• Journal of Advanced Marine Engineering and Technology
• /
• 제16권4호
• /
• pp.78-87
• /
• 1992

The experimental study and theoretical analysis are made in order to investigate a new refrigeration system, R-22 and R-502 or R-13 cascade compressor with panel type cooler, for tuna long liner. The experimental apparatus consists with the cascade unit, 1.5 HP R-502 compressor in the first stage and 1 HP R-22 compressor in the second stage, and 3 $m^2$ cold storage room with a direct expansion panel type cooler. The main result are as follows: 1. The energy saving and C.O.P. of the R-22 and R-502 or R-22 and R-13 cascade are improved much higher than two stage compressor. 2. For the point of simplicity of design, installation, and running cost, the panel type cooler is much better than traditional hair pin coil type cooler. 3. From the experimental data and analysis, the R-22 and R-502, or R-22 and R-13 cascade compressor with panel type cooler is recommended for a new refrigeration equipment of the tuna long liner.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.284-287
• /
• 2008

Flow over a sphere under forced oscillation at Re=300 is simulated for various frequency ratios which are defined as excitation frequency over natural frequency of stationary sphere. The results of oscillating sphere are compared with those of stationary sphere and an oscillating cylinder. Detailed vortical structures, hydrodynamic forces and frequencies of the wake are prescribed as a function of frequency ratio. For oscillating sphere, planar symmetry of the wake is kept and two nearly symmetric hair pin vortices are induced by oscillation for one period of oscillation when the frequency ratio is bigger than 0.5. Modulation phenomenon which can be found in an oscillating cylinder were not seen for an oscillating sphere.

• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.763-770
• /
• 1996

In this paper, the Single-stage Transmission type Injectiong-Locked Oscillator(STILO) was designed and fabicated for the Active Integrated Phased Array Antenna(AIPAA) system. The STILO, which was designed and fabricated by injection-locked technique and hair-pin resonator, has the same 210MHz frequency tuning range of the Voltage Controlled Oscillator(VCO) used by varactor. The locking bandwidth of STILO with 11.5MHz bandwidth, is much better than that of the Injection-Locked Dielectric Resonator Oscillator(ILDRO), And the STILO has the improved noise characteristics in AM, FM, and PM. This STILO is useful for the AIPAA, the coupled VCO array, an the MMIC structure.

• 한국ITS학회 논문지
• /
• 제8권5호
• /
• pp.98-104
• /
• 2009

본 논문에서는 Push-Push 구조와 고임피던스 인버터를 이용하여 개선된 VCO를 설계 및 제작하였다. 두 개의 고조파 발진기를 Push-Push 구조로 결합시킴으로써 기본주파수 억압특성을 개선하였으며, 고조파 출력을 향상시켰다. 이에 따른 위상잡음 증가는 고임피던스 인버터를 이용하여 공진기와 병렬선로 사이의 결합특성 개선을 통하여 억제하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.628-631
• /
• 2003

In this paper, 2.4 GHz WLAN BPF(Band Pass Filter) using LTCC(Low temperature cofiring ceramic) multilayer technology was simulated and manufactured. A modified ${\lambda}/4$ Hair-pin resonator with shunt-to ground loaded capacitor is used to shorten resonator length and improve circuit Q factor. Proposed BPF has a combline structure. Electro-magnetic Coupling between coupled strip-line resonators is controlled to provide attenuation poles at finite frequencies. The overall size of the filter is $3.2{\times}1.6{\times}1.3mm^3$. The measured result shows good agreement with simulated data.

• 한국통신학회논문지
• /
• 제21권9호
• /
• pp.2362-2372
• /
• 1996

This paper deals with the design and development of an Injection-Locking Coupled Oscillators(ILCO), which functions like phase-shifter in the Active Intergrated Phased Array Antenna(AIPAA). This linear array 2-element ILCO consists of two Injection Locking Hair-pin Resonator Oscillators(ILHRO) and an unilateral amplifier. The first and second elements of the ILCO have same frequency tuning range but locking bandwidths of 11.5MHz and 14MHz respectively. A phase shift of .DELTA..PHI.=158.4.deg.(-78.0.deg. to 80.4.deg.) could be obtained inthe second element of ILCO when the first elementof the ILCO was in the reference locking mode(.DELTA..PHI.=0.deg.). When the ILCO is applied to the AIPAA, the predicted beam scanning angle value will be 38.4.deg.. Each ILCO gives good frequency stability and lower AM, FM, and PM noise charactheristics in the mutual coupling lockingmode. The ILCO can not only play a part as the phase shifter for the AIPAA but it can also be usedas the power combining device in the mm-wave frequency range and as a part of a T/R MMIC module.

