• Title/Summary/Keyword: Half Cutting

Search Result 83, Processing Time 0.026 seconds

Studies on the method for promoting the germination of sod seed (잔디종자의 발아촉진에 관한 연구)

  • Jae-Young Cho;Bong-Ku Kim
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.4 no.1
    • /
    • pp.125-129
    • /
    • 1968
  • For the study of method for promoting the germination of Korean sod seeds harvseted newly some physical and chemical treatments were tested in this experiment. The summarized results of these tests are as follows: 1. Storage of wet seed in low temperature of 0~$2^{\circ}C$ during 2~30 days was seemed the most effective treatment for promoting the germination of sod seed. 2. The treatment that Soaking and mixing up the seeds in cone sulphuric acid about one and half minutes and then washing off in the water promoted fairly the germination of sod seeds. 3. Better germination of sod seeds was found in the light than in the dark or soil. 4. Cutting the top of seed and crushing of seed coat with sand seemed to promote slightly the germination of sod seeds. 5. No promoting effect for germination of sod seeds was found with treatments of Gibberellin, $NH_4$ $NO_3$ and NAA.

  • PDF

A Study on Small-sized Index Structure and Fast Retrieval Method Using The RCB trio (RCB트라이를 이용한 빠른 검색과 소용량 색인 구조에 관한 연구)

  • Jung, Kyu-Cheol
    • Journal of the Korea Society of Computer and Information
    • /
    • v.12 no.4
    • /
    • pp.11-19
    • /
    • 2007
  • This paper proposes RCB(Reduced Compact Binary) tie to correct faults of both CB(Compact Binary) tie and HCB(Hierarchical Compact Binary) trie. First, in the case of CB trie, a compact structure was tried for the first time, but as the amount of data was increasing, that of inputted data gained and much difficulty was experienced in insertion due to the dummy nods used in balancing trees. On the other hand, if the HCB trie realized hierarchically, given certain depth to prevent the map from increasing on the right, reached the depth, the method for making new trees and connecting to them was used. Eventually, fast progress could be made in the inputting and searching speed, but this had a disadvantage of the storage space becoming bigger because of the use of dummy nods like CB trie and of many tree links. In the case of RCB trie in this thesis, the tree-map could be reduced by about 35% by completely cutting down dummy nods and the whole size by half, compared with the HCB trie.

  • PDF

Development of a Tractor Attached Round Bale Wrapper(I) -Analysis of wrapping process and development of operating system- (트랙터 견인형 원형 베일 랩퍼의 개발(I) -랩핑 작업공정 분석 및 작업 시스템의 개발-)

  • Park, K. K.;Kim, H. J,;Kim, C. S.;Kim, J. Y.;Kim, J. H.;Jang, C.
    • Journal of Biosystems Engineering
    • /
    • v.27 no.1
    • /
    • pp.11-18
    • /
    • 2002
  • One of the major obstructing factors against managing dairy farm in Korea has been a shortage of roughage supply, which resulted in excessive abuse of concentrate feed. In order to solve this problem, production of the wrap silage by the winter cereal forages raised in the fallow paddy field is strongly recommended in Korea. The main objective is to develop a tractor attached round bale wrapper which can process the silage by wrapping the round bales with thin plastic films. This is the first half of the study which is divided by two parts. In this first part, bale wrapping process was analyzed, and based on this results the followings were designed, developed and tested. 1. Bale wrapper which haying the maximum capacity of 1 ton bale with various functions such as loading, wrapping, discharging the round bales and supplying and cutting wrap films was designed. 2. An actuator and its hydraulic circuit of each process were developed and tested. 3. Also, the variations of hydraulic pressure and engine speed were investigated by operating bale wrapper developed. In this test, maximum pressure of the hydraulic circuit for the bale wrapping was 130 kg/㎠ when it raised the bale, which was quite below the relief pressure of 170 kg/㎠ of hydraulic circuit. In the engine speed test, speed drop was 20∼67 rpm, which meant that there was no over-load operation. Therefore, the experiment proved that developed hydraulic circuit and mechanism is stable in bale wrapping operation

