• 제목/요약/키워드: Half Step

검색결과 298건 처리시간 0.023초

Half PC slab의 건조수축 거동 예측 (Prediction of Drying Shrinkage Behavior of Half PC Slab)

  • 서태석;최훈제
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.7-8
    • /
    • 2016
  • The use of half PC slab is increasing to shorten construction period. Because the drying shrinkage of topping concrete is restrained by PC slab, the tensile stress is generated at the topping concrete and the cracks can be occurred at the topping concrete due to drying shrinkage. Therefore, it is important to predict the tensile strain of half PC slab due to drying shrinkage to improve the quality of half PC slab. However, there is no studies on prediction of shrinkage behavior of half PC slab yet. Therefore, in this study, half PC slab was made, and the predictability of tensile strain generated at half PC slab due to drying shrinkage was investigated. The step by step method considering creep was used to estimate the tensile strain of half PC slab. In result, good agreement was obtained between the analytical and experimental values.

  • PDF

Half PC 슬래브의 건조수축 거동 예측에 관한 연구 (Study on Prediction of Drying Shrinkage Behavior of Half PC slab)

  • 서태석;최훈제
    • 한국건축시공학회지
    • /
    • 제17권1호
    • /
    • pp.31-37
    • /
    • 2017
  • 최근에는 공사기간을 단축하기 위해서 데크플레이트 외에 half PC 슬래브의 사용도 점차적으로 증가하고 있는 실정이다. PC 슬래브 위에 후타설되는 topping concrete 의 건조수축 변형이 PC 슬래브에 의해 구속을 받게 되므로 topping concrete 에 건조수축에 의한 균열이 발생할 수 있다. 따라서 half PC 슬래브의 품질을 향상시키고 내구성능을 증가시키기 위해서 건조수축에 의한 half PC 슬래브의 거동을 사전에 정확히 예측하는 것이 중요하다. 하지만 아직까지 half PC 슬래브의 수축거동 예측에 관한 연구결과가 없는 실정이므로 본 연구에서는 half PC 슬래브를 대상으로 건조수축거동을 관찰하였으며, 크리프특성을 고려한 증분법에 의한 수축거동을 예측한 후 실측값과 비교하여 그 타당성을 검토하였다. 그 결과 건조수축의 구속작용에 의해 half PC 슬래브에 발생하는 인장변형률은 구속률 개념과 증분법을 적용하여 예측이 가능한 것으로 확인되었다.

Mechanistic Study of Half-titanocene-based Reductive Pinacol Coupling Reaction

  • Kim, Young-Jo;Do, Young-Kyu;Park, Sung-Jin
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권11호
    • /
    • pp.3973-3978
    • /
    • 2011
  • The reductive pinacol coupling reaction of aldehydes or ketones creating a new C-C bond has been a major tool to produce 1,2-diol compounds. The reaction mechanism is known to be composed of sequential three steps (activation, coupling, and dissociation). In this work, we studied the dissociation step of half-titanocene-based catalytic systems. Cp and $Cp^*$ derivatives of the pinacolato-bridged dinuclear complex were synthesized and evaluated as possible models for intermediates from the coupling step. We monitored $^1H$-NMR spectra of the reaction between the metalla-pinacol intermediates and $D_2O$. New reaction routes of the dissociation step including oxo- and pinacolato-dibridged dinuclear complexes and oxo-bridged multinuclear complexes have been suggested.

On Nonovershooting or Monotone Nondecreasing Step Response of Second-Order Systems

  • Kwon, Byung-Moon;Lee, Myung-Eui;Kwon, Oh-Kyu
    • Transactions on Control, Automation and Systems Engineering
    • /
    • 제4권4호
    • /
    • pp.283-288
    • /
    • 2002
  • This paper has shown that the impulse and the unit step responses of 2nd-order systems can be computed by an analytic method. Three different 2nd-order systems are investigated: the prototype system, the system with one LHP(left half plane) real zero and the system with one RHP(right half plane) real zero. It has also shown that the effects of the LHP or the RHP zero are very serious when the zero is getting closer to the origin on the complex plane. Based on these analytic results, this paper has presented two sufficient and necessary conditions for 2nd-order linear SISO(single-input/single-output) stable systems to have the nonovershooting and the monotone nondecreasing step response, respectively. The latter condition can be extended to the sufficient conditions for the monotone nondecreasing step response of high-order systems.

