurement results showed stable binding energies of W and S and high carrier mobilities of $WS_2$ thin films.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.374-375
• /
• 2019

In this paper, In the whole industry, there is a tendency to replace brushless motors with brushless motors because of the high rate of failure in DC motors with brushes. Accordingly, many methods for driving a brushless motor have been developed and studied. In order to drive the brushless motor, it is essential to know the information about the rotor position of the motor. However, it is not possible to use a position sensor for rotor disconnection due to the structure of an electric compressor brushless DC motor. In this paper, we investigate the rotor position of the motor by using the counter electromotive force included in the voltage of the terminal made by Y connection by using the resistance of each phase without using Hall sensor or encoder generally used to detect the rotor position. A sensorless drive system for a square wave brushless direct current (DC) motor is proposed. To do this, we propose a method to detect the rotor position from the analyzed terminal voltage waveform by performing terminal voltage analysis of each phase for 3-phase, 2-exciton unipolar PWM.

• 대한건축학회논문집:계획계
• /
• 제35권4호
• /
• pp.15-24
• /
• 2019

Currently, museums and architectural heritage provide augmented user experiences by incorporating various media technologies. They still, however, suffer from the limitation of entertainment-based and the provision of location-based simple and repetitive contents. In addition, while acting as a key medium of experience for architectural heritage, the concept of space is not properly reflected in current services. The purpose of this study is to design user space experience considering such characteristics of architectural heritage. The spatial experience content and content production platform are defined. This software platform creates content that enhances the experience of the place by giving a context-based digital data associated with space and objects. The spatial experience content is designed as a series of experience sequences. The composition of the sequence borrows the method of film and narrative which segment and connect consecutive experiences on a scene basis considering user's detailed spatial experience. Therefore, content components can be combined and reproduced in various types. Augmented contents were extracted by using rule-based reasoning function of ontology at the moment. As a practical example of architectural heritage, the Seokjojeon Hall is used to reveal a spatial experience scenario.