• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.13-18
• /
• 2005

PLA/LPCL/HPCL blend fibers composed of poly (lactic acid) (PLA), low molecular weight poly ($\varepsilon$-caprolactone) (LPCL), and high molecular weight poly ($\varepsilon$-caprolactone) (HPCL) were prepared by melt blending and spinning for bioab­sorbable filament sutures. The effects of blending time and blend composition on the X-ray diffraction patterns and tensile properties of PLA/LPCL/HPCL blend fibers were characterized by WAXD and UTM. In addition, the effect of in vitro degra­dation on the weight loss and tensile properties of the blend fibers hydrolyzed during immersion in a phosphate buffer solu­tion at pH 7.4 and 37$^{\circ}C$ for 1-8 weeks was investigated. The peak intensities of PLA/LPCL/HPCL blend fibers in X-ray diffraction patterns decreased with an increase of blending time and LPCL contents in the blend fibers. The weight loss of PLA/LPCL/HPCL blend fibers increased with an increase of blending time, LPCL contents, and hydrolysis time while the tensile strength and modulus of the blend fibers decreased. The tensile strength and modulus of the blend fibers were also found to be increased with an increase of HPCL contents in the blend fibers. The optimum conditions to prepare PLA/LPCL/HPCL blend fibers for bioabsorbable sutures are LPCL contents of $5 wt\%, HPCL contents of $35 wt\%, and blending time of 30 min. The strength retention of the PLA/LPCL/HPCL blend fiber prepared under optimum conditions was about $93.5\% even at hydrolysis time of 2 weeks.

• Fibers and Polymers
• /
• v.4 no.2
• /
• pp.59-65
• /
• 2003

PLA/LPCL/HPCL blends composed of poly(lactic acid) (PLA), low molecular weight poly($\varepsilon$-caprolactone) (LPCL), and high molecular weight poly($\varepsilon$-caprolactone) (HPCL) were prepared by melt blending for bioabsorbable fila-ment sutures. The effects of blend composition and blending time on the ester interchange reaction by alcoholysis in the PLA/LPCL/HPCL blends were studied. Their thermal properties and the miscibility due to the ester interchange reaction were investigated by $^1{H-NMR}$, DSC, X-ray, and UTM analyses. The hydroxyl group contents of LPCL in the blends decreafed by the ester interchange reaction due to alcoholysis. Thus, the copolymer was formed by the ester interchange reaction at $200^{\circ}C$ for 30-60 minutes. The thermal properties of PLA/LPCL/HPCL blends such as melting temperature and heat of fusion decreased with increasing ester interchange reaction levels. However, the miscibility among the three poly-mers was improved greatly by ester interchange reaction. Tensile strength and modulus of PLA/LPCL/HPCL blend fibers increased with increasing HPCL content, while the elongation at break of the blend fibers increased with increasing LPCL content.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.332-337
• /
• 2011

Physicochemical properties of hydroxypropylated and cross-linked (HPCL) rice starch were investigated. Dual modification of rice starch was carried out by hydroxypropylation using propylene oxide (2, 6, and 12%) and then crosslinking using phosphorus oxychloride (0.005% and 0.02%). Swelling power of dual-modified rice starch increased at lower temperature (60$^{\circ}C$) than that of native rice starch (70$^{\circ}C$). HPCL rice starch showed slightly lower solubility (1.6-6.1%) than native rice starch (2.2-13.8%). Solubility and swelling power tended to gradually increase with increasing phosphorus oxychloride contents. RVA pasting temperature (66.2-70.8$^{\circ}C$) and peak viscosity (160.6- 171.1 RVU) of HPCL rice starch were lower than that of those of native starch (71.3$^{\circ}C$, 190.4 RVU) and decreased with increasing propylene oxide concentration. DSC thermal transitions of HPCL rice starches shifted to lower temperature and show less amylopectin melting enthalpy (11.8-9.8 J/g) than that of native rice starch (11.9 J/g). Overall, physicohemical properties of HPCL rice starches were highly dependent on hydroxypropylation rather than crosslinking.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.7
• /
• pp.379-386
• /
• 2004