A Three-Phase AC-DC High Step-up Converter for Microscale Wind-power Generation Systems

  • Yang, Lung-Sheng;Lin, Chia-Ching;Chang, En-Chih
    • Journal of Power Electronics
    • /
    • 제16권5호
    • /
    • pp.1861-1868
    • /
    • 2016
  • In this paper, a three-phase AC-DC high step-up converter is developed for application to microscale wind-power generation systems. Such an AC-DC boost converter prossessess the property of the single-switch high step-up DC-DC structure. For power factor correction, the advanced half-stage converter is operated under the discontinuous conduction mode (DCM). Simulatanously, to achieve a high step-up voltage gain, the back half-stage functions in the continuous conduction mode (CCM). A high voltage gain can be obtained by use of an output-capacitor mass and a coupled inductor. Compared to the output voltage, the voltage stress is decreased on the switch. To lessen the conducting losses, a low rated voltage and small conductive resistance MOSFETs are adopted. In addition, the coupled inductor retrieves the leakage-inductor energy. The operation principle and steady-state behavior are analyzed, and a prototype hardware circuit is realized to verify the performance of the proposed converter.

AN IMPROVED BABY-STEP-GIANT-STEP METHOD FOR CERTAIN ELLIPTIC CURVES

  • OH BYEONG-KWEON;HA KIL-CHAN;OH JANGHEON
    • Journal of applied mathematics & informatics
    • /
    • 제20권1_2호
    • /
    • pp.485-489
    • /
    • 2006
  • In this paper, we slightly improve the Baby-step Giant-step for certain elliptic curves. This method gives the running time improvement of $200\%$ in precomputation (Baby-step) and requires half as much storage as the original Baby-step Giant-step method.

Half-Bridge ZCS resonant inverter 및 Cockroft-Walton회로를 사용한 공기 청정기에 관한 연구 (ESP by using Half-bridge ZCS resonant inverter and Cockroft-Walton circuit)

  • 박종웅;정종진;정현주;정종한;김희제
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 C
    • /
    • pp.1951-1953
    • /
    • 2004
  • In this study, we propose a small high voltage power supply which use a half-bridge ZCS resonant and Cockroft-Walton on circuit, for ESP (Electrostatic Precipitator). This power supply transfers energy from ZCS resonant inverter to step-up transformer and the transformer secondary is applied to the Cockroft-Walton circuit for generating high voltage as discharging source of electrodes. It is highly efficient because its amount of switching losses are reduced by virtue of the current resonant half-bridge inverter, and also due to the small size, low parasitic capacitance in the transformer stage owing to the low number of winding turns of the step up transformer secondary combined with the Cockroft-Walton circuit. From these results, the best operational condition is obtained at the switching frequency of 9 kHz and the duty ratio of 50 % in this ESP.

  • PDF

Sufficient and Necessary Condition for Monotone Nondecreasing Step Response of Second-Order System

  • Kwon, Byung-Moon;Kwon, Oh-Kyu;Kim, Dae-Woo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.96.1-96
    • /
    • 2001
  • This paper is shown that the impulse and unit step response of second-order system can be computed by the analytic methods using Laplace transform. Also, the transient response specifications are explicitly formulated by the peak undershoot and maximum overshoot of the step response. Three different second-order systems are investigated: prototype system, system with LHP(left half plane) real zero, and system with RHP(right half plane) real zero. Based on these analytic results, this paper presents the sufficient and necessary conditions for the second-order linear SISO(single-input/single-output) stable system to have the nonovershooting or monotone nondecreasing step response.

  • PDF

A CW $CO_2$ Laser Using a High Voltage Dc-dc Converter with Half-bridge Resonant Inverter and Cockroft-Walton Multiplier

  • Chung, Hyun-Ju;Joung, Jong-Han;Kim, Geun-Young;Min, Byoung-Dae;Kim, Hee-Je
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제3C권4호
    • /
    • pp.123-129
    • /
    • 2003
  • We propose a high voltage dc-dc converter for a CW (continuous wave) $CO_2$ laser system using a current resonant half-bridge inverter and a Cockcroft-Walton circuit. This high voltage power supply includes a 2-stage voltage multiplier driven by a regulated half-bridge series resonant inverter. The inverter drives a step-up transformer and the secondary transformer is applied to the voltage multiplier. It is highly efficient because of the reduced amount of switching losses by virtue of the current resonant half-bridge inverter, and also due to the small size, low parasitic capacitance in the transformer stage owing to the low number of winding turns of the step up secondary transformer combined with the Cockroft-Walton circuit. We obtained a maximum laser output power of 44 W and a maximum system efficiency of over 16%.