• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.749-752
• /
• 2002

In this study, we carried out the finite element analysis about screw that is the weakest part of the centrifuge for sewage management. Structural analysis was done with respect to the change of outer radius and thickness of screw blade and screw with sewage discharge hole. If the area of circular hole is equal to that of extended holes, maximum equivalent stress was compared between hole and extended hole. Centrifugal force on account of rotation of 4000 rpm was applied the screw. The results are as follows : 1 . When the larger radius and thickness of screw blade was used, the higher maximum equivalent stress is occurred. 2. When the larger radius of sewage discharge hale was used, the higher maximum equivalent stress is occurred. 3. When the longer parallel part length of extended hole was used, the higher maximum equivalent stress is occurred. 4. If the extended hole with the same discharging area which circular hole uses, the maximum equivalent stress is lower.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.491-494
• /
• 2002

The real-time industrial network often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices such as sensors, actuators, and controllers. numerous standard organizations and vendors have developed various fieldbus protocols such as Profibus, WorldFIP and Foundation Fieldbus. However, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. In order to solve these problems, the computer network technology, especially Ethernet (IEEE 802.3), is being adopted lo the industrial environment. The crucial technical obstacle for Ethernet is that its non-deterministic behavior makes it inadequate for industrial applications where real-time data such as control command and alarm signal hale to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet for industrial comm unications.

• 한국멀티미디어학회논문지
• /
• 제4권3호
• /
• pp.270-279
• /
• 2001

프로그램 수행 시간의 대부분이 루프 구조에서 소비되고 있기 때문에 루프 구조를 가진 순차 프로그램에서 병렬성을 추출하는 연구들이 많이 행해지고 있고 그 연구들은 하나의 프로시저 내 루프 구조의 변환에 치중되고 있다. 그러나 대부분의 프로그램들은 프로시저 간 잠재된 병렬성을 가지고 있다. 본 논문에서는 프로시저 호출을 가진 루프에서 병렬성 추출 방식을 제안한다. 프로시저 호출을 포함하는 루프의 병렬화는 대부분 자료종속거리가 uniform 형태의 코드에서만 집중되었다. 본 논문에서는 자료종속거리가 uniform 코드, nonuniform 코드 그리고 복합된(complex) 코드를 가진 프로그램에서 적용 가능한 알고리즘을 제시하였으며, 제안된 알고리즘과 loop extraction, loop embedding 그리고 procedure cloning 변환 방법을 CRAY-T3E로 성능 평가하였다. 성능평가 결과는 제안된 알고리즘이 효율적이라는 것을 보여준다.

• 한국정보처리학회논문지
• /
• 제5권9호
• /
• pp.2281-2293
• /
• 1998

공간상의 지형객체는 토지의 소유주 변경이나 소유주의 신상 변경, 토지의 합병과 분할, 도로의 신설 및 변경에 따른 지형 변경 등과 같은 공간 또는 속성 변화에 의해 공간이력 데이터가 발생한다. 하지만 기존의 GIS(Geographic Information System)는 측정시점에서 지형객체의 스냅샷 정보만을 관리하므로 시간 흐름에 따른 공간이력을 유지할 수 없다. 따라서 이 연구는 공간 데이터베이스의 시간차원 확장을 통하여 시간과 공간을 동시에 지원하는 시공간 데이터베이스 모델과 이력 관리 체계를 설계하고 구현한다. 이 연구의 결과는 GIS 공간 데이터베이스의 시간차원 확장으로 지형객체의 모든 이력정보를 유지 관리할 수 있다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권2호
• /
• pp.755-758
• /
• 2016

Background: There is little information about the objectivity of posttraumatic growth experienced by cancer patients. So, the aim of present study was to investigate the viewpoints of family caregivers regarding posttraumatic growth in cancer patients. Materials and Methods: This descriptive study was conducted in one referral medical center in East Azerbaijan Province in northwest of Iran. 120 primary family caregivers of cancer patients participated with a convenience sampling method. The Posttraumatic Growth Inventory (PTGI) and Perception about Prognosis Scale (PPS) were applied for data collection with analysis performed using SPSS statistical software. Results: Family caregivers believed that their patients had a good prognosis (score 3.95 from 5). The total score of PTGI was 60.7 (SD=18.8) that indicates a moderate level of growth as reported by family caregivers. Conclusions: Family caregivers of cancer patients have incorrect viewpoints about the prognosis of their patients and reported moderate levels of growth. These findings showed that posttraumatic growth among cancer patients is an objective phenomenon.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.236-238
• /
• 1997

