• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.155-161
• /
• 1998

This study reviewed on the occupational health status of female workers in China, where the half of female population are workers in occupational settings and realizes the importance of occupational health among them, to establish the occupational health management system in Korea as Korean female workers have been increasing for the last few decades. Results of the study were as follows. 1. The proportion of female workers in total workers have increased from 7.5% in 1949 up to 37.6% in 1990. As for the distribution of female workers by industry, manufacturing part has the highest proportion of female workers in total and out of total female workers, the rank was health social welfare (53.2%), community personal service(45.4%) and agriculture forestry fishing(44.1%). 2. The system of occupational health management for female workers was related to superior organization well by administrative district & work place and professionals were distributed to one per ten thousand persons or more, depending on each region's conditions. 3. The regulations of occupational health management for female workers are defined in a variety of fields. Considering the physiological characteristics of female workers, government has tried to minimize the loss due to menstruation, pregnancy, delivery and lactation and has let them have vacations, guaranteeing the health facilities at the same time. Also government has defined the scope of prohibited work to protect legal right of them.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.161-168
• /
• 1997

Most plants producing semiconductors use a lot of chemicals, hazardous materials, and explosive gases. Though those materials are hazardous too much, some works still have to be done manually by human workers. However, according to a historical survey, more than half industrial accidents of those plants resulted from human errors or malfunctions. Thus, this research aimed 1) to diagnose shifting hazardous materials of semiconductor plants, 2) to estimate failure probability of human workers through human reliability analysis, and 3) to find out the tasks on which educational emphasis should be put. Through personal interview and visiting working spots, shifting tasks were analyzed, and modelled into a 24-step work, and after that, THERP and ETA was applied. During the shifting work, estimated human failure probability under the assumption of independency, 2.3004E-05, underestimated that probability 8. l008E-05 which could be calculated under the assumption of dependency. And this analysis showed that gas leakage from an old cylinder occupies 78.27% in the case of independent failures whereas gas leakage from a new cylinder occupies 75.06% in the case of dependent failures. So it was concluded that dependency assumption may gloss real situations. In addition, confirming gauge of regulators and closing valves turned out to be the most important tasks than purge tasks.

• Safety and Health at Work
• /
• v.3 no.2
• /
• pp.104-109
• /
• 2012

Singapore, an island republic of over 5 million inhabitants, has 3.1 million workers. Most are employed in the service, finance and tourist/transport industry. Significant numbers work in manufacturing, construction and heavy industry. Following a series of construction and shipyard accidents with multiple deaths in 2004, the government announced its intention to reduce workplace fatalities from 4.9 to 2.5 per 100,000 by 2015. There was strong political will to achieve this target. The strategic approaches were to build workplace safety and health (WSH) capabilities; implement legislative changes with enforcement; promote benefits of WSH and recognize best practices, and enhance partnership with stakeholders. The anticipated outcomes were to reduce workplace fatality and injury rates; have WSH as an integral part of business; and establish a progressive and pervasive WSH culture. With these measures, the workplace fatality rate declined from 4.9/100,000 in 2004, to 2.2/100,000 in 2010. However, other confounding factors could also account for this decline, and have to be considered. The next target, announced by Singapore's Prime Minister in 2008, is to further reduce the workplace fatality rate to 1.8/100,000 by 2018, and to have "one of the best workplace safety records in the world".

• International Journal of High-Rise Buildings
• /
• v.7 no.4
• /
• pp.397-408
• /
• 2018

In a recent tragic fire incident, the Plasco Tower collapsed after an intense outburst of fire lasting for three and a half hours and claiming the lives of 16 firefighters and 6 civilians. This paper will present continuing collaborative work between Hong Kong Polytechnic University and Queen's University in Canada to model the progressive collapse of the tower. The fire started at the 10th floor and was observed to have travelled along the floor horizontally and through the staircase and windows vertically. Plasco Tower was steel structure and all the steel sections were fabricated by welding standard European channel or angle profiles and no fire protection was applied. Four internal columns carried the loads transferred by the primary beams, and box columns were constructed along the perimeter of the building as a braced tube for resisting seismic loading. OpenSees fibre-based sections and displacement-based beam-column elements are used to model the frames, while shell elements are used for the reinforced concrete floor slabs. The thermal properties and elevated temperature mechanical properties are as recommended in the Eurocodes. The results in this preliminarily analysis are based on rough estimations of the structure's configuration. The ongoing work looks at modeling the Plasco Tower based on the most accurate findings from reviewing many photographs and collected data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.529-530
• /
• 2014

Multiplanar image video has been used in various fields advertising, exhibitions, and PR. But the content is applied therein, image synthesis, and graphics in most cases. That for taking pictures become a stock video exactly not only very difficult, to complement work in the second half of the problems of the shooting stage is difficult. Therefore, in this study, and then grasp the problems later work with imaging and attempts to validate the experiment improvements. As the study specific method, it is intended to advance the experiments for determining the distance to minimize the distortion generated at the edges of the image varies with the distance between cameras. It is intended to contribute to the creation of the content of the image-based, which can be utilized more effectively excellence media of the video if to build on this.