Multiple Shoot Formation from Cotyledonary Nodes of Soybean Cultivars (대두 품종에 따른 자엽절에서의 다신초 형성)

  • Ha, Keon-Soo;Han, Tae-Jin
    • Journal of Plant Biotechnology
    • /
    • v.29 no.1
    • /
    • pp.51-57
    • /
    • 2002
  • For the plant regeneration of soybean (Glycine me L. Merr.), the shoot formation rate, optimal medium and tissue conditions were examined using Korean soybean cultivars. Among the parts of seedling, a node that includes one cotyledon showed the highest shoot formation rate among other tissues. Half-strength B5 medium was more efficient than full strength medium. Formation rates of pair shoots (1 to 2 shooting) were higher in the when benzyl adenine was supplemented. The formation rates of multiple shoots, that is, 4 to 5 in shooting, were high when thidiazuron was supplemented. Multiple shoot was de novo formed in cutting side of cotyledonary node. The effective concentration of thidiazuron for shoot induction treatment was 2 mg/L. Among the 27 cultivars, multiple shoot formation rates were high in the 11 cultivars including 'Heugcheongkong, and pair shoot formation rates were high in the 16 cultivars including 'Malikong'.

Assessment of effect of accelerated aging on interim fixed dental materials using digital technologies

  • Omar, Alageel;Omar, Alsadon;Haitham, Almansour;Abdullah, Alshehri;Fares, Alhabbad;Majed, Alsarani
    • The Journal of Advanced Prosthodontics
    • /
    • v.14 no.6
    • /
    • pp.360-368
    • /
    • 2022
  • PURPOSE. This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging. MATERIALS AND METHODS. Three groups of interim dental restorative materials (N = 20) were tested. The first group (CO) was fabricated using a conventional manual method. The second group (ML) was prepared from prefabricated resin blocks for the milling method and cut into specimen sizes using a cutting disc. The third group (3D) was additively manufactured using a digital light-processing (DLP) 3D printer. Aging acceleration treatments using toothbrushing and thermocycling simulators were applied to half of the specimens corresponding to three years of usage in the oral environment (N = 10). Surface roughness (Ra), Vickers microhardness, 3-point bending, sorption, and solubility tests were performed. A 2-way analysis of variance (ANOVA) and Fisher's multiple comparison test were used to compare the results among the groups. RESULTS. The mean surface roughness (Ra) of the resin after accelerated aging was significantly higher in the CO and ML groups than that before aging, but not in the 3D group. All groups showed reduced hardness after accelerated aging. The flexural strength values were highest in the 3D group, followed by the ML and CO groups after accelerated aging. Accelerated aging significantly reduced water sorption in the ML group. CONCLUSION. According to the tested material and 3D printer type, both 3D-printed and milled interim restoration resins showed higher flexural strength and modulus, and lower surface roughness than those prepared by the conventional method after accelerated aging.

A Study on the Excavated Sab(a funeral fan) from Lime-filled Tomb and Lime-layered Tomb during the Joseon Dynasty (조선시대 회격·회곽묘 출토 삽(翣)에 대한 고찰)

