• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.85-86
• /
• 2013

This paper describes the physical configuration and features of the advanced control and protection devices, and operation control and monitoring system that are connected to a real time simulator for LS Industrial System 80kV 60 MW Jeju HVDC Pilot Project. Highlight of simulation result are provided to demonstrate the control and protection functionality.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.175-176
• /
• 2014

본 논문은 HVDC C&P 시스템에 적용된 이중화 기술 및 기능을 설명한다. LS산전은 2009년 HVDC 사업을 착수한 이래 HVDC Control and Protection(C&P) System을 개발해 왔으며 현재 2010년부터 한국전력공사와 협동연구로 진행하고 있는 HVDC 제주 실증단지에 적용하여 실증운전 중이다. 당사가 개발한 HVDC C&P 시스템은 시스템의 신뢰성 및 가용성을 높이기 위해 Fully Redundancy 시스템으로 구성되고 Hot Standby 방식으로 제어 및 보호 알고리즘을 수행한다. 본 논문에서는 HVDC C&P 시스템의 구성과 제어기 및 네트워크의 이중화 구조에 대해 소개 하고자 한다.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.219-221
• /
• 1999

HVDC(High Voltage Direct Current) transmission system was constructed between Cheju island and mainland Haenam and has been operating commercially since 1998. But research activities in this area are not so much. That is caused by the facts that HVDC is large scale system and it is not so easy to implement and to test. Though such simulation tools as RTDS(Real Time Digital Simulator) and EMTDC can be useful, these have limitations for actual control and protective system design. Therefore scaled-down HVDC model was developed for the purpose of researches at operating technique, control and protection methods. The design of this model was based on real Cheju-Haenam HVDC system. And additionally faults simulator such as ground fault, short-circuit and change of impedance in transmission line is equipped for analysis of these faults. Control system of the model was implemented fully digitally. So it is very easy for the researchers to develope control and protection algorithm and to test the performance.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.125-126
• /
• 2014

본 논문에서는 실시간 자바를 사용하여 초고압 송전 설비의 제어 및 보호 장치의 구현에 대해 고찰 하고자 한다. 초고압 송전 설비는 대단위 시스템이라서 객체 지향 프로그래밍이 유리하지만, 실시간 운영체제 상에서 고속으로 실시간 동작을 해야 하므로 객체지향 프로그래밍이 모순 된다 할 수 있다. 실시간 자바를 통해서 대형 HVDC 시스템에서 객체 지향 설계의 유연함과 고속 실시간 시스템을 구현 할 수 있는 장점을 동시에 가질 수 있는 방법에 대해 고찰 해 보자.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.243-244
• /
• 2013

This paper introduces the application of Profibus field bus communication in HVDC power system. Discusses about the configuration of HVDC system and the structure of control and protection system. Analyzes and designs the network configuration of field device level. Using OPAS engineering tool to config IO system and at the same time monitor data in SCADA HMI.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.185-186
• /
• 2012

본 논문에서는 HVDC C&P(High Voltage Direct Current Control and Protection) 시스템의 네트워크 이중화 방법을 제안한다. 본 논문에서 제안하는 HVDC C&P 시스템 네트워크 이중화 방법은 2개의 이더넷 라인을 제어기에 직접 연결하고, 연결된 라인으로 동시에 정보를 송신하여, 제어기에서 정보를 필터링하여 사용하는 방법을 사용한다. 또한 네트워크 라인의 효과적인 결선 체크를 위해 제어기간 송수신을 통해 네트워크 라인의 결선을 체크하는 방법을 사용한다. 위와 같은 방법은 HVDC C&P 시스템의 네트워크 안정성을 향상시키는 효과를 기대할 수 있다.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.105-113
• /
• 2018

This paper proposes pre-analysis on planning of high-voltage direct current (HVDC) transmission system applied to Korea electric power grid. HVDC transmission system for interface lines has been considered as alternative solution for high-voltage AC transmission line in South Korea since constructing new high-voltage AC transmission lines is challenging due to political, environmental and social acceptance problems. However, the installation of HVDC transmission system as interface line in AC grid must be examined carefully. Thus, this paper suggests three scenarios to examine the influences of the installation of HVDC transmission system in AC grid. The power flow and contingency analyses are carried out for the proposed scenarios. Power reserves in metro area are also evaluated. And then the transient stability analysis focusing on special protection scheme (SPS) operations is analyzed when critical lines, which are HVDC lines or high voltage AC lines, are tripped. The latest generic model of HVDC system is considered for evaluating the impacts of the SPS operations for introducing HVDC system in the AC grid. The analyses of proposed scenarios are evaluated by electromechanical simulation.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.241-242
• /
• 2013

본 논문에서는 메모리 데이터 베이스를 사용하여 초고압 송전 설비의 제어 및 보호 장치의 데이터 이중화 기법에 대해 고찰 하고자 한다. 초고압 송전 설비는 항시 전력을 공급해야 하므로 제어 및 보호 장치의 이중화는 선택이 아닌 필수라 할 수 있겠다. 이중화 기법중에서 메모리 데이터 베이스를 이용한 고속 데이터 이중화 기법에 관해 고찰 하고자 한다. 메모리 데이터 베이스를 이용하는 방법 이외에도 여러 이중화 방법이 있으나 메모리 데이터 베이스를 이용하면 여러가지 장점을 지니고 있어 편리한 데이터 이중화 구현이 가능 하다.

• KIPE Magazine
• /
• v.17 no.2
• /
• pp.45-49
• /
• 2012

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.594-600
• /
• 2017

HVDC transmission systems can be configured in many ways to take into account cost, flexibility and operational requirements. [1] For long-distance transmission, HVDC systems may be less expensive and suffer lower electrical losses. For underwater power cables, HVDC avoids the heavy currents required to charge and discharge the cable capacitance of each cycle. For shorter distances, the higher cost of DC conversion equipment compared to an AC system may still be warranted, due to other benefits of direct current links. HVDC allows power transmission between unsynchronized AC transmission systems. Since the power flow through an HVDC link can be controlled independently of the phase angle between the source and the load, it can stabilize a network against disturbances due to rapid changes in power. HVDC also allows the transfer of power between grid systems running at different frequencies, such as 50 Hz and 60 Hz. This improves the stability and economy of each grid, by allowing the exchange of power between incompatible networks. This paper proposed to establish Korean HVDC technology through a cooperative agreement between KEPCO and LSIS in 2010. During the first stage (2012), a design of the ${\pm}80kV$ 60MW HVDC bipole system was created by both KEPCO and LSIS. The HVDC system was constructed and an operation test was completed in December 2012. During the second stage, the pole#2 system was fully replaced with components that LSIS had recently developed. LSIS also successfully completed the operation test. (2014.3)