We designed a portable parallel library HPCL(High Performance Computing Library) with following objectives: (1) to provide a close relationship between the parallel code and the original sequential code that will help future versions of the sequential code and (2) to enhance performance of the parallel code. The library is an interface written in C and Fortran programming languages between MPI(Message Passing Interface) and parallel programs in Fortran. Performance results were determined on clusters of PC's and IBM SP4.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.2
• /
• pp.164-170
• /
• 2000

10 carbamate pesticides were surveyed in domestic and imported green peas, beans, red beans from March 1999 through December 1999. Samples were collected from Gwangju, Mokpo, Suncheon and Yosoo grain markets. This study was performed by post-column ο-phthalaldehyde and 2-mercaptoethanol prior to HPCL fluorophore detection. Pesticides were found in 14 of 80 samples(17.5%). The kinds of pesticide detected in green peas were methomyl, MTMC, carbaryl, those in sesames were oxamyl, carbofuran, carbaryl, 1-naphthol, MIPC, those in beans were oxamyl, MTMC, carbaryl and those in red beans were MTMC, carbaryl. The range of residues detected in green peas, sesames, beans and red beans were 0.002∼0.025ppm, 0.001∼0.469ppm, 0.005∼0.356ppm and 0.017∼0.125ppm, respectively. The most frequently detected pesticides were MTMC(6 times) and carbaryl(5 times), while aldicarb, PHC and BPMC were no detected in all samples. Detection frequencies of carbamate pesticides in imported crops were higher than those in domestic ones except red beans. Only one result of oxamyl residues determined in imported bean was higher than the proposed maximum residue limits of Codex, which was 0.356ppm.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.3
• /
• pp.257-265
• /
• 2010

In this study, the residual levels of four insecticidal compounds (lambda-cyhalothrin, lufenuron, thiamethoxam, and clothianidin) were monitored in the pomegranate, in order to assess the risk to consumers posed by the presence of such residues. The insecticides were applied at the recommended dose rates onto pomegranate trees. The samples were then collected at harvesting time after several treatments (two, three, and four treatments). After sample preparation progressed through the clean-up procedure, lufenuron, thiamethoxam, and clothianidin residues were analyzed via a HPCL-UVD, and the lambda-cyhalothrin residue was analyzed via a GC-${\mu}ECD$. The versatility of this method was evidenced by its excellent linearity (>0.9998 to 1) at broad concentration ranges. The mean recoveries evaluated from the untreated sample spiked with two different fortification levels ranged from 72.45 to 113.90%, and the repeatability (as a relative standard deviation) resulted from triplicate recovery tests was in a range from 0.80 to 11.75%. The residues of all insecticides determined from treated pomegranate samples and their LOD levels (lunfenuron, 0.01; lambda-cyhalothrin, 0.005; thiamethoxam, 0.01; clothianidin, 0.02 mg/kg) were much lower than their MRLs (0.5 mg/kg).

• Korean journal of food and cookery science
• /
• v.7 no.1
• /
• pp.45-51
• /
• 1991

In this study, several standard fatty acids were analyzed by three analysis instruments. And also, for the two kinds of soybean oils, fatty acids compositions were determined by three instruments. The results were obtained as follows: 1. In the case of Gas Chromatography (GC), standard fatty acids (Myristic, Stearic, Linoleic, Linolenic, Arachidonic acid) were determined with high reproducibility, but oleic acid/elaidic acid were not seperated. By Capillary Gas Chromatography (CGC), most of standard fatty acids were determined with very high reproducibility than saturated fatty acids, and palmitic acid/oleic acid were not seperated. 2. In the analytical ability of cis-trans fatty acids isomer (oleic acid/elaidic acid), CGC was shown better analytical ability of geometrical isomer than HPLC. Oleic acid/elaidic acid were not seperated by packed column (15% DEGS). The rquire time for standard fatty acids analysis was as follows; GC, 7.21 min., CGC, 9.84 min., HPLC, 24.48 min. 3. The major compositions of fatty acids of each soybean oil (CSOY; refined, DSOY; unrefined) by GC and CGC were linoleic acid, oleic acid, palmitic acid, linolenic acid and stearic acid. But in the case of HPLC, palmitic acid/oleic acid were not seperated. Analytical ability of three instruments on fatty acids composition in each soybean oil was same trend as in the standard fatty acids mixture.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.174-179
• /
• 2002

