• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.554-562
• /
• 2007

22mm까지의 두께를 갖는 HR Plate의 사용량을 증대시키기 위해서는 HR Plate가 강교량의 주부재를 포함한 모든 부재에 적용되는 것이 요망되어진다. 본 연구에서는 HR Plate의 적용가능 폭을 갖는 경량전철 협폭 박스거더의 가능성을 검토하였다. 빔요소와 플레이트 요소를 적용한 15개 경량전철 교량 모델들에 대해 풀모델링과 서부모델링을 적용하여 전산 구조해석을 수행하였다. 해석결과 HR Plates의 협폭박스거더는 경량전철에 적용될 수 있다는 것을 확인하였다.

• 한국공간구조학회논문집
• /
• 제7권4호
• /
• pp.63-72
• /
• 2007

국내외적으로, 특히 중국에서 철강산업의 수요증대로 철판의 가격이 다른 재료에 비하여 급격하게 상승되고 있다. 열연 코일로부터 만들어지는 HR Plate는 후판에 비하여 가격이 저렴하다. 본 연구에서는 HR Plate의 재료특성을 검토하고, 강교에서 부부재와 주부재로서 HR Plate의 적용성을 연구하였다. 연구결과 일반 후판과 HR Plate는 두께 22mm까지 절단, 조립성, 용접 등의 특성에 있어서 차이가 없었다. 강박스교량의 부부재로서 사용율과 손실율은 각각 $10{\sim}15%,\;10{\sim}l5%$로 조사되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.365-375
• /
• 2006

The HR Plates made hot rolled coils is lower than general structural steel plates in price. No difference between general steel plates and HR Plates with thickness up to 22mm are found in most characters such as cutting operation, fabrication and even welding. It can be concluded that HR Plates with thickness up to 22mm can be applied to flanges and webs of any girders as well as longitudinal ribs, longitudinal and vertical stiffeners of steel bridges appropriately. To increase the demand of HR Plates with thickness up to 22mm, it is necessary that HR Plates is applicable to full member in steel bridge including main girder.In this study, availabilities of the narrow steel box girder of light railway transit with HR Plate width as a main member are discussed. For application of HR Plate to steel bridge with 50m span or more, new support systems in three types are presented. Computational analysis is performed in 15 bridge models of light railway transit with beam element and plate element. As a analysis results, three models in light railway transit are presented. We finally come to the conclusion that HR Plates can be apply to narrow steel box girder in the light railway transit.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.263-271
• /
• 2006

In this study, $20\;Nm^3/hr$ scale compact hydrogen generator which can be apply to the hydrogen station was manufactured and tested. The design of $20\;Nm^3/hr$ scale compact hydrogen generator was upgraded on the base of $5\;Nm^3/hr$ scale plate hydrogen generator concept stacking the plate reactors. Ideas for improving system efficiency such as heat recovery from the exhaust, exhaust duct which is especially design for plate type reactor, reinforcement of insulation, enlargement of heat exchange area of reactor, introduction of desulphurizer reactor and PROX rector in a compact design etc. were applied. From the performance test, we can learn that the $20\;Nm^3/hr$ scale compact hydrogen generator can be operated steadily at 100% road condition and the methane conversion of over 94%(at S/C=3.75) was obtained. This result shows that the concept of plate type hydrogen generator can be scale-up to the $20\;Nm^3/hr$ scale and fit for hydrogen generator for on site hydrogen station application.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.37-42
• /
• 2006

In this study, $20Nm^3/hr$ scale compact hydrogen generator which can be apply to the hydrogen station was tested for hydrogen station application. $20Nm^3/hr$ scale compact hydrogen generator was developed by upgrading concept of stacking plate reactor from former $20Nm^3/hr$ scale plate hydrogen generator. concepts for improving system efficiency and performance include such as idea of heat recovery from the exhaust, exhaust duct which is especially design for plate type reactor reinforcement of insulation, enlargement of heat exchange area of reactor, introduction of desulphurizer reactor and PROX rector in a compact design, introduction of back fire protection structure of plate burner and so on, We can learn that final prototype of scale-up $20Nm^3/hr$ scale compact hydrogen generator can be operated steadily in 100% road at which over 94% of methane conversion(S/C=3.75) was obtained. In case of making up the weak point, we expect that it is possible to apply to hydrogen station by way of showing an example.

• 대한기계학회논문집A
• /
• 제39권5호
• /
• pp.467-471
• /
• 2015

최근까지, 전자제품에 사용되는 솔더는 납성분이 남아 있으며, 전자부품 및 시스템의 무연 (Pb-free) 솔더에 대한 관심은 반도체 및 전자산업에서 증가하고 있다. 본 논문에서 사용된 솔더접합부는 Sn-37Pb, Sn-4Ag 및 Sn-4Ag-0.5Cu/Ni 기판 이다. 인공시효처리는 $150^{\circ}C$에서 각각 0hr, 100hr, 200hr, 400hr, 600hr 그리고 1000hr 동안 수행되었으며, SP 시험을 이용해 $30^{\circ}C$와 $50^{\circ}C$에서 접합강도를 평가했다. 전단강도는 인공시효시간과 온도가 증가함에 따라 전반적으로 감소하였다. 무연솔더는 Sn-37Pb 보다 총파괴 에너지가 높았으며, Sn-4Ag-0.5Cu/Ni 접합부는 고온에서 기계적 물성치가 가장 우수하였다.

