• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1238-1239
• /
• 2011

For the domestic railways, we carry out the speed-up project for the maximum speed, came out of the plan on the schedule speed improvement, such as the Gyeongbu HSR 1st and 2nd step project and the speed-up project of the major trunk railways. As the speed increase, we shall review the conventional calculation methods for braking distances and identify the increase of braking distances. In this way, we shall secure the safe braking distances.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.160-166
• /
• 2005

In this paper, the combined system equation of motion, which can analyze the dynamic interaction between pantograph and catenary system, is derived by adopting absolute nodal coordinates and rigid body coordinates. The analysis results are compared with real experiment data from test running of Korean high-speed train (HSR 350x). In addition, a computation method for the dynamic stress of contact wire is presented using the derived system equation of motion. This method might be good example and significant in that the structural and multibody dynamics model can be unified into one numerical system.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.1
• /
• pp.37-48
• /
• 2021

A new high speed rotation type-passive sampling device (HSR-PSD), which can rotate seawater at high speed and absorb easily and quickly the freely dissolved hydrophobic organic contaminants from seawater, was developed and then applied around the Korean Peninsula. Freely dissolved concentrations (Cfree) of polycyclic aromatic hydrocarbons (PAHs) were determined using the HSR-PSD with low density polyethylene (LDPE) sheets as a passive sampler. Furthermore, dissolved concentrations (Cdissolved) of PAHs in seawater were also obtained from high volume water sampling as a conventional method to account for actual bioavailability. When the LDPE sheets were rotated in the HSR-PSD at 900 rpm, PAHs with log KOW 3.4 ~ 5.2 were equilibrated between the LDPE and water in 5 hours. Although the high molecular weight PAHs with log KOW 5.6 ~ 6.8 was expected to be 2 to 30 days to reach the equilibrium, the Cfree of the PAHs at equilibrium could be corrected using performance reference compounds in 5 hours. Meanwhile, the total Cfree of PAHs were from 0.32 to 1.2 ng/L, which were higher than reported values in other oceans, but lower than in coastal water such as estuary, harbor, or shore. A bioavailability from the detected PAHs was highest at the sampling line near the dumping site of the Yellow Sea. Predicted residual concentrations in biota were relatively higher in offshore including the dumping site than in coastal regions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.2
• /
• pp.185-192
• /
• 2017

In this paper, we reviewed major design parameters for a solid type of deployable antenna and its structural design. We performed modal analysis for a single reflector panel made of aluminum and CFRP (carbon fiber reinforced plastic) to confirm the appropriateness of selected materials. We then predicted the elastic modulus of CFRP using the principles of unidirectional composite elasticity stiffness predictions such as the ROM (Rule of Mixture) and HSR (Hart Smith 10% Rule). To optimize the shape of the antenna reflector, a structural stiffness analysis was performed using derived numerical optimization factors. Six structural stiffness analyses were performed using the constructed experimental design method. The resulting optimal shape conditions are proposed to meet the structural stiffness requirements while minimizing weight.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.469-480
• /
• 2017

On April 1, 2004, KTX (Korea Train eXpress), the first HSR (High-Speed Rail) in Korea, was introduced to Gyeongbu Line. The introduction of the KTX service led to a change in the number of passengers for Gyeongbu Line. Previous studies have analyzed the pre and post-event changes of the intervening events by either simple statistics or intervention ARIMA analysis. However, the intervention ARIMA model has a limitation that several assumptions such as the occurrence time and the type of intervention events are necessary. To this end, this study analyzed the effects of intervention event on the number of passengers using the Gyeongbu line based on a time series outlier detection technique which can overcome limitations in the previous studies. The time series outlier detection technique can analyze the time, effect type and size of an intervention event without the assumption of the time and effect type of the intervention event. The data were collected from the Korea Transport Database (KTDB) for twelve years from 2003 to 2014 (144 months). The analysis results showed that the size of the influence type in the same intervention events was different across the major city routes, and the intervention event which could not be found by previous study methods was also found.

• Wind and Structures
• /
• v.27 no.1
• /
• pp.29-40
• /
• 2018

To investigate the characteristics of the combined wind field produced by the natural wind field and the train-induced wind field on the bridge, the aerodynamic models of train and bridge are established and the overset mesh technology is applied to simulate the movement of high-speed train. Based on ten study cases with various crosswind velocities of 0~20 m/s and train speeds of 200~350 km/h, the distributions of combined wind velocities at monitoring points around the train and the pressure on the car-body surface are analyzed. Meanwhile, the difference between the train-induced wind fields calculated by static train model and moving train model is compared. The results show that under non-crosswind condition, the train-induced wind velocity increases with the train speed while decreases with the distance to the train. Under the crosswind, the combined wind velocity is mainly controlled by the crosswind, and slightly increases with the train speed. In the combined wind field, the peak pressure zone on the headstock surface moves from the nose area to the windward side with the increase of wind velocity. The moving train model ismore applicable in analyzing the train induced wind field.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.33-52
• /
• 1998