A simple and sensitive analysis method based on reverse phase (RP) HPCL with flourescence detector was developed for simultaneous determination of bisphenol A (BPA), bisphenol F (BPF), bisphenol A diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE), and their degradation products, $BADGE{\cdot}H_2O$, $BADGE{\cdot}2H_2O$, $BFDGE{\cdot}H_2O$, $BFDGE{\cdot}2H_2O$, $BADGE{\cdot}HCl{\cdot}H_2O$, $BADGE{\cdot}HCl$, $BADGE{\cdot}2HCl$, $BFDGE{\cdot}HCl{\cdot}H_2O$, $BFDGE{\cdot}HCl$ and $BFDGE{\cdot}2HCl$, which were hydrolyzed and chlorinated forms of BADGE and BFDGE, in canned foods and food simulants. These compounds were identified by GC/MSD with $MSTFA-NH_4I-DTE$ derivatization. Recovery study was performed at each 100 ng/mL levels of BPA, BPF, BADGE and BFDGE added to canned foods and food simulants. This method was resulted in recovery of $90{\sim}114%$ with relative standard deviation of $4.1{\sim}7.0%$, detection limits of $6{\sim}11$ ng/mL and quantitation limits of $12{\sim}18\;ng/mL$. Calibration curves were linear with correlatin coefficients of 0.997 for BPF, 0.996 for BPA, 0.9987 for BFDGE, and 0.9989 for BADGE.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.955-960
• /
• 2008

We investigated and estimated at the characteristics of decomposition and mineralization of benomyl using a design of experiment(DOE) based on the general factorial design in an E-beam process, and also the main factors(variables) with benomyl concentration(X$_1$) and E-beam irradiation(X$_2$) which consisted of 5 levels in each factor was set up to estimate the prediction model and the optimization conditions. At frist, the benomyl in all treatment combinations except 17 and 18 trials was almost degraded and the difference in the decomposition of benomyl in the 3 blocks was not significant(p > 0.05, one-way ANOVA). However, the % of benomyl mineralization was 46%(block 1), 36.7%(block 2) and 22%(block 3) and showed the significant difference of the % that between each block(p < 0.05). The linear regression equations of benomyl mineralization in each block were also estimated as followed; block 1(Y$_1$ = 0.024X$_1$ + 34.1(R$^2$ = 0.929)), block 2(Y$_2$ = 0.026X$_2$ + 23.1(R$^2$ = 0.976)) and block 3(Y$_3$ = 0.034X$_3$ + 6.2(R$^2$ = 0.98)). The normality of benomyl mineralization obtained from Anderson-Darling test in all treatment conditions was satisfied(p > 0.05). The results of prediction model and optimization point using the canonical analysis in order to obtain the optimal operation conditions were Y = 39.96 - 9.36X$_1$ + 0.03X$_2$ - 10.67X$_1{^2}$ - 0.001X$_2{^2}$ + 0.011X$_1$X$_2$(R$^2$ = 96.3%, Adjusted R$^2$ = 94.8%) and 57.3% at 0.55 mg/L and 950 Gy, respectively. A Microtox test using V. fischeri showed that the toxicity, expressed as the inhibition(%), was reduced almost completely after an E-beam irradiation, whereas the inhibition(%) for 0.5 mg/L, 1 mg/L and 1.5 mg/L was 10.25%, 20.14% and 26.2% in the initial reactions in the absence of an E-beam illumination.