  • Yi, Seung Hae;An, Bo Yeon
    • Korean Journal of Heritage: History & Science
    • /
    • v.41 no.2
    • /
    • pp.43-59
    • /
    • 2008
  • Sap(?, a funeral fan) is a funeral ceremonial object used in association with a Confucian ceremonial custom, which was crafted by making a wooden frame, attaching a white cloth or a thick paper onto it, drawing pictures on it, and making a holder for a handle. According to Liji(Records of Rites), Sap was used since the Zhou Dynasty, and these Chinese Sap examples are no big different than the Korean Sap examples, which were described in Joseon Wangjo Sillok(Annals of the Joseon Dynasty), Gukjo Oryeui(the Five Rites of the State), and Sarye Pyeollam(Handbook on Four Rituals). This study explored Sap excavated in lime-filled tombs and lime-layered tombs of aristocrats dating back to Joseon, as well as their historical records to examine Sap's characteristics according to their examples, manufacturing methods, and use time. The number and designs of Sap varied according to the deceased' social status aristocrats used mainly one pair of 亞-shaped Bulsap, and a pair of Hwasap with a cloud design depicted on it. A Sap was wrapped twice with Chojuji paper or Jeojuji paper, and for the third time with Yeonchangji paper. Then, it was covered with a white ramie, a hemp, a cotton, a silk satin, etc. Bobul(an axe shape and 亞-shape design) was drawn on both sides of Sap, and a rising current of cloud was drawn at the peripheral area mainly with red or scarlet pigments. Sap, which were excavated from aristocrats'lime-filled and lime-layered tombs, are the type of Sap which were separated from its handle. These excavated Sap are those whose long handles were burnt during the death carriage procession, leaving Sap, which later were erected on both sides of the coffin. The manufacturing process of excavated relics can be inferred by examining them. The excavated relics are classified into those with three points and those with two points according to the number of point. Of the three-point type(Type I), there is the kind of relic that was woven into something like a basket by using a whole wood plate or cutting bamboo into flat shapes. The three-point Sap was concentrated comparatively in the early half of Joseon, and was manufactured with various methods compared with its rather unified overall shape. In the meantime, the two-point Sap was manufactured with a relatively formatted method; its body was manufactured in the form of a rectangle or a reverse trapezoid, and then its upper parts with two points hanging from them were connected, and the top surface was made into a curve(Type II) or a straight line(Type III) differentiating it from the three-point type. This manufacturing method, compared with that of the three-point type, is simple, but is not greatly different from the three-point type manufacturing method. In particular, the method of crafting the top surface into a straight line has been used until today. Of the examined 30 Sap examples, those whose production years were made known from the buried persons'death years inscribed on the tomb stones, were reexamined, indicating that type I was concentrated in the first half of the $16^{th}$ century. Type II spanned from the second half of the $16^{th}$ century to the second half of the $17^{th}$ century, and type III spanned from the first half of the $17^{th}$ century to the first half of the $18^{th}$ century. The shape of Sap is deemed to have changed from type I to type II and again from type II to type III In the $17^{th}$ century, which was a time of change, types II and III coexisted. Of the three types of Sap, types II and III re similar because they have two points; thus a noteworthy transit time is thought to have been the middle of the $16^{th}$ century. Type I compared with types II and III is thought to have required more efforts and skills in the production process, and as time passed, the shape and manufacturing methods of Sap are presumed to have been further simplified according to the principle of economy. The simplification of funeral ceremonies is presumed to have been furthered after Imjinwaeran(Japanese invasion of Joseon, 1592~1598), given that as shown in the Annals of King Seonjo, state funerals were suspended several times. In the case of Sap, simplification began from the second half of the $16^{th}$ century, and even in the $18^{th}$ century, rather than separately crafting Sap, Sap was directly drawn on the coffin cover and the coffin. However, in this simplification of form, regulations on the use of Sap specified in Liji were observed, and thus the ceremony was rationally simplified.