• 복식문화연구
• /
• 제14권6호
• /
• pp.956-970
• /
• 2006

The purposes of this study was to analyze the characteristics of national races' costumes in Chinese contemporary costumes. For the purpose, this researcher concentrated on the relations between national races' costumes and Chinese contemporary costumes and discuss systematically depending on references such as fashion magazines, picture albums, and historical records. The results of study were as follows: First, the formation of fashion has been influenced by Man, Uighur, and Choson races. For example, Qipao, the tight style of Man race's fashion, Uighur race's bell style sleeve and cyclic skirt are applied to women's modern fashion. Second, weaving, printing, and embroidery technique of a minority race developed more than Han race, so applied still. Recently, Chinese contemporary costumes accepted the weaving technique of Miao and Uighur race through publicizing of a minority culture. Third, a national race's costumes are famous with splendid design and applied to modern fashion directly. They are commonly made to hair pin, necklace, earing, bracelet and so on. Recently, styles from a national race's costumes and old style are becoming popular to Chinese and it's easier to found such a fashion in market.

• 소성∙가공
• /
• 제23권3호
• /
• pp.164-170
• /
• 2014

To predict the deformation and fracture during tube expansion using the finite element (FE) method, a material model is considered that incorporates the damage evolution due to the deformation. In the current study, a Rice-Tracey model was used as the damage model with inclusion of the hydrostatic stress term. Since OFHC Cu is not significantly affected by strain rate, a Hollomon flow stress model was used. The material parameters in each model were obtained by using an optimization method. The objective function was defined as the difference between the experimental measurements and FE simulation results. The parameters were determined by minimizing the objective function. To verify the validity of the FE modeling, cross-verification was conducted through a tube expansion test. The simulation results show reasonable agreement with the experiments. The design for a minimum diameter of expansion tube using the FE modeling was verified by a simplified tube expansion test and simulation results.

• 복식문화연구
• /
• 제8권3호
• /
• pp.493-511
• /
• 2000

The objective of this study was to trace and to examine costume terminologies recorded in Pak Tong Sa Eun Hae. Names of costumes and costume related terms were collected from P마 Tong Sa Eun Hae. Books and various references from China and Korea were used for this study. Costume terms were examined from the Chinese and Korean. Classifications of costume terminologies from the data were made for the analysis : man and woman's costume, accessories, names of fabrics, colors, and decorative motifs used, professional costume, special occasion dresses and so on. Conclusions and summary of results and findings can be summerized as follows : It revealed that manes of man's costume and other costume related words were a large in number compared with those of woman. Only one name of woman's costume appeared in the text : It was kind of long vests. However, names of accessories such as a hat, a hat decorated with jewels and phoenix design, a hair pin, earings, bracelets, finger rings, a soft belt were shown in the text. While many costume names of man included in the text were of garments such as a kind of long vest, a short vest, an outer robe, a kind of long coat with pleated skirt, leg coverings, outer jacket and so on. Also names of undergarments such as an under skirt, a belly covering, and drawers were found in the text. Fabric names were mostly silks such as brocade, twill, sarcenet, damasks and plain silks. Blue was the most widely appeared fabric color in the text and red was the second. Design motifs of fabric design were of dragon, flowers, eight precious things, clouds which were characteristic design motifs of the Chinese. It was found that some of the Chinese costume terminologies were translated into the Korean although many Chinese costume terms were used as the original Chinese.

• 복식
• /
• 제58권2호
• /
• pp.48-61
• /
• 2008

This study aimed to examine emo fashion, a very recent music-related fashion trend spreading fast amongst youths, and understand emo ideas and methods of expression for a greater understanding of contemporary youth sub-cultures and fashion trends. Documentary research, positive research and in-depth interviews were used throughout the study. 4 Korean emo bands and 4 U.S. emo bands were selected based on music chart rankings, and a total of 37 photographs from the bands' Internet websites were selected, and their clothes shown in the photographs were examined. 5 Korean emo band musicians were subjects of in-depth interviews, and they were asked about their emo culture, music, fashion, ideas and styles, and photographs were taken of the subjects and evaluated, too. Lastly, Korean and U.S. emo kids were studied through photographs, and comparatively analyzed. Both Korean and U.S. emo musicians wore slim silhouettes, skinny jeans, t-shirts, sneakers, black, studded belts and plastic-framed glasses. Korean fashion expressed a less depressive atmosphere with color and other details compared to the United States, and did not prefer dark black eye make-up, which United States emo style appeared to express frequently. Korean musicians' emo fashion was closer to other youth fashions, whereas U.S. emo fashion included more formal styles such as ruffled shirts and pin-striped vests. Korean emo kids wore clothes not much different from most Korean youths, but U.S. emo kids wore a lot of eye make-up and black t-shirts with graphic or skull prints, and had more geometrical hair styles, as if cut at home. The reasons for such differences were found to be a longer emo music and culture history in the United States leading to more elaborate fashion expressions and a difference in the states of mind, such as Korea pursuing to express love, and the United States pursuing loneliness.