• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.121-128
• /
• 2023

Construction industry is considered as one of the most high-risk industries for work-related injuries and fatalities, accounting for more than half of fatalities in Korea. Advanced countries have recognized the critical role of designers in preventing construction accidents and have established regulations on design for safety. In line with this, the Korean government have also implemented regulations that require owners and designers to review the safety of design outcomes. However, it has been observed that designers face challenges in identifying hazards and integrating design solutions at the design stage mainly due to their shortage of required knowledge and skills. This study aimed to examine design solutions that can be applied to prevent fall accidents in the construction industry, and to establish a relationship between these solutions and fatal fall accidents occurred over the past three years in Korea. This study also analyzed the relationships of four variables (construction type, cost, work type, and fall location) with design solutions. The results indicated that all four variables have significant relationships with design solutions, with fall location showing the strongest relationship. The design solutions and their relationships with fatal fall accidents identified in this study can be utilized in identifying hazard and integrating design solutions to ensure design for safety.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.212-217
• /
• 1993

In this paper, characteristics of the motions of a human arm are investigated experimentally. When the conditions of the target point are restricted, human adjusts its trajectory and velocity pattern of the arm to fit the conditions skillfully. The purpose of this work is to examine the characteristics of the trajectory, velocity pattern, and the size of the duration in the following cases. First, we examine the case of point-to-point motion. The results are consistent with the minimum jerk theory. However, individual differences in the length of the duration can be observed in the experiment. Second, we examine the case which requires accuracy of positioning at the target point. It is found that the velocity pattern differs from the bell shaped pattern explained by the minimum jerk theory, and has its peak in the first half of the duration. When higher accuracy of the positioning is required, learning effects can be observed. Finally, to examine the case which requires constraint of the arm posture at the target point, we conduct experiments of a human trying to grasp a cup. It is considered that this motion consists of two steps : one is the positioning motion of the person in order to start the grasping motion, the other is the grasping motion of the human's hand approaching toward the cup and grasping it. In addition, two representative velocity patterns are observed : one is the similar velocity pattern explained in the above experiment, the other is the velocity pattern which has its relative maximum in the latter half of the duration.

• Journal of the Korean Society of Costume
• /
• v.58 no.8
• /
• pp.106-119
• /
• 2008

This study explores grotesque characteristics that were raised as the Aesthetics of the Ugly and how it was featured in Alexander McQueen's arts. In a methodological approach, the study attempted the analysis of historical literature that was published both nationally and internationally, along with justifiable investigation using fashion/collection magazines such as Vogue, Gap and Internet search. The scope of this study ranges from 1996's Haute Couture and Pret-a-porter collection pieces modern, to date The results of this study are summarized as follows: The first grotesque characteristic present throughout Alexander Mcqueen's arts is that it featured horrifying images or evil motives with pointy heads or horns, dark colored dresses, silver accessories, Dracula, witches, skulls, soldiers of evil, death and sickness. Second, aversion was realistically portrayed by frightening objects, extreme intimacy and motives that signify death and closely relative to cruelty to human bodies. It also became visible with physical destruction of the bodies and dissecting of internal organs, etc. Thirdly, its expression of humor is out of common sense with distorted human bodies by intentionally overemphasizing certain portion of the clothes or body parts. It also featured strangely deformed bodies by ignoring the typical shapes of clothes, vague definition of gender and using of unusual objects. Forth, half-man and half-beast images are portrayed using various types of bird species or animals to Identify disparity. It further defined this image in the form of non-human cyborg by incorporating technology.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.97-100
• /
• 2004

Our country has depended on fossil fuel very much according to the Increasing of the demand of the electric power. For instance, if the reduction and freezing caused by the warm gas in earth by the regulation of international environment happen in Korea it will bring about the result of weakness in industrial activity. As a result, it will cause many problems to compete an advanced country which wants to connect environment with the activity of industrial product in their country. The photovoltaic system outputs have peak about a half past 13 o'clock(before and after) mainly in a good weather. The output decreases rapidly from a half past 17 o'clock and PV output doesn't work at six o'clock before the sun rises. The outputs of PV system stops at that time. The frequent degree of harmonics in dwelling house which lots of people live has peak from 19 o'clock to 22 o'clock Harmonics mainly happens at least at night. In recent, many researches about power quality has been studying very hard in order to solve the question, the voltage fluctuating and harmonics as one compensator. In this paper, I suggest the algorithm which can increase the power quality as a rate of operation of this system. This algorithm proves to have effectiveness through computer simulation.

• Journal of The Korean Association For Science Education
• /
• v.14 no.3
• /
• pp.366-378
• /
• 1994

The titled study has been conducted by collecting questionnaires from 146 secondary school science teachers. The results analysed are as follows. 1. More than half of the science teachers think that they have too much loads on teaching and other works. They hope to teach 15 hours a week or less and also to be waived from extra works not related with teaching. 2. Most of the science teachers think that they are not paid enough salary. And more than half of them feel their economic and social status are below average. 3. Science teachers think that they have good relations with their colleagues but many of them are not much satisfied with the attitudes of students and their parents. 4. Science teachers want better facilities for teaching and for their office. 5. Science teachers feel difficult in teaching laboratory class. They pointed out that it is time-consuming to prepare for experiments and clean up the laboratory and that evaluation of experimental work is not easy. 6. Science teachers appeal that they have difficulties in teaching inquiry skills due to the crowded class and also lack of teaching materials for this purpose.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.9-12
• /
• 2005