• Journal of Korean Biological Nursing Science
• /
• v.21 no.1
• /
• pp.37-45
• /
• 2019

Purpose: This descriptive research was on hand dermatitis in clinical nurses. Nurses often have a high rate of hand dermatitis with several factors associated with the dermatitis. The factors analyzed in this study included; general characteristics, work-related factors, hand washing, and allergies relate to hand dermatitis. Methods: Data were collected from April to May 2016. The subjects were nurses who had worked 12 months or more in a University Hospital. They voluntarily gave their consent for the research. The Symptombased questionnaires were sent to 220 nurses and 199 responses were returned. Collected data were analyzed using frequency, percentage, mean, standard deviation, ${\chi}^2-test$, and logistic regression analysis using SPSS 23.0. Results: Prevalence of dermatitis in nurses was 48.2%. Nurses who had worked for over three years were twice more likely to suffer hand dermatitis than nurses who had worked for 3 years or less (adjusted odds ratio [adj. OR]= 1.97, p= .036). Nurses who used alcohol sponge swabs more than 20 times per shift were 2.5 times more likely to suffer hand dermatitis as compared to those who used them less times (adj. OR = 2.51, p= .023). Conclusion: Results revealed that about a half of the clinical nurses suffered from hand dermatitis, hence it is crucial to find appropriate interventions for dermatitis prevention. This concern needs to be addressed especially in nurses who have more work experience and use more alcohol sponge swabs.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3202-3205
• /
• 2023

The k₀-standardization neutron activation analysis method has successfully determined the mass fraction of elements of interest using around a hundred analytical radionuclides. However, several very short-lived nuclides with half-life less than 100 s have not been used at Dalat research reactor. One of the reasons is that the values of k₀-factors of these nuclides are significantly different. Therefore, this work focused on re-determination and evaluation of k₀-factors of very short-lived nuclides ¹¹⁰Ag (T_1/2 = 24 s) and ^46mSc (T_1/2 = 18.75 s). The results of determination of the short-lived nuclides revealed that k₀-factor of ¹¹⁰Ag is significantly difference between the existing data and the obtained results in this work. The evaluation of the k₀-factors was done by using the obtained results for application of k₀-NAA for NIST-1566b and NIST-2711A standard reference materials.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.6
• /
• pp.501-509
• /
• 2023

Objectives: This study aimed to analyze the relation between factors related to the clinical performance competency of dental hygiene students and their clinical learning environment. Methods: The study conducted a survey of dental hygiene students from October 18 to 30, 2023. The data were analyzed using one way analysis of variance, t-test, and stepwise multiple regression. Results: The total practicum lasted ≤10 weeks, 11-15 weeks, and ≥16 weeks for 41.7%, 33.5%, and 24.8% of the students, respectively. Half of them had experience at only one clinical institution. Clinical learning environment had an average score of 3.46 points, whereas the average clinical performance competency of the participants was 3.60 points. The major influencing factors on clinical performance competency were identified as preceptor' s guidance (β=0.277), work participation opportunities (β=0.213), and perceived importance of clinical practice (β=0.136). Conclusions: Efforts are required to provide students with prior education on the importance of clinical practice, improve the clinical learning environment with a focus on preceptor's guidance and work participation opportunities. And standardize various elements to resolve differences in the practice of clinical institutions across regions.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.3-11
• /
• 2016

Recently, overseas plant orders of domestic enterprises are steadily increased, and the amount of orders in the first half of 2014 were 93% increased compared to the previous year. In addition, now which is the third quarter of 2015, overseas plant orders are already over 249.8 billion dollars so the interests of plant industry research has been increased. In the life cycle of the plant project, CM before the construction stage is to complement the uncertainties that are inherent in the early stages of the project, and from the viewpoint of supporting the rational decision-making, the importance of its role is on the rise. Among them, excavating and investing participation plan in the planning stage is an important work that has a large impact force to influence the success and failure of future project. However, the work has become a problem with frequent consultations due to decision-making, continuous modification, and inefficient repetitive tasks. Therefore, it is needed that work process should be changed to effectively accommodate. The purpose of this paper is to derive the major work items for excavating and investing participation plan in the planning stage of the plant project, and establish a standardized work process through the Delphi analysis. The result of this study is expected to be utilized for EPC companies in ensuring the technical competitiveness in planning on overseas markets, and improve the efficiency of work.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.314-319
• /
• 2007

The aims of this work were to compare the effects of dehairing methods and sex on pork quality and cold storage stability. For this study, one half of40 pigs were dehaired by scalding in the same abattoir, and the other half by dehiding. Each treatment consisted of one half gilts and one half castrated male pigs. Meat quality traits were measured at 24 hr after slaughter, and thiobarbituric acid (TBA), metmyoglobin contents and total plate counts (TPC) were evaluated at 1, 7, 14 and 21 days of cold storage. The carcass weight and backfat thickness of pigs dehaired by scalding were significantly higher than those dehided (p<0.05). Compared to scalded carcasses, dehided carcasses had a lower longissimus dorsi muscle temperature (p<0.05). Furthermore, dehided carcasses had significantly lower drip loss than scalded carcasses (p<0.05). However, meat color parameters were not affected by the dehairing method. During cold storage, TBA values of scalded carcasses were slightly higher initially, whereas the dehided carcasses had higher TBA values at 21 days (p<0.05). The total plate counts (TPC) associated with scalding and dehiding treatment were not significantly different at any point during cold storage. The TPC exponentially increased in both scalded and dehided carcasses from 7 to 14 days of cold storage.