The Vegetation Structure and Management Solution of the Natural Monument (No.374) Pyeongdae-ri Torreya nucifera forest of Jeju (천연기념물 제374호 제주 평대리 비자나무 숲의 식생구조 및 관리방안)

  • Lee, Won-Ho;Oh, Hae-Sung
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.31 no.3
    • /
    • pp.54-60
    • /
    • 2013
  • This study carried out a phytosociological research by Z.-M. school's method describing vegetation structure and management solution about nutmeg tree's(Torreya nucifera ) forests. The nutmeg tree's forests have developed intervale and hills in warm-temperate evergreen broad-leaved forests zone. The nutmeg tree's forests composed 50 familly, 80 genus, 88 species divided two syntaxa(typical sub-community, Arachniodes aristata sub-community) by species composition and correspond to habitat condition. The nutmeg tree's forests show a uniform forest's structure which composed 3~4 layer of sub-tree and shrub. And it was worthy of special mention which characterized diagnostic species of Camellietea japonicae in the warm-temperate evergreen broad-leaved forests. In case of forests floor, were a high rate in order of Ophiopogon japonicus, Polystichum tripteron, Arisaema ringens. And Oplismenus undulatifolius which represent mantle communities as well. This indicates that the nutmeg tree's forests are exposed by humman effects sustainedly. The nutmeg tree's young trees appeared a high rate at half shade and shade. The vigorous tree species have to spacing cutting instead of the heavy thinning that consist in with a shout of declining astructur and function of the forest ecosystem for maintaining a nutmeg tree's forests. And we suggest for the density regulation of the sub-tree and shrub. In conclusion, need to the continuous monitoring about the vegetation structure and management solution for the sustainable nutmeg tree's forests.

Study on Practical Micropropagation of Juiube Cultivars through Axillary Bud Culture (액아배양(腋芽培養)에 의한 신품종(新品種) 대추나무의 실용적(實用的)인 대량증식(大量增殖)에 관(關)한 연구(硏究))

  • Kim, Deok Sik;Lee, Sei Pyo
    • Journal of Korean Society of Forest Science
    • /
    • v.77 no.4
    • /
    • pp.445-452
    • /
    • 1988
  • This study was conducted to establish practical micropropagation of jujube cultivars ('Geumsumg', 'Bokjo') by axillary bud culture. The results are summerized as follows : 1. Addition of activated charcoal to half-strength Murashige and Skoog(MS) medium supplemented with 0.5mg/l benzylaminopurine(BAP) enhanced shoot and root growth. At 500mg/l activated charcoal level 'Geumsung' showed best result, and shoot length and the number of multiple shoot were 6.4cm and 10.0, respectively. At 1,000mg/l activated charcoal level 'Bokjo showed best result, and shoot length and the number of multiple shoot were 7.5cm and 12.4, respectively. 2. As indole-3-butyric acid(IBA) concentration increased, rooting and callus growth of microshoot were enhanced. The optimum IBA concentration for shoot elongation and multiplication was 1.0mg/l. 3. Growth responses of shoot-tip and axillary bud segments between two jujube cultivars were different. 'Geumsung' showed that axillary bud explants were about twice better than shoot-tip explants for shoot multiplication, but 'Bokjo' showed that shoot-tip explants mere better than axillary bud explants for shoot elongation and multiplication. 4. In acclimatization processes of plantlets produced in vitro, the survival of plantlets with only root primordia in soil medium was better than that of plantlets with several routs resulting in 97.8%. 5. In cutting of in vitro-derived microshoot, paclobutrazol was more effective than IBA, naphth-aleneacetic acid(NAA) and $Rooton^{(R)}$ in rooting and root growth.

  • PDF

Relation between the growth of mulberry shoots and various sizes of cut down mulberry branch in Spring (상수지조의 벌채정도와 신초의 발육과의 관계)