We have constructed an RSFQ 4-bit Arithmetic Logic Unit (ALU) in a pipelined structure. An ALU is a core element of a computer processor that performs arithmetic and logic operation on the operands in computer instruction words. We have simulated the circuit by using Josephson circuit simulation tools. We used simulation tools of XIC, $WRspice^{TM}$, and Julia. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in constructing the 4-bit ALU was consisted of three DC current driven SFQ switches and a half-adder. By commutating output ports of the half adder, we could produce AND, OR, XOR, or ADD functions. The circuit size of the 4-bit ALU when fabricated was 3 mm x 1.5 mm, fitting in a 5 mm x 5mm chip. The fabricated 4-bit ALU operated correctly at 5 GHz clock frequency. The chip was tested at the liquid-helium temperature.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1256-1267
• /
• 2017

A fault tolerant structure and its corresponding control strategy for electromagnetic stirring power supplies are proposed in this paper. The topology structure of the electromagnetic stirring power supply contains two-stages. The fore-stage is the PWM rectifier. The back-stage is the fault tolerant inverter, which is a two-phase three-bridge orthogonal inverter circuit while operating normally. When the power switch devices in the inverter are faulty, the structure of the inverter is reconfigured. The two-phase half bridge inverter circuit is constructed with the remaining power switch devices and DC-link capacitors to keep the system operating after cutting the faulty power switch devices from the system. The corresponding control strategy is proposed to let the system work under both normal and fault conditions. The reliability of the system is improved and the requirement of the electromagnetic stirring process is met. Finally, simulation and experimental results verify the feasibility of the proposed fault tolerant structure and corresponding control strategy.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.39-48
• /
• 2005

Nitrogen and sulfur deposition was measured on Lake Pal dang from March 2002 to October 2003. Wet and dry depositions were separately measured using wet- and dry-only samplers, respectively. In order to measure the dry deposition to the water body, a dry deposition sampler composed of three pans filled with pure water, called the deposition water, was used. Since ammonium was generally in excess in ambient air, more than half of ammonium was present in the gaseous form. Ammonium concentration was also generally higher than the sum of major anion concentrations in the deposition water because gaseous species were much easily deposited than the species in fine particles. Nevertheless, the contribution of gaseous ammonia to the deposition of ammonium was not high as well as that of particulate ammonium while the contribution of gaseous nitric acid was much higher than that of particulate nitrate. Annual wet deposition fluxes of nitrogen and sulfur were five and six times higher than their dry deposition fluxes, respectively. Except for ammonium, the dry deposition flux estimated in the present work was a half of the previous results. This was mainly caused by much smaller dry deposition velocities over the water than over the ground.

• Journal of architectural history
• /
• v.8 no.1 s.18
• /
• pp.9-28
• /
• 1999

Broadly speaking, this paper is concentrated on the trimming of the wood demanded for the palace, constructed in the 2nd half of the Choseon Dynasty. To be concrete, this is the study on the craftman and craftmanship corncerned with the trimming of the wood, its system, and terms of payment of his wages, Construction reports, financial reports, job slips, written estimates, bills for payment, and other documents in those days are examined for the study. Following conclusions have been reached through the study. 1) The operation system of whole construction office and its suboffice was very specialized and systematized from the early 19th century. 2) The craftman engaged in trimming of the wood was subdivided by work function. 3) The craftman for its first trimming, i.e. 'keojang' or 'seonjang' had been treated as a speacial labor recruited to the mid-l8th century, after that, was enrolled into the craftman. 4) A unit cost of its first trimming was firstly appropriated into the reconstruction of the Kyongwoon Palace in the early 20th century, and it was very subdivided for a personnel management. 5) Contract works were widely applied to all workers engaged in the reconstruction for an efficiency of the accomplishments.

• Journal of Gastric Cancer
• /
• v.4 no.2
• /
• pp.95-108
• /
• 2004

This nationwide survey was conducted to evaluate the current status of clinical practice for gastric cancer patients in Korea. The Information Committee of the Korean Gastric Cancer Association (KGCA) sent questionnaires containing 45 items about the preoperative diagnosis, medical and surgical treatment, and postoperative follow-up for gastric cancer patients to all 298 KGCA members in 108 institutes. Response rates were $32.6\%$ (97/298) for individuals and $59.3\%$ (64/108) for institutes. Most university hospitals responded (response rate of university hospitals: $71.6\%$, 48/67). The preoperative staging work up was performed primarily by abdominal CT, followed by bone scans, abdominal ultrasound, endoscopic ultrasound, and so on. Gastric cancer patients with stages II, III, and IV usually received adjuvant chemotherapy after a curative operation. About half of the surgeons regarded 2 cm as a safe resection margin in early gastric cancer and 5 cm in advanced gastric cancer. More than half of surgeons usually performed a D2 lymph node dissection in early gastric cancer and D2+$\alpha$ lymph node dissection in advanced gastric cancer. About $20\%$ of surgeons performed less invasive surgery and/or function-preserving surgery, such as a pylorus-preserving gastrectomy, a laparoscopic wedge resection, or a laparoscopy-assisted distal gastrectomy.