• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2441-2443
• /
• 2005

최근 세계 여러 나라에서는 적정한 신뢰도나 경제성을 고려해 직류송전방식에 대한 관심이 날로 높아져 가고 있다. 우리나라도 부하가 밀집된 수도권으로 올라오는 송전선로의 병목현상으로 역률이나 주파수 등의 변화가 점점 심해지면서 전력계통의 신뢰도와 안정성에 문제가 발생할 수 있다. 본 연구에서는 우리나라 계통의 부하집중지역인 수도권을 대상으로 최적 직류 송전 경로를 임의로 선정하여, 직류 송전 방식을 건설하였을 때와 가공 송선 방식을 건설하였을 때의 건설비, 운영비, 유지보수 비용 등의 경제성을 비교 검토하고 이에 따른 장점과 단점을 분석함으로써 직류송전방식의 타당성을 검토해 본다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.275-277
• /
• 2004

Although Jeju island Is connected with main network system by HVDC cable line, it's network assumes the form of independent system in an operating point of view. Therefore Jeju needs it's own independent capacity expansion planning. Continuos growth of demand and increase of antiquated plants in Jeju requires additional generating capacity. This paper analyzes characteristics of two alternatives which include it's own expansion of facilities and capacity expansion of network system for Jeju island. Furthermore this paper evaluates economic efficiency of those alternatives and analyzes long-term program of demand-supply of electricity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1799-1801
• /
• 2005

최근 세계 여러 나라에서는 적정한 신뢰도나 경제성을 고려해 직류송전방식에 대한 관심이 날로 높아져 가고 있다. 우리나라도 부하가 밀집된 수도권으로 올라오는 송전선로의 병목현상으로 역률이나 주파수 등의 변화가 점점 심해지면서 전력계통의 신뢰도와 안정성에 문제가 발생할 수 있다. 본 연구에서는 우리나라 계통의 부하집중지역인 수도권을 대상으로 최적 직류 송전 경로를 임의로 선정하여, 직류 송전 방식을 건설하였을 때와 가공 송전 방식을 건설하였을 때의 건설비, 운영비, 유지보수 비용 등의 경제성을 비교 검토하고 이에 따른 장점과 단점을 분석함으로써 직류송전방식의 타당성을 검토해 본다.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.635-640
• /
• 2016

This paper dealt with the deterioration characteristics and an on-line diagnosis equipment for SPDs (surge protective devices). An accelerated aging test was carried out using a $8/20{\mu}s$ standard lightning impulse current to analyze the changes of electrical characteristics and to propose the diagnostic parameters and the criterion for deterioration of ZnO varistor which is the core component of SPDs. Based on the experimental results, an on-line diagnosis equipment for SPD was fabricated, which can measure the total leakage current, reference and clamping voltage. The leakage current measurement circuit was designed using a low-noise amplifier and a clamp type ZCT. A linear controller, the leakage current measurement part and a HVDC were used in the measurement of reference voltage. The measurement circuit of clamping voltage consisted of a surge generator and a coupling circuit. In a calibration process, measurement error of the prototype equipment was less than 3%.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1769-1776
• /
• 2016

For on-line partial discharge (PD) monitoring of rotating machines, a novel sensor is proposed, which can be installed on the power lead inside the terminal box of the machine. The sensor has been designed to have high capacitance, and minimal reflection of measured pulses. As a sensitivity of the sensor, transfer impedance $Z_t$ has been measured and compared to conventional coupler-type sensors. A simple method is presented for measuring $Z_t$ of coupler sensors, using a vector network analyzer and a practical lead-cable of rotating machine. Through this method, it became possible to measure the $Z_t$ of coupler sensors including the installation environment of them. The $Z_t$ of the proposed sensor is higher than that of same sized other conventional couplers at frequencies between 30 and 92 MHz. Another sensitivity test has been performed using a PD calibrator as a test pulse source. The proposed sensor has higher measured peak voltage than the conventional coupler type sensors when the same charges were input.

• 한국안전학회지
• /
• 제36권5호
• /
• pp.10-17
• /
• 2021

The controversy over the risk of the human body being affected by electromagnetic fields emitted from 60 Hz power lines continues without end. There are currently no new studies or research progress being made in this direction that is notable, and the number of civil complaints is gradually increasing. The problem is that each study produces different results, among which the effect of exposure to magnetic fields on childhood leukemia is a major one. In Korea, an electrician who was maintaining a 22.9 kV power line died of leukemia, which has recently been recognized as an occupational disease. Methods to reduce magnetic fields from power lines include shielding with wire loops, incorporating split phases and compaction techniques, installing underground power lines, converting to high-voltage direct current (HVDC), and increasing the ground clearance of transmission towers. Depending on whether a separate power supply is needed or not, there are two types of wire loops: passive loop and active loop. Magnetic field reduction is currently done through underground power lines; however, the disadvantage of this process is high construction costs. Installing passive loops, with relatively low construction costs, leads to lower magnetic field reduction rates than installing underground cables and a weakness to not solving the landscape problem. This methodological study aims at designing methods and reducing the effects of 2-wire set loops-the simplest and most practical. Since the method proposed in this study has been designed after analyzing the distribution of complex electromagnetic fields near the expected loop installation location, a practical design can be implemented without the need for any difficult optimization programming.