본 연구에서는 국토동남권의 인구와 고용에 따른 공간구조 변화과정을 분석하고 향후 경부고속철도 건설에 따른 변화를 예측하였다. 본 연구의 공간범위는 양산시, 울산시, 경주시, 포항시를 대상지역으로 한 총 52개 지역공간을 기초분석 단위로 하였다. 국토동남권내 인구와 고용의 공간구조를 분석 전망하기 위하여 공간구조 측정방법인 로렌쯔곡선측정식, 중심성측정식, 접근도측정식등의 기법을 이용하였으며 공간적 집중과 분산의 정도를 전망하였다. 본 연구에서는 1970년부터 1994년까지 인구와 고용구조를 조사하여 공간구조의 변화과정을 분석하였다. 그리고 현재까지 계획된 건설 공정을 바탕으로 개통 예정시점인 2006년부터 2016년까지의 국토동남권 공간구조를 전망하기 위하여 3가지 시나리오에 따라 인구와 고용의 공간구조 변화를 예측하였다. 시나리오(1)은 경부고속철도의 서울-대구 구간을 우선적으로 건설하여 운행하고 대구-부산 구간은 경부철도의 기존선을 전철화하여 활용하는 방안이다. 시나리오(2)는 경부고속철도를 기본계획과 같이 2006년 완공하고 국토동남권내 1개 정차역인 경주시 건천역을 개통하였을 경우이다. 시나리오(3)은 시나리오(2)와 같은 조건하에서 국토동남권내 2개 정차역인 건천역과 울산역을 개통하였을 경우이다. 시나리오 (2)와 (3)의 경우는 일본 시즈오카현 노선을 경유하는 신간선 주변의 지역공간 특성이 우리나라 국토동남권과 유사함을 근거로 신간선개통전과 개통후의 지역공간 변화를 분석하여 본 연구와 비교하였다.

• Structural Engineering and Mechanics
• /
• v.82 no.1
• /
• pp.31-40
• /
• 2022

In structural engineering, the material properties of the structures such as elastic modulus, shear modulus, density, and size may not be deterministic and may vary at different locations. The dynamic response analysis of such structures may need to consider these properties as stochastic. This paper introduces a stochastic finite element method (SFEM) approach to analyze moving loads problems. Firstly, Karhunen-Loéve expansion (KLE) is applied for expressing the stochastic field of material properties. Then the mathematical expression of the random field is substituted into the finite element model to formulate the corresponding random matrix. Finally, the statistical moment of the dynamic response is calculated by the point estimation method (PEM). The accuracy and efficiency of the dynamic response obtained from the KLE-PEM are demonstrated by the example of a moving load passing through a simply supported Euler-Bernoulli beam, in which the material properties (including elastic modulus and density) are considered as random fields. The results from the KLE-PEM are compared with those from the Monte Carlo simulation. The results demonstrate that the proposed method of KLE-PEM has high accuracy and efficiency. By using the proposed SFEM, the random vertical deflection of a high-speed railway (HSR) bridge is analyzed by considering the random fields of material properties under the moving load of a train.

• Structural Engineering and Mechanics
• /
• v.90 no.1
• /
• pp.41-49
• /
• 2024

In recent years, China's high-speed railway (HSR) line continues to expand into seismically active regions. Analyzing the features of earthquake rail irregularity is crucial in this situation. This study first established and experimentally validated a finite element (FE) model of bridge-track. The FE model was then combined with earthquake record database to generate the earthquake rail irregularity library. The sample library was used to construct a model of desired earthquake rail irregularity based on signal processing (SFT) and hypothesis principle. Finally, the effects of random pier height and random span number on desired irregularity were analyzed. Herein, an equivalent method of calculating earthquake rail irregularities for random structures was proposed. The results of this study show that the amplitude of desired irregularity is found to increase with increasing pier height. When calculating the desired irregularity of a structure with unequal pier heights, the structure can be regarded as that with equal pier heights (taking the largest pier height). For a structure with the span number large than 9, its desired irregularity can be considered equal to that of a 9-span structure. For the structures with both random pier heights and random span number, their desired irregularities are obtained by equivalent calculations for pier height and span number, respectively.

• Korean Journal of Ichthyology
• /
• v.36 no.2
• /
• pp.139-155
• /
• 2024

Using the cytb gene region of the mitochondrial DNA of eight populations of Sarcocheilichthys nigripinnis morii and five populations of S. variegatus wakiyae, which belong to the genus Sarcocheilichthys from Korea, the genetic diversity and molecular phylogenetic relationships of each population were examined. As a result of the analysis, it was confirmed that the S. variegatus wakiyae population had higher genetic diversity than the S. nigripinnis morii population. In the phylogenetic tree of genus Sarcocheilichthys fish in Korea based on the cytb gene, the Yeongsan River (YSR) population of S. variegatus wakiyae forms a clade with the Tamjin River (TJR), Yeongsan River (YSR), and Seomjin River (SJR) population of S. nigripinnis morii, and genetic relationships that do not align with the current classification system were observed. Meanwhile, on the nuclear DNA phylogenetic tree, S. variegatus wakiyae and S. nigripinnis morii could be clearly distinguished, showing mitonuclear inconsistency where mitochondrial and nuclear DNA conflicted on the phylogenetic tree. The Seomjin River (SJR) population of S. nigripinnis morii was translocated to the Dongjin River (DJR) population, haplotype from which crossbreeding was presumed to have occurred was confirmed. Among the rivers flowing into the East Sea, the S. nigripinnis morii population is known to have been introduced and inhabit only the Hyeongsan River (HSR), and it is presumed to be a population formed by translocation from the Han River (HR) population, with a haplotype representing a unique genetic group also confirmed. The Han River (HR), Geum River (GR), and Mangyeong River (MGR) populations of S. nigripinnis morii formed a genetically identical population with S. czerskii and S. soldatovi distributed north of the Yalu River, and accordingly, a taxonomic reexamination was required through morphological and molecular phylogenetic studies by securing various specimens.