• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.1
• /
• pp.26-32
• /
• 2002

Laser direct patterning of the coated photoresist (PMER-NSG31B) layer was studied to make halftone dots on the gravure printing roll. The selective laser hardening of the photoresist by Ar-ion laser(wavelength: 333.6∼363.8 nm) was controlled by the A/O modulator. The coating thickness in the range of 5∼11㎛ could be obtained by using the up-down directional moving device along the vertically located roll. The width, thickness and hardness of the hardened lines farmed under the laser power of 200∼260mW and irradiation time of 4.4∼6.6 $\mu$ sec/point were investigated after developing. The hardened width increased as the coating thickness increased. Though the hardened thickness was changed due to the effect of the developing solution, the hardened layer showed good resistance to the scratching of 2H pencil. Also, the hardened minimum line width of 10㎛ could be obtained. The change of line width was also found after etching, and the minimum line widths of 6㎛ could be obtained. The hardened lines showed the good resistance to the etching solution. Finally, the experimental data could be applied to make gravure halftone dots using the developed imaging process, successfully.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.37-43
• /
• 2009

In this paper, we proposed that a novel method base on a binary image that technique is proposed for data hiding into binary images and halftone image. A binary image is bitmap image and halftone is composed by two-tone value in a limited region in an image. For this reason, it is not easy to hide messages in binary images. PWLC is a new method to hide a message in binary images. However, it yields images of unacceptable quality, unless you should change very few of it. Therefore, in order to solve this problem, we used run-length method into binary images. That is, we find a proper region to hide messages. In this paper, we proposed new method to hide messages in binary images. In addition, we proved that our algorithm is better than PWLC through the experiment.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.57-76
• /
• 1997

A color halftoning is the process of generating halftone images for the different color plans, for example, cyan, magenta, yellow, and black for a offset printing device. A conventional halftone technique, so called AM screening, is simple and easy to implement, but the halftoned dot patterns by using this method is not free for the moire` fringe. Moire` patterns are caused the power spectrum distribution on low spatial frequency domain. To avoid Moire` patterns, the conventional screen require the different screen angles for each color plans. Recently, Ultra-fine and 7 color printing methods are developed to expend the color gamut. In 7 color printing method must be used the halftone technique of random and blue noise characteristic to avoid Moire` fringe.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.258-260
• /
• 2008

Developed halftone exposure technique was successfully applied to the fabrication of narrow transistor channels below $4\;{\mu}m$ with conventional photolithography method. Asymmetric slits concept of photo mask was applied to make channel lengths (L) shorter for thin film transistor's (TFT) high performance. These short channel TFTs verified better quality transistor characteristics.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.465-467
• /
• 1992

This paper shows 3D vision system based on halftone image analysis. Any halftone image has its own surface vector normal to surface patch. To classily the given 3D images, all the patch on 3D object are transformed to black/white halftone. First we extract the general learning patterns which represents required slopes and their attributes. And next we propose 3D segmentation by searching intensity, slope and density. Artificial neural network is found to be very suitable in this approach, because it has powerful learning quality and noise tolerant. In this study, 3D shape reconstruct using pyramidian model. Our results are evaluated to enhance the quality.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.21-36
• /
• 1996

With increased use of halftone dot overprints for offset color printing, it is important to study the density and ink trap of the overprints. In this research the equation to predict the density and the method to evaluate ideally the fractional ink trap are preposed. And also the halftone dot overprinting experiments of Magenta over Cyan or Cyan over Magenta under wet-on-wet or wet-on-dry overprinting using 2-color offset press show the above proposals are reasonable, and show the effect of overprinting sequence on the density and ink trap.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.96-104
• /
• 2011

A halftoning method is used to obtain a binary image visually similar to a continuous gray-level image through the image output devices employing the limited number of gray-levels. As a halftoning method, the error diffusion method is widely used in various applications because of its low computational complexity and good image quality. However, this method weakens the edge in the process of error diffusion to the neighboring pixels. In this case, degradation of the edge quality and damage of the vivid image is expected. To solve these problems, the proposed method determines the adaptive error filter considering the error information of the present pixel and edge distribution of the neighbor pixels. Compared with the conventional methods for enhancing edges, the proposed method involves relatively a few process resources because of its simple procedure, still considerably improving the edges in the halftone image. To evaluate the objective image quality, the performance of the proposed method is compared with that of the conventional method in terms of the edge correlation and the local average accordance.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.191-198
• /
• 2000

Laser direct patterning of the coated photoresist (PMER-NSG31B) layer was studied to make halftone dots on gravure printing roll. The selective laser hardening of photoresist by Ar-ion laser(wavelength: 333.6~363.8nm) was controlled by the A/O modulator. The coating thickness in the range of 5~11$\mu m$ could be obtained by using the up-down directional moving device along the vertically located roll. The width, thickness and hardness of the hardened lines formed under the laser power of 200~260㎽ and irradiation time of 4.4~6.6 $\mu$sec/point were investigated after developing. The hardened width increased as the coating thickness increased. Though the hardened thickness was changed due to the effect of the developing solution, the hardened layer showed good resistance to the scratching of 2H pencil. Also, the hardened minimum line widths of 10$\mu m$ could be obtained. The change of line width was also found after etching, and the minimum line widths of 6$\mu m$ could be obtained. The hardened lines showed the good resistance to the etching solution. Finally, the experimental data could be applied to make gravure halftone dots using the developed imaging process, successfully.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.2
• /
• pp.405-424
• /
• 2013

In publishing applications, it is advantageous to embed data in halftone images. The CPT scheme (Chen-Pan-Tseng, 2000) is a steganographic data hiding scheme that was proposed for binary images, e.g., facsimiles. The CPT scheme uses a secret key and weight matrix to protect the hidden data and can hide as many as $r={\lfloor}{\log}_2(m{\times}n+1){\rfloor}$ bits of data in the image by changing at most 2 bits in the image. Our proposed scheme also uses a secret key to protect it from being compromised and a weight matrix to increase the data hiding rate. Our scheme improves the performance of the CPT scheme by using the simple principle of splitting each block into two parts. Our proposed scheme is called improved CPT (ICPT) and has a very high embedding capacity compared to previous schemes. Experimental results demonstrate that our proposed scheme generally has higher performance than previous schemes.

• Journal of Korea Multimedia Society
• /
• v.1 no.2
• /
• pp.183-193
• /
• 1998

Color inverse halftoning is the transformation of a color-halftone image to a continuous-tone color image that is more natural in human vision. In this paper, we propose a new smoothing mask that can remove halftone patterns in channel effectively and we apply it to color inverse halftoning. The proposed smoothing mask can make channel images more smooth and natural in human vision than traditional ones. Its characteristic can be adapted automatically according to the various color halftone images. We analyze the result images in various aspects through experiments. Experimental results show that the mask is useful for color inverse halftoning. It can be applied to field of multimedia application, such as desktop publishing, color facsimile and digital library construction.