• Journal of Information Technology Applications and Management
• /
• 제23권2호
• /
• pp.61-80
• /
• 2016

The wireless mesh network (WMN) is a next-generation technology for data networking that has the advantage in cost and the flexibility in its construction because of not requiring the infra-structure such as the ethernet. This paper focuses on the optimal link scheduling problem under the wireless mesh network to effectuate real-time streaming by using the constraint programming. In particular, Under the limitation of half-duplex transmission in wireless nodes, this paper proposes a solution method to minimize the makespan in scheduling packet transmission from wireless nodes to the gateway in a WMN with no packet transmission conflicts due to the half-duplex transmission. It discusses the conflicts in packet transmission and deduces the condition of feasible schedules, which defines the model for the constraint programming. Finally it comparatively shows and discusses the results using two constraint programming solvers, Gecode and the IBM ILOG CP solver.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.481-484
• /
• 2009

본 논문에서는 다중 안테나를 갖는 릴레이 (relay)의 양방향 (full-duplex) 동작을 위한 프리코딩(precoding) 기법을 제안한다. 양방향 릴레이는 기존의 반이중 (half-duplex) 릴레이와 달리 같은 주파수 대역에서 동일한 시간에 송수신을 수행하기 때문에, 릴레이의 송신 안테나로부터 수신 안테나로 유입되는 자기 간섭 (self interference)이 발생한다. 제안한 프리코딩 기법은 이러한 자기 간섭을 블록 대각화 (block diagonalization) 기법을 통해 제거하여 릴레이의 양방향 동작이 가능하도록 한다. 또한, 모의 실험을 통해 양방향 릴레이가 기존의 반이중 릴레이에 비해 향상된 채널 용량을 가짐을 증명한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1311-1324
• /
• 2019

In the traditional cellular network communication, the cellular user and the base station exchange information through the uplink channel and downlink channel. Meanwhile, device-to-device (D2D) users access the cellular network by reusing the channel resources of the cellular users. However, when cellular user channel conditions are poor, not only D2D user cannot reuse its channel resources to access the network, but also cellular user's communication needs cannot be met. To solve this problem, we introduced a novelty D2D communication mechanism in the downlink, which D2D transmitter users as half-duplex (HD) relays to assist the downlink transmission of cellular users with reusing corresponding spectrum. The optimization goal of the system is to make the cellular users in the bad channel state meet the minimum transmission rate requirement and at the same time maximize the throughput of the D2D users. In addition, i for the purpose of improving the efficiency of relay transmission, we use two-antenna architecture of D2D relay to enable receive and transmit signals at the same time. Then we optimized power of base station and D2D relay separately with consideration of backhaul interference caused by two-antenna architectures. The simulation results show that the proposed HD relay strategyis superior to existing HD and full-duplex (FD) models in the aspects of system throughput and power efficiency.

• 한국산업융합학회 논문집
• /
• 제23권1호
• /
• pp.41-48
• /
• 2020

Currently, the industry uses MODBUS communication method using RS485 as a communication method used when constructing distributed equipment and networks. However, this method has a rather good transmission and reception distance, but has a disadvantage of being a half-duplex communication method. Therefore, there is a great need for a full-duplex communication method that can simultaneously transmit and receive two-wire communications. Therefore, in this paper, we propose a new communication hardware equipment that can implement full-duplex communication method by communication signal level to overcome the disadvantage of communication speed. The proposed communication hardware is a structure that can transmit and receive at the same time on the same communication line in two equipments communicating in a two-wire system. The characteristic of this communication hardware is that the transmitter generates two-level signal for data transmission, but the receiver generates three-level electric signal according to the status of the transmission data generated by the receiver. The data transmission signal information of the receiver is present at the same time. Therefore, the receiving side can analyze the received signal based on the information on the current transmission signal and can analyze the signal only in the two communicating devices, so it can be seen that the communication security is very excellent.

• 한국통신학회논문지
• /
• 제36권11A호
• /
• pp.853-860
• /
• 2011

본 논문에서는 전이중 전송 방식을 사용하는 릴레이 전송 시스템의 오수신 확률을 최소화하는 전송 기법을 제안한다. 릴레이국이 전이중 전송 방식으로 동작하면, 단말국이 기지국과 릴레이국으로 받는 신호를 동시에 수신하게 되고, 두 송신국으로부터의 신호는 서로에게 간섭으로 작용하여 성능을 열화시킨다. 이로 인해 시스템의 오수신 확률이 높아지는데, 본 논문에서는 기지국이 레이어드 브로드캐스팅 기법을 적용하여 정보를 송신하고, 이 때 간섭의 양을 고려하여 전송 파워를 최적으로 할당함으로써 시스템의 오수신 확률을 낮추었다. 이를 위해 제안하는 기법의 용량 및 오수신 확률을 수식적으로 유도하였고, 오수신 확률을 최소화 시키는 파워 할당 비율을 제시하였다. 제안된 전이중 전송 방식 및 파워 할당 알고리즘은 추가적인 자원 할당으로 자원의 비효율성을 발생 시키는 반이중 전송 방식의 릴레이 전송 방식에 대한 좋은 해법을 제공할 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.583-585
• /
• 2016