  • 김문협
    • Journal of Sericultural and Entomological Science
    • /
    • v.4
    • /
    • pp.27-31
    • /
    • 1965
  • The aim of this work was to investigate how the mulberry shoots grew well when the mulberry branches were cut down, in hight, 1/3, $\frac{1}{2}$ and 2/3 of them, respectively, just before the Spring budding. The results obtained are as follows: 1. The rate of un-sprouted buds decreased sharply down as much as half of the control if the mulberry branches were cut off. The treatment, 1/3, was best one of various cut down sizes and the un-sprouted buds concentrated on the lower parts of the branches. 2. Even though the branches were cut down, at first it seemed flat to accelerate the sprouting of buds, but rather to have a tendency to become late. The speed of leaf growth, however, became faster after the sprouting. It took 7~9 days from the beginning of buddings to the 5th full grown leaf, and.7 days for the shortest one in the treatment, 2/3, when compared with 16 days of the control. 3. If the branches were cut down, the growth of the new sprouts was accelerated. For 45 days (on 5th of May to on 10th of June), therefore. the shoots had grown up to 1.6~2.5 times of the control, 34cm long. The shoots of which the branches were cut down at 2/3 of them were longest (83cm). Furthermore. the speed of shoot growth of cut-down branches was faster than that of the control. 4. In the increased rate of the number of the mulberry leaves, there was not significant difference between the control and the treatments. 5. The total amount of shoot growth showed considerably much more in the treatments than in the control. The successing growing shoots of treatment, 2/3 were little in a number but longest per one shoot in mean shoot length. 6. It seems to be much available that we may cut down branches at 2/3 of them in order to get the scions for the cutting as soon as possible.

  • PDF

Study on the Improvement of Land Clearing Methods by Bulldozer & Fertilization of Cleared Soil (불도우저에 의한 개간 공법의 개선과 숙지화에 관한 연구)

  • Hwang, Eun
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.17 no.1
    • /
    • pp.3627-3641
    • /
    • 1975
  • The Government is trying to increase total food grain yield to meet national self sufficiency by means of increasing unit yield as well as extending crop land, and this year he set the target of 321,000 hectare of forest to clear for cropping. This study was carried to investigate the most efficient method of clearing hillock by bulldozer, and successful method to develope yielding potential of newly cleared land in short term. Since the conventional land clearing method is just earth leveling and root removing neglecting top soil treatment, the growth of crop was poor and farmer tends not to care the land. The top-soil-furrowing method is applied through out this study, that is advantageous especially for the land having shallow top soil and low fertility like Korean forest. In this study, various operating method were tried to find out most efficient method separately in connection with the land slope less than 25 percent and over, and several fertilizing methods to develop yielding potential. The results are as follows; 1) For the natural land slope utilization method, applicable to the land having less than 25 percent slope, reverse operating was more efficient than using forward gear of bulldozer. The operating time was 3 hour 32 minutes and 36 seconds using forward gear was 2 hour 32 minutes and 30 seconds for reverse gear operation per 1,000 square meter. 2) Bulldozer having angle blade adjustment needed 7hr 15min. for constructing of terrace per 10a compaire with the one having angle & tilt adjustment needed 6hr 4min for same operations. Specially there is significant difference for operation time of first period (earth cutting) such as bulldozer having angle blade adjustment needed 3hr 56min compaired with the one having angle & tilt adjustment 3hr 59min. In construction of terrace, the bull-dozer having tilting and angle blade adjustment was most suitable and performed efficiently. 3) For the fertilizer application treatment, the grass (Ladino clover) yield in first year was almost same as ordinary field's in the plot applied(N.P.K+lime+manure) while none fertilizer plot showed one tenth of it, and (N.P.K.+lime) applied plot yielded on third. 4) The effect of different land clearing method to yield showed significant difference between each treatment especially in the first year, and the conventional method was the lowest. In the second year, still conventional terracing plot yielded only half of ordinary field while the other plots showed as same as ordinary field's. 5) The downward top soil treatment plot showed most rapid improvement in soil structure during one year physio chemically, it showed increase in pH rate and organic composition, and the soil changed gradually from loam to sand-loam and the moisture content increased against the pF rate, and it gives good condition to grow hay due to the increase of field water capacity with higher available water content. 6) Since the soil of tested area was granite, the rate of soil errosion was increased about 2 to 5 percent influencing in soil structure more sand reducing clay content, and an optimum contour farming method should be prepared as a counter measure of errosion.

  • PDF