A cellular power amplifier using an APCVD(Atmospheric Pressure Chemical Vapor Deposition)-grown SiGe base HBT of ETRI has been designed with a linear simulation CAD. The Si/SiGe HBT with an emitter area of 2$\times$8${\mu}{\textrm}{m}$$^2$typically has a cutoff frequency(f$_{T}$) of 7.0 GHz and a maximum oscillation frequency(f$_{max}$) of 16.1 GHz with a pad de-embedding A packaged power Si/SiGe HBT with an emitter area of 2$\times$8$\times$80${\mu}{\textrm}{m}$$^2$typically shows a f$_{T}$ of 4.7 GHz and a f$_{max}$ of 7.1 GHz at a collector current (Ic) of 115 mA. The power amplifier exhibits a Forward transmission coefficient(S21) of 13.5 dB, an input and an output reflection coefficients of -42 dB and -45 dB respectively. Up to now the III-V compound semiconductor devices hale dominated microwave applications, however a rapid progress in Si-based technology make the advent of the Si/SiGe HBT which is promising in low to even higher microwave range because of lower cost and relatively higher reproducibility of a Si-based process.ess.ess.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.186-191
• /
• 2001

Spinning process is a chipless metal forming method for axi-symmetric parts, which is more economical, efficient and versatile method for producing parts than the other sheet metal forming process such as stamping or deep drawing. In this study, a fundamental experiment was conducted to improve productivity with process parameters such as tool path, angle of roller holder($\alpha$), feed rate($\gamma$) and corner radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to hale an effect on spring back. The empirical results were analyzed to know how much spring back was affected by these factors. And also thickness and diameter distribution of a multistage cup obtained by spinning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1796-1801
• /
• 2001

For micro-machines, very few design methodologies based on optimization hale been developed so far. To overcome the difficulties of design optimization of micro-machines, the search method for multi-dimensional design window (DW)s is proposed. The proposed method is defined as areas of satisfactory design solutions in a design parameter space, using both continuous evolutionary algorithms (CEA) and the modified K-means clustering algorithm . To demonstrate practical performance of the proposed method, it was applied to an optimal shape design of micro electrostatic actuator of optical memory. The shape design problem has 5 design parameters and 5 objective functions, and finally shows 4 specific design shapes and design characters based on the proposed DWs.

• 천문학회보
• /
• 제35권1호
• /
• pp.68.2-68.2
• /
• 2010

We present near-infrared (NIR) spectra of 6 young stellar objects (YSOs) around the supernova remnant G54.1+0.3 obtained with TripleSpec, a slit-based NIR cross-dispersion echelle spectrograph on th 5-m Palomar Hale telescope covering the entire NIR atmospheric window of 1-2.4 micron. These YSOs, whose formation was possibly triggered by the progenitor of G54.1+0.3, show significant mid-infrared (MIR) excess and have been proposed to be late O- and early B-type YSOs based on their spectral energy distribution. Our TripleSpec observations reveal the existence of strong H and He I lines, consistent with the previous interpretation of their spectral types, while the absence of Br-gamma emission line indicates that the YSOs do not have a nearby circumstellar disk. We discuss the relation between these YSOs and G54.1+0.3 based on the TripleSpec data and previous photometric data as well.

• Structural Engineering and Mechanics
• /
• 제76권1호
• /
• pp.67-81
• /
• 2020

Pretensioned concrete (PC) is widely used in contemporary construction. Bond of prestressing strand is significant for composite-action between the strand and concrete in the transfer and flexural-bond zones of PC members. This study develops a new methodology for quantifying the bond of 18-mm prestressing strand in PC members based on results of a pullout test, the Standard Test for Strand Bond (STSB). The experimental program includes: (a) twenty-four pretensioned concrete beams, using a wide range of concrete compressive strength; and (b) twelve untensioned pullout specimens. By testing beams, the transfer length, flexural-bond length, and development length were all measured. In the STSB, the pullout forces for the strands were measured. Experimental results indicate a significant relationship between the bond of prestressing strand to the code-established design parameters, such as transfer length and development length. However, the code-predictions can be unconservative for the prestressing strands having a low STSB pullout force. Three simplified bond equations are proposed for the design applications of PC members.