The recent advances in wireless networks area have led to new techniques, such as small cells or full-duplex (FD) transmission, have also been developed to further increase the network capacity. Particularly, full-duplex communication promises expected throughput gain by doubling the spectrum compared to half-duplex (HD) communication. Because this technique permits one set of frequencies to simultaneously transmit and receive signals. In this paper, we focus on the binary power control for the users and the base stations in full-duplex multiple cellulars wireless networks to obtain optimal sum-rate under the effect interference and noise. We investigate with a scenario in there one carrier is assigned to only one user in each cell and construct a model for this problem. In this work, we apply the binary power control by the its simplification in the implemented algorithm for both uplink and downlink simultaneously to maximize sum data rate of the system. At first, we realize the 2-cells case separately to check the optimal power allocation whether being binary. Then, we carry on with N-cells case in general through properties of binary power control.

• Journal of information and communication convergence engineering
• /
• 제12권2호
• /
• pp.67-74
• /
• 2014

In multi-hop communication systems, two-way relaying is one of the solutions to mitigate the spectral efficiency loss caused by a half-duplex transmission. In this paper, a simple two-way relaying scheme is proposed for two-hop two-user multiple input multiple output (MIMO) systems. In the proposed system, a base station and a relay station (RS), both equipped with two antennas, form a point-to-point MIMO channel, while the RS and two single-antenna mobile users form a point-to-multipoint multiuser (MU)-MIMO channel. Numerical examples show that the proposed system achieves a significant sum rate gain as compared to a one-way relaying system as the distance between a relay and the two users decreases. We also show that although we can expand the proposed scheme to more than two users, its performance gain as compared to that of one-way relaying decreases with an increase in the number of users.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권10호
• /
• pp.3887-3907
• /
• 2015

This paper introduces a full duplex single secondary user multiple-input multiple-output (FD-SSU-MIMO) cognitive radio network, where secondary user (SU) opportunistically accesses the authorized spectrum unoccupied by primary user (PU) and transmits data based on FD-MIMO mode. Then we study the network achievable average sum-rate maximization problem under sum transmit power budget constraint at SU communication nodes. In order to solve the trade-off problem between SU's sensing time and data transmission time based on opportunistic spectrum access (OSA) and the power allocation problem based on FD-MIMO transmit mode, we propose a simple trisection algorithm to obtain the optimal sensing time and apply an alternating optimization (AO) algorithm to tackle the FD-MIMO based network achievable sum-rate maximization problem. Simulation results show that our proposed sensing time optimization and AO-based optimal power allocation strategies obtain a higher achievable average sum-rate than sequential convex approximations for matrix-variable programming (SCAMP)-based power allocation for the FD transmission mode, as well as equal power allocation for the half duplex (HD) transmission mode.

• ETRI Journal
• /
• 제40권5호
• /
• pp.582-591
• /
• 2018

In this paper, we present a performance analysis of large-scale multi-input multi-output (MIMO) systems for wireless backhaul networks. We focus on fully connected N nodes in a wireless meshed and multi-hop network topology. We also consider a large number of antennas at both the receiver and transmitter. We investigate the transmission schemes to support fully connected N nodes for half-duplex and full-duplex transmission, analyze the achievable ergodic sum rate among N nodes, and propose a closed-form expression of the achievable ergodic sum rate for each scheme. Furthermore, we present numerical evaluation results and compare the resuts with closed-form expressions.

• 한국정보통신학회논문지
• /
• 제13권4호
• /
• pp.629-635
• /
• 2009

본 논문에서는 하나의 국부 발진기를 갖는 FSK 이중통신 방식의 원격제어 무선 전송부를 설계 제작한다. 전 이중 방식의 FSK 양방향 동시통신 회로에서는 양방향 동시 통신을 위한 송수신 주파수를 설정하고, 반 이중방식에서는 송수신 신호를 발생하는 절체형 발진기 회로를 설계한다. 양 FSK 이중통신 방식의 원격제어 무선 전송부는 채널주파수간 간섭을 배제하기 위한 채널 사용 검지 및 자동 채널 설정 회로를 설계 구현하였으며, 400MHz 대역에서 50kHz 채널 간격을 갖는 위상동기 회로 구성의 Colpitz 형 국부발진주파수 회로와 10mW 이내의 소형 소출력 특성을 갖는다. 전 이중 방식의 송수신 주파수는 21.4MHz IF주파수의 2배 주파수인 42.8MHz주파수 간격으로 설계 구현하였다.