• 한국미생물·생명공학회지
• /
• 제13권4호
• /
• pp.409-415
• /
• 1985

시판 어육연제품의 보장성과 식품위생학적인 기초자료를 얻고자 1984년 5월부터 10월사이에 연제품 가공공장과 수퍼마켓등에서 구입한 게맛살, 판어묵, 부들어묵, 튀김어묵 및 어육소시지등 5종총 70점의 시료를 대상으로 세균학적 품질, 세균특징별 분포, 내열성세균의 배양적 세균학적 특성에 관하여 조사한 결과는 다음과 같다. 1. 가열후에 포장하는 부들어묵과 튀김어묵은 위생지표세균 및 효모와 곰팡이의 오염이 대체로 높았으며, 가열전에 포장하는 게맛살과 판어묵은 세균학적으로 매우 깨끗하였다. 포도상구균은 튀김어묵에서만이 검출되었으며, Salmonella균은 모든 제품에서 검출되지 않았다. 가공공장 시료에서 연제품 가공공정중 열처리전의 게맛살과 판어묵 시료중에 호기성 및 염기성균이 $10^{6}$-$10^{7}$ g으로 함량이 높았으나, 열처리직후의 제품은 호기성균이 ＜$10^2$/g 이었으며 염기성균은 검출되지 않았다. 그리고 어육소시지에서는 전혀 세균이 검출되지 않았다. 2. 분리된 세균중 단백질분해능이 있는 세균의 분포는 대부분의 시료에서 87% 이상으로 높았고, 지방분해능이 있는 세균의 분포는 20%미만이었다. 3. 분리된 세균에 대한 Gram 염색결과는 게맛살과 판어묵에서는 Gram양성균이 70%이상이었고 튀김어묵에서는 47.3%이었으며, 형태별로는 간균이 분리균주의 90%이상을 차지하였다. 4. 분리균중 내열성이 제일 강한 균주는 Bacillus licheniformis CR-11이었는데, 단백질분해능이 있을 뿐 아니라 2$0^{\circ}C$이상에서는 발육이 양호하였으며 또한 염기적 조건에서도 발육이 좋았다. 5. CR-11 균주의 배양온도별 비증식속도와 평균세대시간은 2$0^{\circ}C$에서 각각 0.31$hr^{-1}$, 2.24hr, 3$0^{\circ}C$에서 0.64$hr^{-1}$, 1.09hr, 그리고 35$^{\circ}C$에서는 0.78$hr^{-1}$, 0.89hr이었고, 포자의 내열성은 D$_{85}$ $^{\circ}C$=41.9min, D$_{90}$ $^{\circ}C$=27.9min, D$_{95}$ $^{\circ}C$=10.2min, D$_{100}$ $^{\circ}C$=4.3min이었으며, Z-value는 13.8$^{\circ}C$이었다.

• 한국세라믹학회지
• /
• 제16권4호
• /
• pp.206-212
• /
• 1979

The phase relations and microstructure appeared at 1700℃ in a system of Si3N4-Al2O3-SiO2 were studied. The samples were pressurelessly sintered at 1700℃ for 1hr and reheated at 1600℃ for 1hr under nitrogen atmosphere. The compounds formed were identified by X-ray diffraction method and the microstrues were observed by SEM. The stable phases appeared in this system were X-phase, Si2ON2, β'-Si3N4 and Mullite. From the results of those experiments, it was concluded that the X-phase has very close composition to that proposed by G, K. Layden, Si3Al6O12N2. SEM photographs showed that Si2ON2 was a plate phase and X-phase was a rectagular plate phase.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.98-101
• /
• 2003

The pilot scale experiment was performed to investigate phosphorus and nitrogen removal from sewage by intermittently activated sludge process combined with the electrochemical interaction (Localized Corrosion) of aluminum and silver. The average T-N removal rate for HRT of 24hr was 57.4%. It was possible to remove P in sewage to under 1 mg/L with a short HRT of 12 hr using Al and Ag plate but often required additional A1 plate supplement during the operation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.108-116
• /
• 2003

In this paper, the experimental results of condensation heat transfer were reported for the plate and shell heat exchangers(P&SHE) using R-l34a. An experimental refrigerant loop has been established to measure the condensation heat transfer coefficient of R-l34a in a vertical P&SHE. Two vertical counter flow channels were formed in the P&SHE by three plates of geometry with a corrugated trapezoid shape of a chevron angle of 45$^{\circ}$. Downflow of the condensing R-l34a in one channel releases heat to the cold up flow of water in the other channel. The effect of the refrigerant mass flux, average heat flux, system pressure and vapor quality of R-l34a on the measured data were explored in detail. The results indicate that at a higher vapor quality the condensation heat transfer coefficients are significantly higher. Condensation heat transfer coefficients were increased when the refrigerant mass flux was increased. A rise in the average heat flux causes an slight increase in the hr. Finally, at a higher system pressure the hr is found to be lower. Correlation is also provided for the measured heat transfer coefficients in terms of the Nusselt number.